Spring steel mount with push-in system that supports the conduit adjacent to the flange. 1¿ EMT or 30 to 35 mm conduit to 5/16¿-1/2¿ or 8 to 14 mm flange, side mount.
Sales unit: 100 pieces
Lieske Part No.: 860132

Requires only a hammer for installation. Available for EMT, rigid and aluminum conduit. Rotates 360°.
Sales unit: 50 pieces
Lieske Part No.: 404934

For attaching cable conduit to supports. Only requires a hammer for installation.
Sales unit: 100 pieces
Lieske Part No.: 295569

Spring steel fastening with push-in system that supports the cable conduit directly below or above the flange. 18 to 22 mm cable conduit on 8 to 14 mm flange, mounting on the lower flange.
Sales unit: 100 pieces
Lieske Part No.: 837393

For attaching cable conduit to supports. Only requires a hammer for installation.
Sales unit: 100 pieces
Lieske Part No.: 509697

Can be used to attach junction boxes, fasteners or other applications to beam flanges. Multiple attachment points available to reduce inventory. Only requires a hammer for installation.
Sales unit: 250 pieces
Lieske Part No.: 1427569

Pipe diameter 42-50 mm
Flange thickness: 3-8 mm

Type: 24M24SM
Package: 10 PCS.
Sales unit: 50 pieces
Lieske Part No.: 607606

For suspending installations from grid ceiling profiles. No tools required for installation. Fast, easy and safe twist installation. Wing nut included.
Sales unit: 100 pieces
Lieske Part No.: 1311233

CADDY 4G
6M clip ERICO zinc coating, painted white. Flange width 24-26 mm flange thickness
, 5 mm screw M 6 x 25 mm Type: 4G
6M25 sales unit:
ST.
Sales unit: 100 pieces
Lieske Part No.: 838789

For attaching cables to support flanges. Only requires a hammer for installation.
Sales unit: 100 pieces
Lieske Part No.: 1317406

Spring steel mount with cable tie base to secure cable parallel to support flange. Mounted on 3-8mm flange, cable tie not included.
Sales unit: 100 pieces
Lieske Part No.: 547348

Spring steel mount with cable tie base to secure cable parallel to support flange. Mounted on 8-12mm flange, cable tie not included.
Sales unit: 100 pieces
Lieske Part No.: 327370

Spring steel mount with cable tie base to secure cable parallel to support flange. Mounted on 12-20mm flange, cable tie not included.
Sales unit: 100 pieces
Lieske Part No.: 1427782

For attaching cables to support flanges. Only requires a hammer for installation.
Sales unit: 100 pieces
Lieske Part No.: 1263949

Quick and easy to install clip with retaining lips for a threaded pin attachment point in acoustic T-grid applications. For 24 mm T-grid with M6 x 7 mm threaded pin.
Sales unit: 100 pieces
Lieske Part No.: 405568

CADDY 4G
6M clip ERICO zinc coating, painted white. Flange width 24-26 mm flange thickness
, 5 mm screw M 6 x

mm Type: 4G
6M

Sales unit:
ST.
Lieske Part No.: 705763

For suspending installations from grid ceiling profiles. No tools required for installation. Fast, easy and safe twist installation. Nut sold separately.
Sales unit: 100 pieces
Lieske Part No.: 1311232

Fast, easy and safe twist installation. No special tools required. To reduce scratches on grid ceiling profiles.
Sales unit: 100 pieces
Lieske Part No.: 802976

CADDY H-brace
ERICO zinc coating (standard)
Also available in stainless steel.
Flange thickness: 3-8 mm
load limit: 900 N Type: 4H24-2


Package: 10 PCS.
Sales unit: 100 pieces
Lieske Part No.: 271687

CADDY H-brace
ERICO zinc coating (standard)
Also available in stainless steel.
Flange thickness: 8-14 mm
Load limit: 900 N

Type: 2-4H58
Package: 10 PCS.
Lieske Part No.: 355447

CADDY H-brace
ERICO zinc coating (standard)
Also available in stainless steel.
Flange thickness: 14-20 mm
Load limit: 900 N

Type: 2-4H912
Quantity: 1 unit.

Please order in increments of 100 Packs
Sales unit: 100 pieces
Lieske Part No.: 489607

For securing conduits/pipes or cables from support flanges. The clamp can be rotated a full 360°. Only requires a hammer for installation.
Sales unit: 100 pieces
Lieske Part No.: 597065

For securing conduits/pipes or cables from support flanges. The clamp can be rotated a full 360°. Only requires a hammer for installation.
Sales unit: 100 pieces
Lieske Part No.: 520789

For securing conduits/pipes or cables from support flanges. The clamp can be rotated a full 360°. Only requires a hammer for installation.
Sales unit: 100 pieces
Lieske Part No.: 575200

For securing conduits/pipes or cables from support flanges. The clamp can be rotated a full 360°. Only requires a hammer for installation.
Sales unit: 100 pieces
Lieske Part No.: 547508

Knock-on fastener for attaching device boxes, devices and other applications to support flanges. Stainless steel fastener, attaches to flanges from 3 to 8 mm, accepts M6 threaded rod.
Sales unit: 100 pieces
Lieske Part No.: 972872

Knock-on fastener for attaching device boxes, devices and other applications to support flanges. Stainless steel fastener, attaches to flanges from 8 to 14 mm, accepts M6 threaded rod.
Sales unit: 100 pieces
Lieske Part No.: 383519

CADDY EM-clamp connections ERICO two zinc coating available in stainless steel flange thickness:
4-2 mm Max load: 45 kg Type: EM9
2-2 item:
ST.
Sales unit: 100 pieces
Lieske Part No.: 999204

Fastening element for knocking on, for threaded pin fastening of device boxes, devices and other applications to support flanges. Stainless steel fastening, is attached to flanges from 3 to 8 mm, with M6 x 11 mm threaded pin.
Sales unit: 100 pieces
Lieske Part No.: 386744

Fastening element for knocking on, for threaded pin fastening of device boxes, devices and other applications to support flanges. Stainless steel fastening, is attached to flanges from 8 to 14 mm, with M6 x 11 mm threaded pin.
Sales unit: 100 pieces
Lieske Part No.: 946924

Fastening element for knocking on, for threaded pin fastening of device boxes, devices and other applications on support flanges. Stainless steel fastening, is attached to flanges from 14 to 20 mm, with M6 x 11 mm threaded pin.
Sales unit: 100 pieces
Lieske Part No.: 676229

For securing conduits/pipes or cables from support flanges. The clamp can be rotated a full 360°. Only requires a hammer for installation.
Sales unit: 50 pieces
Lieske Part No.: 262625

For securing conduits/pipes or cables from support flanges. The clamp can be rotated a full 360°. Only requires a hammer for installation.
Sales unit: 50 pieces
Lieske Part No.: 1316072

For securing conduits/pipes or cables from support flanges. The clamp can be rotated a full 360°. Only requires a hammer for installation.
Lieske Part No.: 109279

Provides attachment for nVent CADDY Speed Link assemblies, wire, S-hook or chain from roof purlin and steel joists. Installs from ground level using VAFT tool and conduit.
Sales unit: 100 pieces
Lieske Part No.: 164901

Effective way to attach steel cable and chain to a Z-purlin structural member. Attaches to 1/16-1/4¿ flange with 1/4¿ bore.
Sales unit: 100 pieces
Lieske Part No.: 370521

Trapezoidal ceiling suspension with hole and locking rod. 14 mm hole.
Lieske Part No.: 451689

CADDY-clip MTD
ERICO zinc coating
Model: M6
Screw M 8

Type: TDHM6
Item: 100 ST.
Lieske Part No.: 210907

ERICO CADDY clip MTD-zinc coating Design: M8 grub screw M 6 Type: TDHM8 item:
ST.
Lieske Part No.: 707909

CADDY-clip MTD
ERICO zinc coating
Model: M10
Screw M 10

Type: TDHM10
Quantity: 1 unit.
Sales unit: 50 pieces
Lieske Part No.: 493356

Non-continuous cable management solution with a wide base and smooth beveled edges. Provides optimal support for high-performance data cables, including CAT7 and fiber optic cables. 25 mm (1¿) diameter.
Sales unit: 50 pieces
Lieske Part No.: 1259765

Non-continuous cable management solution with a wide base and smooth bevelled edges. Provides optimal support for high performance data cables including CAT7 and fibre optic cables. 50mm (2?) diameter.
Sales unit: 50 pieces
Lieske Part No.: 912450

Non-continuous cable management solution with a wide base and smooth beveled edges. Provides optimal support for high-performance data cables, including CAT7 and fiber optic cables. 75 mm (3¿) diameter.
Sales unit: 25 pieces
Lieske Part No.: 1259764

Non-continuous cable management solution with a wide base and smooth bevelled edges. Provides optimal support for high-performance data cables, including CAT7 and fibre optic cables. 100 mm (4¿) diameter.
Sales unit: 25 pieces
Lieske Part No.: 1259763

Easily installs to beam flanges. Requires no screws, rivets or special tools for assembly. For increased rigidity and strength, J-hooks feature bendable locking tabs for connection to nVent CADDY Cat HP components. Connects to J-hooks in one of several color options to facilitate identification and organization of cable routing. Custom J-hook combinations can be easily assembled from various J-hook sizes, colors and configurations. nVent CADDY Cat HP components can be easily attached to any size nVent CADDY Cat HP J-hooks.
Sales unit: 50 pieces
Lieske Part No.: 1259729

Knock on or install from the ground using the VAFT tool. Requires no screws, rivets or special tools for assembly. For increased rigidity and stability, J-hooks feature bendable locking tabs for connection to nVent CADDY Cat HP components. Connects to J-hooks in one of several color options to facilitate identification and organization of cable routing. Custom J-hook combinations can be easily assembled from various J-hook sizes, colors and configurations. nVent CADDY Cat HP components can be easily attached to any size nVent CADDY Cat HP J-hooks.
Sales unit: 50 pieces
Lieske Part No.: 1259727

Quickly attaches to threaded or wire rod. Requires no screws, rivets or special tools for assembly. For increased rigidity and strength, J-hooks feature bendable locking tabs for connection to nVent CADDY Cat HP components. Connects to J-hooks in one of several color options to facilitate identification and organization of cable routing. Custom J-hook combinations can be easily assembled from various J-hook sizes, colors and configurations. nVent CADDY Cat HP components can be easily attached to any size nVent CADDY Cat HP J-hooks.
Sales unit: 50 pieces
Lieske Part No.: 1259602

Easily installs to raised floor bases. Requires no screws, rivets or special tools for assembly. For added rigidity and stability, J-hooks feature bendable locking tabs for connection to nVent CADDY Cat HP components. Connects to J-hooks in one of several color options to facilitate identification and organization of cable routing. Custom J-hook combinations can be easily assembled from various J-hook sizes, colors and configurations. nVent CADDY Cat HP components can be easily attached to any size nVent CADDY Cat HP J-hooks.
Sales unit: 25 pieces
Lieske Part No.: 1259599

Base clip requires no installation tools. Provides optimal support for high performance data cables up to and including Cat 5e, Cat 6, Cat 6A, Cat 7 and fiber optic. Offers superior fill capacity and load bearing capacity beyond most other single holder alternatives. Rounded edges on the J-hooks allow support of the appropriate bend radius of high performance data cables. Cost effective alternative to expensive cable trays. Conforms to EN 50174-2. Conforms to ISO®/IEC 14763-2, ANSI®/TIA 568 and ANSI®/TIA 569.
Sales unit: 50 pieces
Lieske Part No.: 1324112

Reduces tension per TIA 568-C.5.3.1 during installation of high-performance data cables. Includes bracket, screw, mounting bracket, post connector, snap hook and support bracket.
Sales unit: 2 pieces
Lieske Part No.: 1259594