For fastening a single cable. For fastening to support flanges, angle irons, joists and other building elements.
Sales unit: 50 pieces
Lieske Part No.: 933723

For fastening a single cable protection pipe. For fastening to support flanges, angle irons, joists and other building elements.
Sales unit: 100 pieces
Lieske Part No.: 418548

For fastening a single cable protection pipe. For fastening to support flanges, angle irons, joists and other building elements.
Lieske Part No.: 2068184

One-piece cable/conduit clamp with protective shield. No screws or bolts to lose. Only requires a screwdriver or socket wrench to install. Fits into the open side of the strut mounting rail.
Lieske Part No.: 2068183

One-piece cable/conduit clamp with protective shield. No screws or bolts to lose. Only requires a screwdriver or socket wrench to install. Fits into the open side of the strut mounting rail.
Sales unit: 100 pieces
Lieske Part No.: 1427624

One-piece cable/conduit clamp with protective shield. No screws or bolts to lose. Only requires a screwdriver or socket wrench to install. Fits into the open side of the strut mounting rail.
Sales unit: 100 pieces
Lieske Part No.: 151946

One-piece cable/conduit clamp with protective shield. No screws or bolts to lose. Only requires a screwdriver or socket wrench to install. Fits into the open side of the strut mounting rail.
Sales unit: 50 pieces
Lieske Part No.: 559514

Fastening the junction box to the carrier.
Sales unit: 100 pieces
Lieske Part No.: 735532

Brackets for hanging and supporting signs. Sign support element for round mast, one M8 hole, with thread.
Sales unit: 50 pieces
Lieske Part No.: 545922

Straight post design, should be used when mounting on a false surface. Fastening for Fixoband. Stainless steel washers and screws included.
Sales unit: 50 pieces
Lieske Part No.: 916555

The specially flanged shape of the fastening element ensures a secure hold. Fastening for Fixoband. Rust-proof washers and screws included.
Sales unit: 50 pieces
Lieske Part No.: 195824

Straight post design, should be used when mounting on a false surface. Fastening for Fixoband. Stainless steel washers and screws included.
Sales unit: 50 pieces
Lieske Part No.: 1317012

Fastening for Fixoband.
Sales unit: 50 pieces
Lieske Part No.: 517655

Fastening for Fixoband.
Sales unit: 50 pieces
Lieske Part No.: 1317011

Two feet with pre-installed rail nuts and screw set for building an H-frame. This ensures better load distribution. Foam base for better protection of the roof membrane. For standard strut mounting rail profiles.
Lieske Part No.: 1261874

Single base with pre-installed rail nut to support custom framing on roofs. Provides excellent load distribution. Foam bottom for better protection of roof membrane. Accepts standard strut mounting rail profiles.
Lieske Part No.: 2068288

The kit includes six screws, six rail nuts and two L-brackets for assembling project-specific multi-part H-frame structures.
Lieske Part No.: 1264095

4-leg suspension kit, includes hardware and frame needed for a 48.5¿ (1200 mm) suspension system. Can be assembled by one person in minutes and adjusted to size and height. Integrated foam padding.
Lieske Part No.: 2068330

Ideal zur Verwendung mit Montageschienen des Typs 41x41 und Quadratrohren zur Anfertigung projektspezifischer Gerätehalterungen. Ausführung mit Langlöchern für eine schnelle und einfache Installation. Verkaufseinheit: 20 ST.
Sales unit: 20 pieces
Lieske Part No.: 514197

Installation with push-in clamps requires no additional tools or pipe clamps. Ready to use out of the box, saving installation time and labor. Plastic clamps and base are non-corrosive to pipes. Push-in clamps are available in 2 sizes to suit the project. The base has a variety of holes to accommodate different clamp sizes and configurations. Additional push-in clamps can be purchased separately to attach additional pipe runs. Foamed pad provides a low abrasion surface for better protection of the roof covering. Provides superior load distribution, even on uneven roof surfaces. Compatible with roof surfaces including single ply, bituminous materials, metal and spray foam. Available in multiple sizes and with different load capacities, the system can be customized to suit the application. Easy to transport to the roof.
Lieske Part No.: 1343704

Installation with push-in clamps requires no additional tools or pipe clamps. Ready to use out of the box, saving installation time and labor. Plastic clamps and base are non-corrosive to pipes. Push-in clamps are available in 2 sizes to suit the project. The base has a variety of holes to accommodate different clamp sizes and configurations. Additional push-in clamps can be purchased separately to attach additional pipe runs. Foamed pad provides a low abrasion surface for better protection of the roof covering. Provides superior load distribution, even on uneven roof surfaces. Compatible with roof surfaces including single ply, bituminous materials, metal and spray foam. Available in multiple sizes and with different load capacities, the system can be customized to suit the application. Easy to transport to the roof.
Sales unit: 10 pieces
Lieske Part No.: 1342344

Installation with push-in clamps requires no additional tools or pipe clamps. Ready to use out of the box, saving installation time and labor. Plastic clamps and base are non-corrosive to pipes. Push-in clamps are available in 2 sizes to suit the project. The base has a variety of holes to accommodate different clamp sizes and configurations. Additional push-in clamps can be purchased separately to attach additional pipe runs. Foamed pad provides a low abrasion surface for better protection of the roof covering. Provides superior load distribution, even on uneven roof surfaces. Compatible with roof surfaces including single ply, bituminous materials, metal and spray foam. Available in multiple sizes and with different load capacities, the system can be customized to suit the application. Easy to transport to the roof.
Sales unit: 5 pieces
Lieske Part No.: 1264418

Pedestal that uses a strut mounting rail to provide a fixed height mounting platform off the roof surface. Hot dip galvanized C-section strut mounting rail, 152mm long, 122mm high and hardware.
Sales unit: 20 pieces
Lieske Part No.: 1329280

Pedestal that provides a fixed height mounting platform on the roof surface with a strut mounting rail. Hot dip galvanized C-profile strut mounting rail, 254 mm long, 122 mm high.
Sales unit: 10 pieces
Lieske Part No.: 1329279

Pedestal that uses a strut mounting rail to provide a fixed height mounting platform away from the roof surface. Hot dip galvanized C-profile strut mounting rail, 254mm long, 163mm high.
Sales unit: 5 pieces
Lieske Part No.: 1329278

Pedestal that uses a strut mounting rail to provide a fixed height mounting platform away from the roof surface. Hot dip galvanized C-profile strut mounting rail, 406mm long, 122mm high.
Sales unit: 5 pieces
Lieske Part No.: 1329277

Provides superior load-bearing capacity for pipes, conduits, ducts, cable trays and equipment. Foamed overlay provides a low abrasion surface for better protection of roof covering. Compatible with roof surfaces including single ply, bituminous materials, metal and spray foam. Provides superior load distribution, even on uneven roof surfaces. Ready to use out of the box, saving installation time and labor. Available in multiple sizes and load capacities, the system can be customized to suit the application. Easy to transport to the roof. Hot-dip galvanized and UV stabilized for long life.
Sales unit: 5 pieces
Lieske Part No.: 1261730

Base with strut mounting rail profile that allows height changes away from the roof surface. Ready-to-use, immediately deployable solution with hot-dip galvanized strut mounting rail profile and hardware. 254 mm long, height adjustable 152-330 mm.
Sales unit: 5 pieces
Lieske Part No.: 1337337

Standfuß mit Strutmontageschienenprofil, die Höhenänderungen abseits der Dachfläche ermöglicht. Gebrauchsfertige, sofort einsatzber. Lösung mit feuerverz. Strutmontageschienenprofil u. Hardware. 406mm lang, höhenverstellbar 178-457mm. Verkaufseinheit: 1 ST.
Lieske Part No.: 514201

Extra wide base that uses a strut mounting rail to provide a fixed height mounting platform away from the roof surface. Hot dip galvanized A-profile strut mounting rail, 610mm long, 142mm high.
Sales unit: 2 pieces
Lieske Part No.: 2068331

Ideal zur Befestigung von mehrere Rohren, Kabelrinnen und Lüftungsgeräten. Die geschäumte Auflage bietet eine geringe Abriebfläche für besseren Schutz der Dachhaut. Kompatibel mit Dachflächen, einschließlich Einzellagen, bituminösen Materialien, Metall und Spritzschaum. Bietet überlegene Lastverteilung, selbst bei unebenen Dachoberflächen. Gebrauchsfertig aus dem Karton, spart Installationszeit und Arbeit. Das in mehreren Größen und mit unterschiedlicher Tragfähigkeit erhältliche System lässt sich anwendungsspezifisch anpassen. Feuerverzinkt und UV-stabilisiert für eine lange Lebensdauer. Verkaufseinheit: 1 ST.
Lieske Part No.: 514202

Installation with push-in clamps is done without additional tools or pipe clamps. The push-in clamps are available in 2 sizes to suit the project. Plastic clamps and base do not have a corrosive effect on the pipes.
Sales unit: 100 pieces
Lieske Part No.: 1342075

Installation with push-in clamps is done without additional tools or pipe clamps. The push-in clamps are available in 2 sizes to suit the project. Plastic clamps and base do not have a corrosive effect on the pipes.
Sales unit: 100 pieces
Lieske Part No.: 1343705

Self-locking stainless steel nuts allow for application-specific attachment to the support base, including easy attachment of stainless steel mounting rails, threaded rods or project-specific fasteners. Foamed overlay provides a low abrasion surface for better protection of the roof covering. Compatible with roof surfaces including single ply, bituminous materials, metal and spray foam. Provides superior load distribution, even on uneven roof surfaces. Available in multiple sizes and load capacities, the system can be customized to meet application requirements. Includes square mounting rail slots to create a 305mm wide H-frame (PBUM16 only). Base is UV stabilized thermoplastic material.
Sales unit: 20 pieces
Lieske Part No.: 1342077

Self-locking stainless steel nuts allow for application-specific attachment to the support base, including easy attachment of stainless steel mounting rails, threaded rods or project-specific fasteners. Foamed overlay provides a low abrasion surface for better protection of the roof covering. Compatible with roof surfaces including single ply, bituminous materials, metal and spray foam. Provides superior load distribution, even on uneven roof surfaces. Available in multiple sizes and load capacities, the system can be customized to meet application requirements. Includes square mounting rail slots to create a 305mm wide H-frame (PBUM16 only). Base is UV stabilized thermoplastic material.
Sales unit: 10 pieces
Lieske Part No.: 2068390

Self-locking stainless steel nuts allow for application-specific attachment to the support base, including easy attachment of stainless steel mounting rails, threaded rods or project-specific fasteners. Foamed overlay provides a low abrasion surface for better protection of the roof covering. Compatible with roof surfaces including single ply, bituminous materials, metal and spray foam. Provides superior load distribution, even on uneven roof surfaces. Available in multiple sizes and load capacities, the system can be customized to meet application requirements. Includes square mounting rail slots to create a 305mm wide H-frame (PBUM16 only). Base is UV stabilized thermoplastic material.
Sales unit: 5 pieces
Lieske Part No.: 2068391

The locking pins are installed without tools. Locking pins and bases do not corrode. Pins and mounting holes match almost all perforated cable trays. Ready to use out of the box, saves installation time and labor. Additional pins can be purchased separately. Foamed pad provides a low abrasion surface for better protection of the roof covering. Provides superior load distribution, even on uneven roof surfaces. Compatible with roof surfaces including single ply, bituminous materials, metal and spray foam. Available in several sizes and with different load capacities, the system can be customized to suit the application. Easy to transport to the roof.
Sales unit: 20 pieces
Lieske Part No.: 1264414

Tool-free, perforated cable tray support kit that provides a fixed height of 4¿ (102 mm) above the roof surface. 12 1/2¿ (317.5 mm) long, ready to use, includes insertion pins. LEED qualified.
Sales unit: 10 pieces
Lieske Part No.: 1264413

The locking pins are installed without tools. Locking pins and bases do not corrode. Pins and mounting holes fit almost all perforated cable trays.
Sales unit: 10 pieces
Lieske Part No.: 1264412

The locking pins are installed without tools. Locking pins and bases do not corrode. Pins and mounting holes match almost all perforated cable trays. Ready to use out of the box, saves installation time and labor. Additional pins can be purchased separately. Foamed pad provides a low abrasion surface for better protection of the roof covering. Provides superior load distribution, even on uneven roof surfaces. Compatible with roof surfaces including single ply, bituminous materials, metal and spray foam. Available in several sizes and with different load capacities, the system can be customized to suit the application. Easy to transport to the roof.
Lieske Part No.: 1264411

The pre-assembled suspension solution includes a telescopic mounting rail, two steel cables with hooks and two CADDY SPEED LINK fasteners. Can be extended to the required length and secured with a spring clip. The telescopic mounting rail with strut profile over the entire length allows the use of standard strut fasteners anywhere between the cable hangers. Supports up to seven 2' (DN 50) metal cable conduits, six 2' (DN 50) water-filled pipes at a fastening distance of 3 m, or 450 mm wide cable tray. Any pipes can be attached directly to the rail with no gap, saving space in buildings when installation space is limited. To attach to a building or an object, simply loop the cable around and hook the cable. Can be combined with many nVent CADDY fasteners. Hand tightened, the fastener is held securely in place, without any tools. Can be easily w
Lieske Part No.: 2068523

CADDY CN connecting link
Diameter in mm: 3.0 mm Type: KN30


Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 229684

CADDY CN connecting link
diameter in mm: 4.0 mm Type: KN40


Item: 100 ST.
Lieske Part No.: 639053

CADDY CN connecting link
Diameter in mm: 5.0 mm

Type: KN50
Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 122914

Mounting rail for the production of trapezes, structures and bracing, type A. 2 meters of back-perforated, pre-galvanized mounting rail, 41 x 41 x 2.5 mm.
Sales unit: 10 pieces
Lieske Part No.: 232807

CADDY TKN bracket for threaded rods M6, M8, M10, M12 diameters in mm: M6 Type: TKN / M6 Quantity: 140 ST.
Sales unit: 140 pieces
Lieske Part No.: 193560

CADDY TKN clamp for threaded rod M6, M8, M
, M
2 mm in diameter: M8 Type: TKNM8 P
Sales unit:
ST.
Lieske Part No.: 842259

CADDY TKN clip
for threaded rods M6, M8, M10, M12
Diameter in mm: M10

Type: TKN/M10
Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 134091

Mounting rail for the production of trapezes, structures and bracing, type C. 2 meters of back-perforated, pre-galvanized mounting rail, 21 x 41 x 2.5 mm.
Sales unit: 10 pieces
Lieske Part No.: 943961

For making metal frames with nVent CADDY Eristrut rails.
Sales unit: 10 pieces
Lieske Part No.: 441021