Manufacturer no.
Description
Price
Anzahl Bestellen
Erico 170881 CADDY PCS2 wire clip
For securing cables and cable conduit without bending the hanging wire. Faster installation than traditional methods.
Sales unit: 100 pieces
Lieske Part No.: 1259971
Made to order · Delivery time approx. 20 workdays
info_outline
115,97 EURGraduated prices From pieces Price per pieces X 5 115,10 EUR 10 114,23 EUR 15 113,36 EUR 20 112,49 EUR
Erico 170910 CADDY M10TI flange threaded rod holder M10
Fastening cables or threaded rods to stone or concrete walls.
Sales unit: 100 pieces
Lieske Part No.: 678677
Made to order · Delivery time approx. 20 workdays
info_outline
172,25 EUR
Erico 171060 CADDY 4Z34812M cable protection conduit clip
Spring steel fastener with conduit clip that secures cables or conduit to threaded rods 1/2¿-3/4¿ EMT, 18 to 30mm to 1/4¿, M8 #12 thread, 4.8mm wire.
Sales unit: 100 pieces
Lieske Part No.: 2068142
Made to order · Delivery time approx. 20 workdays
info_outline
436,89 EURGraduated prices From pieces Price per pieces X 4 433,61 EUR 8 430,34 EUR 12 427,06 EUR 16 423,78 EUR
Erico 171120 CADDY AB mounting angle
Versatile mount for vertical and wall mounted applications to create a mounting point. Includes two 0.25¿, 6.3mm holes.
Sales unit: 100 pieces
Lieske Part No.: 2068226
Made to order · Delivery time approx. 20 workdays
info_outline
123,80 EUR
Erico 171130 CADDY 8P pipe clamp 18-22
The cable conduit is pressed into the clamp. Eliminates the need for compensating bends when laying cable conduit. Can be used for both vertical and horizontal installations.
Sales unit: 100 pieces
Lieske Part No.: 1317010
Made to order · Delivery time approx. 20 workdays
info_outline
161,22 EUR
Erico 171470 CADDY EER Clamp Zinc 0.8-3 mm
CADDY trapeze hangers for ceiling
Ceiling thickness max. 3 mm, Ø 6.8 mm
ERICO zinc coating
Type: Eyelet Ø 6.8 mm
Type: EER
Item: 100 ST.
Sales unit: 10 pieces
Lieske Part No.: 491189
14,32 EURGraduated prices From pieces Price per pieces X 15 14,21 EUR 30 14,11 EUR 70 14,00 EUR 100 13,89 EUR
Erico 171490 Caddy 16EM58 Flange Clip with Cable Protection Conduit
Chest tube clamp
lockable, EPZ
Flange thickness: 8-14 mm
Type: 16EM58
Package: 10 PCS.
Lieske Part No.: 281572
Delivery time from supplier's stock (ca.) 3 workdays
info_outline
6,63 EURGraduated prices From pieces Price per pieces X 25 6,48 EUR 50 6,33 EUR 100 6,18 EUR 250 6,03 EUR
Erico 171500 H-ST clamp 4H24ST3 galvanized
CADDY H-ST-clamp
ERICO zinc coating
Flange thickness: 3-8 mm
Maximum load: 75 kg Type: 4H24ST3
Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 667349
Made to order · Delivery time approx. 20 workdays
info_outline
421,80 EURGraduated prices From pieces Price per pieces X 4 418,64 EUR 8 415,47 EUR 12 412,31 EUR 16 409,15 EUR
Erico 171530 H-ST-Clip 4H58ST3 galvanized
CADDY H-ST-clamp ERICO zinc coating flange thickness: 8 -
4 mm Max load: 75 kg Type: 4H58ST3 item:
ST.
Lieske Part No.: 728584
Delivery time from supplier's stock (ca.) 2 workdays
info_outline
4,35 EURGraduated prices From pieces Price per pieces X 50 4,32 EUR 100 4,28 EUR 250 4,25 EUR 500 4,22 EUR
Erico 171560 threaded washer 6WN zinc-plated
CADDY threaded washers 6WN
outer Ø 32 mm, thread M6
ERICO zinc coating
Sales unit: 100 pieces
Lieske Part No.: 800134
Made to order · Delivery time approx. 20 workdays
info_outline
121,42 EURGraduated prices From pieces Price per pieces X 5 120,51 EUR 10 119,60 EUR 15 118,69 EUR 20 117,78 EUR
Erico 171640 CADDY 4H912ST3 H-ST clamp galvanized
CADDY H-ST-clamp
ERICO zinc coating
Flange thickness: 14-20 mm
Maximum load: 75 kg Type: 4H912ST3
Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 252338
Made to order · Delivery time approx. 20 workdays
info_outline
442,70 EURGraduated prices From pieces Price per pieces X 4 439,38 EUR 8 436,06 EUR 12 432,74 EUR 16 429,42 EUR
Erico 171680 CADDY 4G24M11 rotating clip with thread
For suspending installations from grid ceiling profiles. No tools required for installation. Fast, easy and safe twist installation. To reduce scratches on grid ceiling profiles. Nut sold separately.
Sales unit: 100 pieces
Lieske Part No.: 1317402
Made to order · Delivery time approx. 20 workdays
info_outline
261,63 EURGraduated prices From pieces Price per pieces X 4 259,67 EUR 8 257,71 EUR 12 255,74 EUR 16 253,78 EUR
Erico 171690 CADDY 122 clamp angled P4 122
Spring steel clip for fitting onto roof purlins, compensates for the angle of the purlin. Provides a portable hole. Side mounting.
Sales unit: 100 pieces
Lieske Part No.: 946723
Made to order · Delivery time approx. 20 workdays
info_outline
227,72 EURGraduated prices From pieces Price per pieces X 5 226,01 EUR 10 224,30 EUR 15 222,60 EUR 20 220,89 EUR
Erico 171700 CADDY 123 pipe clip 0–28 mm
Spring steel clip for fitting onto roof purlins, compensates for the angle of the purlin. Provides a method for attaching cable conduit and junction boxes to roof purlins. Attaches to the lower flange.
Sales unit: 100 pieces
Lieske Part No.: 446049
Made to order · Delivery time approx. 20 workdays
info_outline
224,73 EURGraduated prices From pieces Price per pieces X 5 223,04 EUR 10 221,36 EUR 15 219,67 EUR 20 217,99 EUR
Erico 171720 CADDY 20M24SM H-MSM clamp galvanized
Pipe diameter 35-42 mm flange thickness: 3-8 mm Type: 2 M24SM item:
ST.
Sales unit: 100 pieces
Lieske Part No.: 506738
Made to order · Delivery time approx. 20 workdays
info_outline
704,90 EURGraduated prices From pieces Price per pieces X 3 699,61 EUR 6 694,33 EUR 9 689,04 EUR 12 683,75 EUR
Erico 171730 CADDY 4G24M25 rotating clamp M6
For suspending installations from grid ceiling profiles. No tools required for installation. Fast, easy and safe twist installation. To reduce scratches on grid ceiling profiles. Nut sold separately.
Sales unit: 100 pieces
Lieske Part No.: 866156
Made to order · Delivery time approx. 20 workdays
info_outline
307,96 EUR
Erico 171740 CADDY 16EM24 EM-M clamp 3-8 mm
Chest tube clamp
lockable, EPZ
Flange thickness: 3-8 mm
Type: 16EM24
Package: 10 PCS.
Sales unit: 50 pieces
Lieske Part No.: 283877
Made to order · Delivery time approx. 20 workdays
info_outline
321,10 EURGraduated prices From pieces Price per pieces X 4 318,69 EUR 8 316,28 EUR 12 313,88 EUR 16 311,47 EUR
Erico 171800 EM-M clamp 20EM24 galvanized
Chest tube clamp closed, EPZ flange thickness: 3-8 mm Type: 2 EM24 item:
ST.
Sales unit: 50 pieces
Lieske Part No.: 808096
Made to order · Delivery time approx. 20 workdays
info_outline
384,75 EURGraduated prices From pieces Price per pieces X 4 381,86 EUR 8 378,98 EUR 12 376,09 EUR 16 373,21 EUR
Erico 171840 CADDY 4G24M11WH rotating clamp M6x11 painted
Quick and easy to install clip for a threaded pin fixing point in acoustic T-grid applications. For 24 mm T-grid with M6 x 11 mm threaded pin, white.
Sales unit: 100 pieces
Lieske Part No.: 768152
Made to order · Delivery time approx. 20 workdays
info_outline
395,08 EURGraduated prices From pieces Price per pieces X 4 392,12 EUR 8 389,15 EUR 12 386,19 EUR 16 383,23 EUR
Erico 171850 CADDY EM912S Clamp Zinc 14-20 mm
CADDY EM-SM clip
with grub screw M 6 x 11
ERICO zinc coating
Also available in stainless steel
Flange thickness: 14-20 mm
Max load 45 kg
Type: EM912SM
Quantity: 1 unit.
Lieske Part No.: 331955
Delivery time from supplier's stock (ca.) 3 workdays
info_outline
4,82 EURGraduated prices From pieces Price per pieces X 50 4,75 EUR 100 4,68 EUR 250 4,60 EUR 500 4,53 EUR
Erico 171855 CADDY EM1318SM mounting clip M6x11
Fastening element for hammering in, for threaded pin fastening of device boxes, devices and other applications to support flanges. Spring steel fastening, is attached to flanges from 21 to 28 mm, with M6 x 11 mm threaded pin.
Sales unit: 50 pieces
Lieske Part No.: 2068469
Made to order · Delivery time approx. 20 workdays
info_outline
242,45 EURGraduated prices From pieces Price per pieces X 5 240,63 EUR 10 238,81 EUR 15 236,99 EUR 20 235,18 EUR
Erico 171860 CADDY 4G24M16WH rotating clamp M6x16 mm
For suspending installations from grid ceiling profiles. No tools required for installation. Fast, easy and safe twist installation. To reduce scratches on grid ceiling profiles. Nut sold separately.
Sales unit: 100 pieces
Lieske Part No.: 536098
Made to order · Delivery time approx. 20 workdays
info_outline
418,36 EURGraduated prices From pieces Price per pieces X 4 415,22 EUR 8 412,08 EUR 12 408,95 EUR 16 405,81 EUR
Erico 171900 CADDY 4G16M16 clamp galvanized
CADDY 4G
6M clip ERICO zinc coating, painted white. Flange width 24-26 mm flange thickness
, 5 mm screw M 6 x
6 mm Type: 4G
6M
6 item:
ST.
Sales unit: 100 pieces
Lieske Part No.: 781553
Made to order · Delivery time approx. 20 workdays
info_outline
300,31 EURGraduated prices From pieces Price per pieces X 4 298,06 EUR 8 295,81 EUR 12 293,55 EUR 16 291,30 EUR
Erico 171950 CADDY 20EM58 EM-M clamp galvanized
Chest tube clamp
lockable, EPZ
Flange thickness: 8-14 mm
Type: 20EM58
Package: 10 PCS.
Lieske Part No.: 281803
Delivery time from supplier's stock (ca.) 5 workdays
info_outline
7,88 EURGraduated prices From pieces Price per pieces X 25 7,70 EUR 50 7,53 EUR 100 7,35 EUR 250 7,17 EUR
Erico 171960 CADDY 24EM24 EM-M clamp galvanized
Chest tube clamp
closed, EPZ
Flange thickness: 3-8 mm
Type: 24EM24
Package: 10 PCS.
Sales unit: 50 pieces
Lieske Part No.: 658532
Made to order · Delivery time approx. 20 workdays
info_outline
416,10 EURGraduated prices From pieces Price per pieces X 4 412,98 EUR 8 409,86 EUR 12 406,74 EUR 16 403,62 EUR
Erico 171970 CADDY 24EM58 EM-M clamp P4 galvanized
Chest tube clamp closed, EPZ flange thickness: 8 -
4 mm Type: 24EM58 item: 5 ea.
Sales unit: 50 pieces
Lieske Part No.: 807221
Made to order · Delivery time approx. 20 workdays
info_outline
425,13 EURGraduated prices From pieces Price per pieces X 4 421,94 EUR 8 418,75 EUR 12 415,56 EUR 16 412,38 EUR
Erico 171980 CADDY 6M58SM cable and pipe clamp
Zur Befestigung von Kabelschutzrohren/Rohren oder Kabeln von Trägerflanschen. Die Schelle kann um vollständige 360° gedreht werden. Erfordert nur einen Hammer zur Installation.
Sales unit: 100 pieces
Lieske Part No.: 997778
Made to order · Delivery time approx. 20 workdays
info_outline
554,40 EURGraduated prices From pieces Price per pieces X 3 550,24 EUR 6 546,08 EUR 9 541,93 EUR 12 537,77 EUR
Erico 172060 CADDY EM58SM Clamp Zinc 8-14 mm
CADDY EM-SM clamp
with screw M6 x 11
ERICO zinc coating
Also available in stainless steel
Flange thickness: 8-14 mm
Maximum load: 45 kg Type: EM58SM
Quantity: 1 unit.
Lieske Part No.: 243223
Delivery time from supplier's stock (ca.) 3 workdays
info_outline
4,33 EURGraduated prices From pieces Price per pieces X 50 4,27 EUR 100 4,20 EUR 250 4,14 EUR 500 4,07 EUR
Erico 172150 CADDY 8P24 EM-P clamp
Requires only a hammer for installation. Available for EMT, rigid, IMT and aluminum conduit. Rotates 360°.
Sales unit: 100 pieces
Lieske Part No.: 541967
Made to order · Delivery time approx. 20 workdays
info_outline
525,09 EURGraduated prices From pieces Price per pieces X 3 521,15 EUR 6 517,21 EUR 9 513,28 EUR 12 509,34 EUR
Erico 172160 CADDY 8P58 EM-P clamp 8-14 mm
Spring steel fastener with push-in system that supports the conduit below or above the flange. 1/2¿ EMT or 18 to 22 mm conduit to 5/16¿-1/2¿ or 8 to 14 mm flange, mounting on the lower flange.
Sales unit: 100 pieces
Lieske Part No.: 675291
Made to order · Delivery time approx. 20 workdays
info_outline
527,96 EURGraduated prices From pieces Price per pieces X 3 524,00 EUR 6 520,04 EUR 9 516,08 EUR 12 512,12 EUR
Erico 172170 CADDY EM24SP25 EM clamp 25 pack
Can be used to attach junction boxes, fasteners or other applications to beam flanges. Multiple attachment points available to reduce inventory. Only requires a hammer for installation.
Sales unit: 25 pieces
Lieske Part No.: 247236
Delivery time from supplier's stock (ca.) 2 workdays
info_outline
71,46 EURGraduated prices From pieces Price per pieces X 6 70,92 EUR 12 70,39 EUR 24 69,85 EUR 36 69,32 EUR
Erico 172180 CADDY EM58SP25 EM clamp 25 pack
Can be used to attach junction boxes, fasteners or other applications to beam flanges. Multiple attachment points available to reduce inventory. Only requires a hammer for installation.
Sales unit: 250 pieces
Lieske Part No.: 318148
Made to order · Delivery time approx. 20 workdays
info_outline
788,50 EURGraduated prices From pieces Price per pieces X 3 782,59 EUR 6 776,67 EUR 9 770,76 EUR 12 764,85 EUR
Erico 172220 EM24SM16SP10 clamp 10x10 mm 10 pack
Can be used to attach junction boxes, fasteners or other applications to beam flanges. Captive set screw minimizes the need for additional components. Multiple attachment points available to reduce inventory. Only requires a hammer for installation.
Sales unit: 100 pieces
Lieske Part No.: 103302
Made to order · Delivery time approx. 20 workdays
info_outline
520,60 EURGraduated prices From pieces Price per pieces X 3 516,70 EUR 6 512,79 EUR 9 508,89 EUR 12 504,98 EUR
Erico 172230 EM58SM16SP10 clamp zinc-plated 10x10 mm
Can be used to attach junction boxes, fasteners or other applications to beam flanges. Captive set screw minimizes the need for additional components. Multiple attachment points available to reduce inventory. Only requires a hammer for installation.
Lieske Part No.: 359384
Delivery time from supplier's stock (ca.) 2 workdays
info_outline
5,30 EURGraduated prices From pieces Price per pieces X 25 5,26 EUR 50 5,22 EUR 100 5,18 EUR 250 5,14 EUR
Erico 172280 Clamp white 4G24H-625P zinc 10x25 mm
For attaching nVent CADDY Speed Link assemblies, wire, S-hook or chain from ceiling grid profiles. Fast, easy and secure twist-on installation. To reduce scratches on ceiling grid profiles. No tools required for installation.
Sales unit: 25 pieces
Lieske Part No.: 845099
65,18 EUR
Erico 172290 clamp white 4G24M16WHSP25 25 pack
For suspending installations from grid ceiling profiles. No tools required for installation. Fast, easy and safe twist installation. To reduce scratches on grid ceiling profiles. Nut sold separately.
Sales unit: 250 pieces
Lieske Part No.: 306864
Made to order · Delivery time approx. 20 workdays
info_outline
1.225,50 EUR
Erico 172320 H-Clip 4H24 zinc-coated 25 pack
Hammer-on fastener for attaching various chain or wire applications to steel support members. Attaches to 3-8mm flanges, with 7.1mm hole for attachment point. Small pack.
Lieske Part No.: 397621
Delivery time from supplier's stock (ca.) 2 workdays
info_outline
2,10 EURGraduated prices From pieces Price per pieces X 50 1,88 EUR 100 1,66 EUR 250 1,44 EUR 500 1,22 EUR
Erico 172350 H-Clip 4H58 galvanized
Drop-in fastener for attaching various chain or wire applications to steel support members. Attaches to 8-14mm flanges, with 7.1mm hole for attachment point. Small pack.
Lieske Part No.: 989246
Delivery time from supplier's stock (ca.) 2 workdays
info_outline
2,28 EURGraduated prices From pieces Price per pieces X 50 2,26 EUR 100 2,25 EUR 250 2,23 EUR 500 2,21 EUR
Erico 172370 CADDY 4H58ST3SP25 flange clip
Attaches cables to the top of the flange. Only requires a hammer to install.
Sales unit: 250 pieces
Lieske Part No.: 1316767
Made to order · Delivery time approx. 20 workdays
info_outline
1.240,01 EURGraduated prices From pieces Price per pieces X 2 1.230,71 EUR 4 1.221,41 EUR 6 1.212,11 EUR 8 1.202,81 EUR
Erico 172380 H-clip 4H912SP25 zinc-coated
Provides attachment for wire, nVent CADDY Speed Link or other assemblies to flanges and extrusions. Fits most beams. Installs easily with a hammer.
Sales unit: 250 pieces
Lieske Part No.: 493845
Made to order · Delivery time approx. 20 workdays
info_outline
615,15 EURGraduated prices From pieces Price per pieces X 3 610,54 EUR 6 605,92 EUR 9 601,31 EUR 12 596,70 EUR
Erico 172420 S-hook CADDY S40EGSP25 D=4
For hanging chains, perforated tape or the like.
Sales unit: 250 pieces
Lieske Part No.: 1311234
Made to order · Delivery time approx. 20 workdays
info_outline
164,82 EURGraduated prices From pieces Price per pieces X 5 163,58 EUR 10 162,35 EUR 15 161,11 EUR 20 159,88 EUR
Erico 172430 CADDY EBCSP25 clamp 25 pack
Easy installation on beam flanges. A 10.5 mm diameter through hole allows the use of M6, M8 or M10 threaded rod and carries static loads up to 450 N. Features three M6 threaded holes for attaching junction boxes to the side or underneath steel beams.
Sales unit: 250 pieces
Lieske Part No.: 703775
Made to order · Delivery time approx. 20 workdays
info_outline
1.094,88 EURGraduated prices From pieces Price per pieces X 2 1.086,67 EUR 4 1.078,46 EUR 6 1.070,25 EUR 8 1.062,03 EUR
Erico 172590 CADDY EBC16M screw pipe clip 0–16 mm
Beam clamp for installation on steel beams. Pipes can be easily inserted and locked into place without tools using the snap lock. 23.4-35mm OD, 16mm max. flange.
Sales unit: 100 pieces
Lieske Part No.: 928928
Made to order · Delivery time approx. 20 workdays
info_outline
837,33 EURGraduated prices From pieces Price per pieces X 3 831,05 EUR 6 824,77 EUR 9 818,49 EUR 12 812,21 EUR
Erico 172600 CADDY EBC20M screw pipe clip 0–16 mm
Easy installation on support flanges. Eliminates the need for compensating bends in the cable duct. Cable duct clamp rotates 360°.
Sales unit: 50 pieces
Lieske Part No.: 777523
Made to order · Delivery time approx. 20 workdays
info_outline
434,03 EURGraduated prices From pieces Price per pieces X 4 430,77 EUR 8 427,52 EUR 12 424,26 EUR 16 421,01 EUR
Erico 172610 CADDY EBC24M cable clamp 42-50 mm
Easy installation on support flanges. Eliminates the need for compensating bends in the cable duct. Cable duct clamp rotates 360°.
Sales unit: 50 pieces
Lieske Part No.: 1427572
Made to order · Delivery time approx. 20 workdays
info_outline
463,47 EURGraduated prices From pieces Price per pieces X 4 459,99 EUR 8 456,52 EUR 12 453,04 EUR 16 449,57 EUR
Erico 172620 Caddy EBC32M carrier clamp with strap
Easy installation on support flanges. Eliminates the need for compensating bends in the cable duct. Cable duct clamp rotates 360°.
Sales unit: 50 pieces
Lieske Part No.: 2068141
Made to order · Delivery time approx. 20 workdays
info_outline
495,49 EURGraduated prices From pieces Price per pieces X 4 491,77 EUR 8 488,06 EUR 12 484,34 EUR 16 480,63 EUR
Erico 172650 CADDY EBC6MSM screw pipe clip 14-18 mm
Easy installation on support flanges. Eliminates the need for compensating bends in the cable duct. Cable duct clamp rotates 360°.
Sales unit: 100 pieces
Lieske Part No.: 291984
Made to order · Delivery time approx. 20 workdays
info_outline
683,72 EURGraduated prices From pieces Price per pieces X 3 678,59 EUR 6 673,46 EUR 9 668,34 EUR 12 663,21 EUR
Erico 172660 CADDY EBC16MSM screw pipe clip 0–16 mm
Beam clamp for installation on steel beams. Pipes can be easily inserted and locked into place without tools using the snap lock. 23.4-35mm OD, 16mm Max. FL.
Sales unit: 100 pieces
Lieske Part No.: 702030
Made to order · Delivery time approx. 20 workdays
info_outline
775,89 EURGraduated prices From pieces Price per pieces X 3 770,07 EUR 6 764,25 EUR 9 758,43 EUR 12 752,61 EUR
Erico 172670 CADDY EBC20MSM cable clamp 35-42 mm
Easy installation on support flanges. Eliminates the need for compensating bends in the cable duct. Cable duct clamp rotates 360°.
Sales unit: 50 pieces
Lieske Part No.: 1427566
Made to order · Delivery time approx. 20 workdays
info_outline
449,39 EURGraduated prices From pieces Price per pieces X 4 446,02 EUR 8 442,65 EUR 12 439,28 EUR 16 435,91 EUR
Erico 172680 CADDY EBC24MSM cable clamp 42-50 mm
Easy installation on support flanges. Eliminates the need for compensating bends in the cable duct. Cable duct clamp rotates 360°.
Sales unit: 50 pieces
Lieske Part No.: 1427567
Made to order · Delivery time approx. 20 workdays
info_outline
457,07 EURGraduated prices From pieces Price per pieces X 4 453,64 EUR 8 450,21 EUR 12 446,79 EUR 16 443,36 EUR
