The system includes the steel cable with hook and the fastener. Can be combined with many nVent CADDY fasteners. To attach to the building or an object, the cable is simply looped around and the hook is attached to the cable. Can be easily removed again. The spring tab holds the cable securely in the hook. The hook can also be used as an end stop when the cable is fed through openings. Also available in Y-hook configuration.
Sales unit: 10 pieces
Lieske Part No.: 604594

The system includes the steel cable with hook and the fastener. Can be combined with many nVent CADDY fasteners. To attach to the building or an object, the cable is simply looped around and the hook is attached to the cable. Can be easily removed again. The spring tab holds the cable securely in the hook. The hook can also be used as an end stop when the cable is fed through openings. Also available in Y-hook configuration.
Sales unit: 5 pieces
Lieske Part No.: 591916

Das System beinhaltet das Stahlseil mit Schlaufe und den Verschluss. Einfache und flexible Befestigungslösung. Das Seil wird um den Träger geschlungen und einfach durch die Schlaufe gezogen. Ideal zur Befestigung an Pfetten, Trägern oder anderen Bauteilen. Passt in kleinste Zwischenräume. Lasten können auch direkt in die Schlaufe eingehängt werden z.B. Rohre. Verkaufseinheit: 10 ST.
Sales unit: 10 pieces
Lieske Part No.: 1356756

The system includes the steel cable, the lock and the pre-assembled angle connector. Ideal for fastening to concrete, steel, threaded rods or wooden surfaces. Simple alternative to chains and their accessories.
Sales unit: 10 pieces
Lieske Part No.: 1343692

The system includes the steel cable, the lock and the pre-assembled angle connector. Ideal for fastening to concrete, steel, threaded rods or wooden surfaces. Simple alternative to chains and their accessories.
Sales unit: 5 pieces
Lieske Part No.: 1343699

Easy to use keyless lock for wire rope suspension systems. Tool free, compatible with 3mm steel cable.
Sales unit: 200 pieces
Lieske Part No.: 1334634

The system includes the steel cable, fastener and bolt anchor from Powers Fasteners, Inc. Fastens quickly and easily in cracked and uncracked concrete. No special tools required.
Sales unit: 10 pieces
Lieske Part No.: 1343683

The system includes the steel cable, fastener and bolt anchor from Powers Fasteners, Inc. Fastens quickly and easily in cracked and uncracked concrete. No special tools required.
Sales unit: 10 pieces
Lieske Part No.: 2068372

The single cable entry closure allows for quick prefabrication of mounting rails. The slip-on nut connects the closure simply and securely to the mounting rail or fastener and simplifies installation. When hand-tightened, the closure is held securely in position without the need for tools. Can be installed in strut mounting rail profiles without having to insert fingers or tools into the strut mounting rail. The guide on the slip-on nut guides the cable safely into the closure mechanism and stabilizes the suspension. The mounting rail can be installed with the opening facing up or down.
Sales unit: 50 pieces
Lieske Part No.: 2068374

The single cable entry closure allows for quick prefabrication of mounting rails. The slip-on nut connects the closure simply and securely to the mounting rail or fastener and simplifies installation. When hand-tightened, the closure is held securely in position without the need for tools. Can be installed in strut mounting rail profiles without having to insert fingers or tools into the strut mounting rail. The guide on the slip-on nut guides the cable safely into the closure mechanism and stabilizes the suspension. The mounting rail can be installed with the opening facing up or down.
Lieske Part No.: 2068375

The system includes the steel cable with hook and the lock. Can be combined with many nVent CADDY fasteners. To attach to the building or an object, the cable is simply looped around and the hook is attached to the cable. Can be easily removed again. The spring tab holds the cable securely in the hook. The hook can also be used as an end stop when the cable is fed through openings. When hand-tightened, the lock is held securely in position, without the need for tools. Can be installed in strut mounting rail profiles without having to insert fingers or tools into the strut mounting rail.
Lieske Part No.: 2068376

The system includes the steel cable with hook and the lock. Can be combined with many nVent CADDY fasteners. To attach to the building or an object, the cable is simply looped around and the hook is attached to the cable. Can be easily removed again. The spring tab holds the cable securely in the hook. The hook can also be used as an end stop when the cable is fed through openings. When hand-tightened, the lock is held securely in position, without the need for tools. Can be installed in strut mounting rail profiles without having to insert fingers or tools into the strut mounting rail.
Lieske Part No.: 2068377

The system includes the steel cable with hook and the lock. Can be combined with many nVent CADDY fasteners. To attach to the building or an object, the cable is simply looped around and the hook is attached to the cable. Can be easily removed again. The spring tab holds the cable securely in the hook. The hook can also be used as an end stop when the cable is fed through openings. When hand-tightened, the lock is held securely in position, without the need for tools. Can be installed in strut mounting rail profiles without having to insert fingers or tools into the strut mounting rail.
Lieske Part No.: 2068379

The system includes the steel cable with hook and the lock. Can be combined with many nVent CADDY fasteners. To attach to the building or an object, the cable is simply looped around and the hook is attached to the cable. Can be easily removed again. The spring tab holds the cable securely in the hook. The hook can also be used as an end stop when the cable is fed through openings. When hand-tightened, the lock is held securely in position, without the need for tools. Can be installed in strut mounting rail profiles without having to insert fingers or tools into the strut mounting rail.
Lieske Part No.: 2068380

The system includes the steel cable, the fastener and the pre-assembled ceiling hook. Fast and easy attachment to trapezoidal ceilings. The spring tension allows the hook to snap securely into the hole and holds it there securely. The design reliably protects the cable from damage from sharp sheet metal edges. When tightened by hand, the fastener is held securely in position, without the need for tools. Can be installed in strut mounting rail profiles without having to insert fingers or tools into the strut mounting rail.
Sales unit: 10 pieces
Lieske Part No.: 1769434

The system includes the steel cable, the fastener and the pre-assembled ceiling hook. Fast and easy attachment to trapezoidal ceilings. The spring tension allows the hook to snap securely into the hole and holds it there securely. The design reliably protects the cable from damage from sharp sheet metal edges. When tightened by hand, the fastener is held securely in position, without the need for tools. Can be installed in strut mounting rail profiles without having to insert fingers or tools into the strut mounting rail.
Sales unit: 10 pieces
Lieske Part No.: 1769433

The locking mechanism, which can be operated without tools by pushing or pulling, allows for very simple adjustment. The small lock is almost invisible. The rope angle enclosed by the loop can be up to 90 degrees, which means the lock can be positioned very close to the load. The tubes of the locking mechanism can be operated easily and safely even when wearing gloves. The double-sided locking mechanisms allow for easy height adjustment.
Sales unit: 10 pieces
Lieske Part No.: 2068702

The assembly kit includes fused wire rope cuts that cannot fray, pre-assembled hook end pieces and a time-saving tool-free lock. The wire rope loops can be attached to the structure and hooked into place. The hook end pieces are easy to attach to the ring nut. The spring tab holds the rope securely in the hook.
Lieske Part No.: 2131245

Zum Montagesatz gehören verschmolzene Drahtseilzuschnitte, die nicht ausfransen können, vormontierte Hakenendstücke und ein zeitsparendes werkzeugloses Schloss.. Die Drahtseilschlaufen können am Bauwerk befestigt und eingehakt werden. Die Hakenendstücke sind leicht an der Ringmutter anzubringen. Die Federlasche hält das Seil sicher im Haken. Verkaufseinheit: 1 ST.
Lieske Part No.: 702228

Zum Montagesatz gehören verschmolzene Drahtseilzuschnitte, die nicht ausfransen können, vormontierte Hakenendstücke und ein zeitsparendes werkzeugloses Schloss.. Die Drahtseilschlaufen können am Bauwerk befestigt und eingehakt werden. Die Hakenendstücke sind leicht an der Ringmutter anzubringen. Die Federlasche hält das Seil sicher im Haken. Verkaufseinheit: 1 ST.
Lieske Part No.: 702230

The locking mechanism, which can be operated without tools by pushing or pulling, allows for very simple adjustment. The small lock is almost invisible. The 60° angle allows the device to be positioned close to the structure. The tubes of the locking mechanism can be operated easily and safely even when wearing gloves.
Lieske Part No.: 2131246

Used as a conductor or earthing in lightning protection systems. Lower impedance than similarly sized round conductors.
Lieske Part No.: 1320459

The complete system includes a steel cable, lock and mounting bracket with push bolt adapter. Attaches to the muzzle of gas or battery-powered bolt drivers and can be used without holding or with an extension rod. Mounting bracket with longer legs for tool clearance. Quick and easy to attach to concrete, steel and composite metal ceilings.
Lieske Part No.: 2068703

Fixed cable for a range of applications. Available in smaller spool sizes for better handling. LPA and LPC parts are used as lightning conductors in lightning protection systems or in earthing applications.
Lieske Part No.: 467403

Mounting rail for the manufacture of trapezes, structures and bracing, type CC. 3 meters of back-perforated, pre-galvanized mounting rails, welded on the back, 41 x 41 x 2.5 mm.
Sales unit: 5 pieces
Lieske Part No.: 785477

Cold formed rail, slotted hole. Welded back to back.
Sales unit: 5 pieces
Lieske Part No.: 251302

Cold formed rail, slotted hole. Welded back to back.
Sales unit: 5 pieces
Lieske Part No.: 179844

Cold-formed rail, slotted hole. Welded back-to-back. Mounting rails for heavy loads. For individual fastening or for efficient construction of pipe and cable routing.
Sales unit: 5 pieces
Lieske Part No.: 392063

Mounting rail for the production of trapezes, structures and bracing, type A. 6 meters of back-perforated, pre-galvanized mounting rails, welded on the back, 82 x 41 x 2.5 mm.
Sales unit: 5 pieces
Lieske Part No.: 328357

Cold-formed rail, slotted hole. Welded back-to-back. Mounting rails for heavy loads. For individual fastening or for efficient construction of pipe and cable routing.
Sales unit: 5 pieces
Lieske Part No.: 936867

Mounting rail for the production of trapezes, structures and bracing, type A. 6 meters of back-perforated, hot-dip galvanized mounting rails, welded on the back, 82 x 41 x 2.5 mm.
Sales unit: 5 pieces
Lieske Part No.: 107454

ERICO ERISTRUT System
Version: electro galvanized, hot-dip galvanized, stainless steel
profile DC
Dimensions: 21 x 41 x 2.5 mm
Lead Length: 3m Type: DC30-1


Quantity: 1 unit.
Sales unit: 10 pieces
Lieske Part No.: 228599

Mounting rail for the production of trapezes, structures and bracing, type C. 6 meters of back-perforated, pre-galvanized mounting rail, 21 x 41 x 2.5 mm.
Sales unit: 10 pieces
Lieske Part No.: 147716

Mounting rail for the production of trapezes, structures and bracing, type C. 2 meters of back-perforated, pre-galvanized mounting rail, 21 x 41 x 2 mm.
Sales unit: 10 pieces
Lieske Part No.: 1259969

Montageschiene zur Herstellung von Trapezen, Konstruktionen und Verstrebungen, Typ C. 3 Meter rückengelochte, vorverzinkte Montageschiene, 21 x 41 x 2mm. Verkaufseinheit: 1 ST.
Lieske Part No.: 502916

Mounting rail for the production of trapezes, structures and bracing, type C. 3 meters of back-perforated, hot-dip galvanized mounting rail, 21 x 41 x 2.5 mm.
Sales unit: 10 pieces
Lieske Part No.: 599242

Mounting rail for the production of trapezes, structures and bracing, type C. 6 meters of back-perforated, hot-dip galvanized mounting rail, 21 x 41 x 2.5 mm.
Sales unit: 10 pieces
Lieske Part No.: 995155

Mounting rail for the production of trapezes, structures and bracing, type A. 3 meters of back-perforated, pre-galvanized mounting rail, 41 x 41 x 2.5 mm.
Sales unit: 10 pieces
Lieske Part No.: 555111

Mounting rail for the production of trapezes, structures and bracing, type A. 3 meters of back-perforated, pre-galvanized mounting rail, 41 x 41 x 2 mm.
Sales unit: 10 pieces
Lieske Part No.: 1322220

Mounting rail for the production of trapezes, structures and bracing, type A. 6 meters of back-perforated, pre-galvanized mounting rail, 41 x 41 x 2.5 mm.
Sales unit: 10 pieces
Lieske Part No.: 456122

Mounting rail for making trapezes, structures and bracing, type A. 6 meters of back-punched, stainless steel 316 mounting rail, 41 x 41 x 2.5 mm.
Lieske Part No.: 634941

Mounting rail for the production of trapezes, structures and bracing, type A. 3 meters of back-perforated, hot-dip galvanized mounting rail, 41 x 41 x 2.5 mm.
Sales unit: 10 pieces
Lieske Part No.: 622066

Mounting rail for the production of trapezes, structures and bracing, type A. 6 meters of back-perforated, hot-dip galvanized mounting rail, 41 x 41 x 2.5 mm.
Sales unit: 10 pieces
Lieske Part No.: 308858

Cold formed rail, long hole. With side holes.
Sales unit: 10 pieces
Lieske Part No.: 149963

Montageschiene Typ E, mit Langloch, PG, 3.000 mm x 83 mm x 41 mm x 2,5 mm. Kalt geformte Schiene, Langloch Verkaufseinheit: 1 MTR
Lieske Part No.: 493572

Back-to-back welded rail. Welded to flat mounting plate.
Sales unit: 5 pieces
Lieske Part No.: 1317379

Back-to-back welded rail. Welded to flat mounting plate.
Sales unit: 5 pieces
Lieske Part No.: 1317378

Back-to-back welded rail. Welded to flat mounting plate.
Lieske Part No.: 1317377

Sales unit: 20 ST.
Sales unit: 20 pieces
Lieske Part No.: 2069724

Sales unit: 10 ST.
Sales unit: 10 pieces
Lieske Part No.: 2069725