Fasteners in Fixing hardware
Fasteners from Erico
|
Erico 172380 H-bracket 4H912 P7 (P21) zinc-coated 10x25 mm
Provides attachment for wire, nVent CADDY Speed Link or other assemblies to flanges and extrusions. Fits most beams. Installs easily with a hammer.Lieske Part No.: 493845 Mfg Part No: 172380 Type: CADDY 4H912SP25 |
615,15 EUR 641,05 EUR
![]() ≈ £514.27 | ≈ $676.05
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Erico 172420 S-hook CADDY S40EGSP25 D=4
For hanging chains, perforated tape or the like.Lieske Part No.: 1311234 Mfg Part No: 172420 Type: CADDY S40EGSP25 |
164,82 EUR 171,77 EUR
![]() ≈ £137.79 | ≈ $181.14
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Erico 172430 Clip EBC P7 (P21) zinc for 10x25 mm, pack of 25
Easy installation on beam flanges. A 10.5 mm diameter through hole allows the use of M6, M8 or M10 threaded rod and carries static loads up to 450 N. Features three M6 threaded holes for attaching ...Lieske Part No.: 703775 Mfg Part No: 172430 Type: CADDY EBCSP25 |
1.094,88 EUR 1.140,98 EUR
![]() ≈ £915.32 | ≈ $1,203.27
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Erico 172590 CADDY screw pipe clip EBC16M screw strength 0–16 mm pipe diameter 30–35 mm
Beam clamp for installation on steel beams. Pipes can be easily inserted and locked into place without tools using the snap lock. 23.4-35mm OD, 16mm max. flange.Lieske Part No.: 928928 Mfg Part No: 172590 Type: CADDY EBC16M |
837,33 EUR 872,59 EUR
![]() ≈ £700.01 | ≈ $920.23
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Erico 172600 CADDY screw pipe clip EBC20M screw strength 0–16 mm
Easy installation on support flanges. Eliminates the need for compensating bends in the cable duct. Cable duct clamp rotates 360°.Lieske Part No.: 777523 Mfg Part No: 172600 Type: CADDY EBC20M |
434,03 EUR 452,31 EUR
![]() ≈ £362.85 | ≈ $477.00
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Erico 172610 Cable/pipe fastening CADDY EBC24M 42-50 mm cable/flange V
Easy installation on support flanges. Eliminates the need for compensating bends in the cable duct. Cable duct clamp rotates 360°.Lieske Part No.: 1427572 Mfg Part No: 172610 Type: CADDY EBC24M |
463,47 EUR 482,98 EUR
![]() ≈ £387.46 | ≈ $509.35
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Erico 172620 Caddy EBC32M BC-M carrier clamp with strap for cable protection conduit
Easy installation on support flanges. Eliminates the need for compensating bends in the cable duct. Cable duct clamp rotates 360°.Lieske Part No.: 2068141 Mfg Part No: 172620 Type: Caddy EBC32M |
495,49 EUR 516,35 EUR
![]() ≈ £414.23 | ≈ $544.54
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Erico 172650 CADDY screw pipe clip EBC6MSM screw strength 0–16 mm pipe diameter 14–18 mm
Easy installation on support flanges. Eliminates the need for compensating bends in the cable duct. Cable duct clamp rotates 360°.Lieske Part No.: 291984 Mfg Part No: 172650 Type: CADDY EBC6MSM |
683,72 EUR 712,51 EUR
![]() ≈ £571.59 | ≈ $751.41
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Erico 172660 CADDY screw pipe clip EBC16MSM screw strength 0–16 mm
Beam clamp for installation on steel beams. Pipes can be easily inserted and locked into place without tools using the snap lock. 23.4-35mm OD, 16mm Max. FL.Lieske Part No.: 702030 Mfg Part No: 172660 Type: CADDY EBC16MSM |
775,89 EUR 808,56 EUR
![]() ≈ £648.64 | ≈ $852.70
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Erico 172670 Cable/pipe fastening CADDY EBC20MSM 35-42 mm cable/flange H
Easy installation on support flanges. Eliminates the need for compensating bends in the cable duct. Cable duct clamp rotates 360°.Lieske Part No.: 1427566 Mfg Part No: 172670 Type: CADDY EBC20MSM |
449,39 EUR 468,31 EUR
![]() ≈ £375.69 | ≈ $493.88
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Erico 172680 Cable/pipe fastening CADDY EBC24MSM 42-50 mm cable/flange H
Easy installation on support flanges. Eliminates the need for compensating bends in the cable duct. Cable duct clamp rotates 360°.Lieske Part No.: 1427567 Mfg Part No: 172680 Type: CADDY EBC24MSM |
457,07 EUR 476,31 EUR
![]() ≈ £382.11 | ≈ $502.32
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Erico 172690 Cable/pipe fastening CADDY EBC32MSM 50-60 mm cable/flange H
Easy installation on support flanges. Eliminates the need for compensating bends in the cable duct. Cable duct clamp rotates 360°.Lieske Part No.: 1427568 Mfg Part No: 172690 Type: CADDY EBC32MSM |
503,17 EUR 524,35 EUR
![]() ≈ £420.65 | ≈ $552.98
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Erico 172921 Metal ring D=50 mm PTBM6 galvanized
Combine open eyebolts with other nVent CADDY fasteners to support cables through flanges, purlins, louvres, T-grids, etc.Lieske Part No.: 985540 Mfg Part No: 172921 Type: CADDY PTB6 |
316,35 EUR 329,67 EUR
![]() ≈ £264.47 | ≈ $347.67
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Erico 172922 Metal ring M8 PTBM8
Combine open eyebolts with other nVent CADDY fasteners to support cables through flanges, purlins, louvres, T-grids, etc.Lieske Part No.: 671613 Mfg Part No: 172922 Type: CADDY PTB8 |
400,20 EUR 417,05 EUR
![]() ≈ £334.57 | ≈ $439.82
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Erico 172950 CADDY 4Z34CTS cable duct support elements on threaded rods CADDY 4Z34CTS
For attaching cable trays up to 100 mm wide to threaded rods.Lieske Part No.: 1427570 Mfg Part No: 172950 Type: CADDY 4Z34CTS |
321,15 EUR 334,67 EUR
![]() ≈ £268.48 | ≈ $352.94
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Erico 173120 CADDY EERTIM6 EER-Ti/T trapezoidal ceiling threaded rod hanger
Threaded rod support. Threaded insert for easy installation.Lieske Part No.: 1262621 Mfg Part No: 173120 Type: CADDY EERTIM6 |
418,94 EUR 436,58 EUR
![]() ≈ £350.23 | ≈ $460.42
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Erico 173140 CADDY EERTIM10 EER-Ti/T trapezoidal ceiling threaded rod hanger
Trapezoidal ceiling suspension clip with threaded insert. M10 thread.Lieske Part No.: 1317455 Mfg Part No: 173140 Type: CADDY EERTIM10 |
418,94 EUR 436,58 EUR
![]() ≈ £350.23 | ≈ $460.42
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Erico 173420 H-ST clamp 2H4ST3 17342 0 P4 galvanized for 2–3 mm
CADDY H-ST-clamp ERICO zinc coating flange thickness: 2-3 mm Max load: 75 kg Type: 2H4ST3 item: ST. Lieske Part No.: 523312 Mfg Part No: 173420 Type: CADDY 2H4ST3 |
424,65 EUR 442,53 EUR
![]() ≈ £355.01 | ≈ $466.69
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Erico 173570 EM-M clamp 16EM912 P4 zinc 14-20 mm for pipes 30-35 mm
Chest tube clamplockable, EPZ Flange thickness: 14-20 mm Type: 16EM912 Item: 50 ST. Lieske Part No.: 437946 Mfg Part No: 173570 Type: CADDY 16EM912 |
353,88 EUR 368,78 EUR
![]() ≈ £295.84 | ≈ $388.91
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Erico 173580 EM-M clamp P4 20EM912 galvanized 14-20 mm and pipe 35-42 mm
Chest tube clamp closed, EPZ Flange: 4-2 mm Type: 2 EM9 2 Quantity: 5 PCS. Lieske Part No.: 541285 Mfg Part No: 173580 Type: CADDY 20EM912 |
408,50 EUR 425,70 EUR
![]() ≈ £341.51 | ≈ $448.94
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Erico 173590 CADDY-KKastenrohrklemme 24EM912P7 pipes 42-50 mm flange thickness 14-20 mm
For securing conduits/pipes or cables from support flanges. The clamp can be rotated a full 360°. Only requires a hammer for installation.Lieske Part No.: 883894 Mfg Part No: 173590 Type: CADDY 24EM912 |
455,94 EUR 475,14 EUR
![]() ≈ £381.17 | ≈ $501.08
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Erico 173600 CADDY conduit clamp 32EM24 flange thickness 3-8 mm conduit diameter 50-60 mm
For securing conduits/pipes or cables from support flanges. The clamp can be rotated a full 360°. Only requires a hammer for installation.Lieske Part No.: 818868 Mfg Part No: 173600 Type: CADDY 32EM24 |
456,38 EUR 475,60 EUR
![]() ≈ £381.53 | ≈ $501.56
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Erico 173610 EM-M clamp 32EM58 P4 zinc coating for 8-14 mm and pipe 50-60
For securing conduits/pipes or cables from support flanges. The clamp can be rotated a full 360°. Only requires a hammer for installation.Lieske Part No.: 112276 Mfg Part No: 173610 Type: CADDY 32EM58 |
481,17 EUR 501,44 EUR
![]() ≈ £402.26 | ≈ $528.81
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
Erico 173620 CADDY conduit clamp 32EM912 flange thickness 14-20 mm
For securing conduits/pipes or cables from support flanges. The clamp can be rotated a full 360°. Only requires a hammer for installation.Lieske Part No.: 539228 Mfg Part No: 173620 Type: CADDY 32EM912 |
503,19 EUR 524,37 EUR
![]() ≈ £420.67 | ≈ $553.01
Made to order · Delivery time approx. 20 workdaysinfo_outline
|


























