Long tray, cable diameter: 12-16 mm, sendzimir galvanized
Lieske Part No.: 1331014

Long tray, cable diameter: 16-20 mm, sendzimir galvanized
Lieske Part No.: 1331013

Long tray, cable diameter: 40-44 mm, sendzimir galvanized
Lieske Part No.: 1331012

Long tray, cable diameter: 44-48 mm, sendzimir galvanized
Lieske Part No.: 1331011

GRIPPLE set cross anchor and express lock, quick suspension system, versatile and ready to use, for attachment to steel, concrete or wooden beams. The load-bearing capacity F only applies to assembly according to regulations. Set consists of: 1 cut-to-length wire rope with cross anchor for drill hole and end sleeve 1 self-locking GRIPPLE for quick attachment with express lock (integrated adjustment system) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 1 m Drill hole Ø: 8 mm Load-bearing capacity F: 0.45 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 467978

Profile clamp including M 8 stud screw with slotted hexagon head and clamping plate, for clamping to support profiles with parallel flanges or with slanted flanges up to a maximum of 14% inclination and as a supply line to the energy consumers. The fastening materials used can vary depending on the application! Dimensions (approx. dimensions) H x W x L: 57 x 40 x 47 mm Threaded connections: M 8 Load capacity specification vertical nominal load F1: 1.8 kN Load capacity specification vertical nominal load F2: 1.6 kN Flange thickness of the support t: 6 - 35 mm Screw tightening torque: 4 Nm Wrench size: SW 13 Material: Stainless steel, material no. 1.4571
Sales unit: 25 pieces
Lieske Part No.: 468457

E-clips, flange claw, for hammering onto a wide range of support flanges. Dimensions (approx. dimensions) for flange thickness T: 14 - 20 mm Clamping depth C: 33 mm Mounting distance to support flange B: 7.5 mm Side and bottom connection: M 6 Connection hole: Ø 7 mm Load capacity F: 0.45 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 100 pieces
Lieske Part No.: 460701

E-clips, flange claw with angle hanger, for hammering onto a wide range of support flanges, for threaded rod suspensions. Dimensions (approx. dimensions) for flange thickness T: 8 - 14 mm for connecting threaded rod: M 8 Distance to flange surface A: 54 mm Load capacity F: 0.68 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 460706

E-clips, flange claw 180°, for hammering onto a wide range of support flanges, for threaded rod suspension. Dimensions (approx. dimensions) for flange thickness T: 8 - 14 mm Impact depth B: 20.3 mm Tab distance to flange edge A: 26 mm Connection hole: Ø 6.5 mm Load capacity F: 0.2 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 100 pieces
Lieske Part No.: 460711

E-clips, flange claw 180°, for hammering onto a wide range of support flanges, for threaded rod suspension. Dimensions (approx. dimensions) for flange thickness T: 14 - 20 mm Impact depth B: 20.3 mm Tab distance to flange edge A: 26.6 mm Connection hole: Ø 6.5 mm Load capacity F: 0.2 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 100 pieces
Lieske Part No.: 460712

E-clips, flange claw with pipe clip, for striking with a hammer on various support flanges, pipe clip on flange claw can be rotated, for pipe suspension. Dimensions (approx. dimensions) for flange thickness T: 14 - 20 mm Impact depth B: 26.6 mm for pipe Ø: 18 - 25 mm Load capacity F: 0.07 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 460717

E-clips, flange claw with pipe clip, for striking with a hammer on various support flanges, pipe clip on flange claw can be rotated, for pipe suspension. Dimensions (approx. dimensions) for flange thickness T: 14 - 20 mm Impact depth B: 26.6 mm for pipe Ø: 29 - 33 mm Load capacity F: 0.07 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 460718

E-clips, universal flange claw with pipe clip, for striking with a hammer on a wide variety of support flanges, pipe clip on flange claw can be rotated, for pipe suspension. For flange thickness T: 14 - 20 mm Clamping depth of the flange claw: 33 mm For pipe Ø: 26 - 32 mm Load capacity F: 0.45 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 460720

E-clips, universal flange claw with pipe clip, for hammering onto a wide range of support flanges, pipe clip can be rotated on the flange claw, for pipe suspension. For flange thickness T: 14 - 20 mm Clamping depth of the flange claw: 33 mm For pipe Ø: 32 - 40 mm Load capacity F: 0.45 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 460721

E-clips, pipe clamp with rubber insert, two-part, with threaded connection for both thread sizes, for threaded rod suspension. Dimensions (approx. dimensions) for pipe Ø: 20 - 25 mm for threaded connection: M 8 / M 10 Pipe clamp material: steel, galvanized/chromated according to DIN 50021 Rubber insert material: TPE (thermoplastic elastomers)
Sales unit: 50 pieces
Lieske Part No.: 460738

E-clips, flange claw, for hammering onto a wide range of support flanges. Dimensions (approx. dimensions) for flange thickness T: 14 - 20 mm Impact depth B: 26.6 mm Fastening holes: Ø 6.5 mm Hole spacing to flange surface A: 30 mm Load capacity F: 0.9 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 100 pieces
Lieske Part No.: 1315700

E-clips, flange claw with pipe clip, for striking with a hammer on various support flanges, pipe clip on flange claw can be rotated, for pipe suspension. Dimensions (approx. dimensions) for flange thickness T: 14 - 20 mm Impact depth B: 26.6 mm for pipe Ø: 22 - 29 mm Load capacity F: 0.07 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 1315959

E-clips, flange claw with pipe clip, for striking with a hammer on various support flanges, pipe clip can be rotated on the flange claw, for pipe suspension. Dimensions (approx. dimensions) for flange thickness T: 1.5 - 3 mm Impact depth B: 12.5 mm for pipe Ø: 19 - 26 mm Load capacity F: 0.12 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 460714

E-clips, flange claw with angle hanger, for hammering onto various support flanges, for threaded rod suspensions. Dimensions (approx. dimensions) for flange thickness T: 3 - 8 mm for connecting threaded rod: M 10 Distance to flange surface A: 46 mm Load capacity F: 0.68 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 629431

E-clips, universal holding claw, for hammering onto a wide range of support flanges, flexible tab for laying and guiding cables and lines. Dimensions (approx. dimensions) for flange thickness T: 3 - 8 mm Impact depth B: 26.6 mm Tab length A: 58 mm Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 1315956

E-clips, flange claw with pipe clip, for striking with a hammer on various support flanges, pipe clip on flange claw can be rotated, for pipe suspension. Dimensions (approx. dimensions) for flange thickness T: 8 - 14 mm Impact depth B: 20.3 mm for pipe Ø: 26 - 32 mm Load capacity F: 0.12 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 733965

E-clips, flange claw with pipe clip, for striking with a hammer on various support flanges, pipe clip on flange claw can be rotated, for laying the pipes within the support profiles, for pipe suspension. Dimensions (approx. dimensions) for flange thickness T: 8 - 14 mm Impact depth B: 20.3 mm for pipe Ø: 18 - 25 mm Load capacity F: 0.07 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 1315958

E-clips, flange claw with pipe clip, for striking with a hammer on various support flanges, pipe clip on flange claw can be rotated, for pipe suspension. Dimensions (approx. dimensions) for flange thickness T: 8 - 14 mm Impact depth B: 20.3 mm for pipe Ø: 22 - 29 mm Load capacity F: 0.07 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 539378

E-clips, flange claw with pipe clip, for striking with a hammer on various support flanges, pipe clip on flange claw can be rotated, for laying the pipes within the support profiles, for pipe suspension. Dimensions (approx. dimensions) for flange thickness T: 8 - 14 mm Impact depth B: 20.3 mm for pipe Ø: 29 - 33 mm Load capacity F: 0.07 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 189718

E-clips, flange claw with connector, for hammering onto a wide range of support flanges, with plastic connector attached to the front for attaching cables and wires, connector halogen-free. Dimensions (approx. dimensions) for cable ties: = width 9 mm x height 3.5 mm for flange thickness T: 8 - 14 mm Flange claw material: steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227 Connector material: PA (polyamide)
Sales unit: 25 pieces
Lieske Part No.: 460733

E-clips, flange claw, for impacting on a wide range of support flanges angled at 90°. Dimensions (approx. dimensions) for flange thickness T: 1.5 - 5 mm Impact depth B: 14 mm Connection fastening hole: Ø 6.5 mm center distance to the upper edge of impact angle: 42 mm Additional fastening hole: ¿ 6.5 mm center distance to connection fastening hole: 12 mm Load capacity F: 0.72 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 100 pieces
Lieske Part No.: 1315699

E-clips, flange claw 180°, for hammering onto a wide range of support flanges, for threaded rod suspension. Dimensions (approx. dimensions) for flange thickness T: 1.5 - 5 mm for connecting threaded rod: M 6 Distance to flange upper edge A: 70 mm Load capacity F: 0.68 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 705079

E-clips, screw clamp, for screwing onto a wide range of support flanges. Dimensions (approx. dimensions) for flange thickness T: 1 - 18 mm Height H: 40 mm Support width B: 22 mm for connecting threaded rod: M 6 Load capacity F: 0.6 kN Material: Steel, galvanized/chromated in accordance with DIN 50021
Sales unit: 25 pieces
Lieske Part No.: 190930

E-clips, screw clamp, for screwing onto a wide range of support flanges. Dimensions (approx. dimensions) for flange thickness T: 1 - 18 mm Height H: 40 mm Support width B: 22 mm for connecting threaded rod: M 8 Load capacity F: 0.6 kN Material: Steel, galvanized/chromated in accordance with DIN 50021
Sales unit: 25 pieces
Lieske Part No.: 924918

E-clips, steel cable, with 7 strands and 7 wires each, for universal suspension. Dimensions (approx. dimensions) Length L: 30000 mm Rope Ø: 3 mm Wire rope Strands: 7 Wires: 7 Load capacity F: 1.9 kN Material: Steel, hot-dip galvanized
Lieske Part No.: 1315954

Roof tile, concrete tile with hot-dip galvanized anchor rail 2986 and foam rubber pad, for laying cable trays, pipes, rails and cables using U-clamps, sliding nuts and screws, the installation is suitable e.g. on flat roof surfaces or for floor mounting, the foam rubber pad made of rot-proof material serves as a solid support surface and prevents damage to the existing roof covering, for cable tray fastening on the anchor rail sliding nut GMZ M... F please order separately. Please note: The roof-mounted installation must be coordinated with the building owner or specialist planner with regard to the possible additional loads depending on the location. Dimensions (approx. dimensions) Foam rubber pad H x W x L : 10 x 150 x 500 mm Concrete block H x W x L : 110 x 150 x 500 mm Anchor rail H x W x L : 22 x 40 x 500 mm Slot width : 18 mm Pad material : Foam rubber, halogen-free Stone material : Concrete Rail material : Steel, hot-dip galvanized in accordance with DIN EN ISO 1461
Lieske Part No.: 1344999

E-clips, universal claw for cable clamps, for striking with a hammer on a wide variety of support flanges and for holding up to three flange cable clamps, for cable and pipe fastening. for flange cable clamp: ECS... Dimensions (approx. dimensions) for flange thickness T: 15 - 20 mm Material: steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 100 pieces
Lieske Part No.: 480573

E-clips, flange cable clamp, for hammering onto various support flanges, for cable and pipe fastening. Dimensions (approx.) for flange thickness T: 8 - 12 mm for pipe Ø: 20 - 24 mm Material: steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 100 pieces
Lieske Part No.: 304639

E-clips, flange cable clamp, for hammering onto various support flanges, for cable and pipe fastening. Dimensions (approx.) for flange thickness T: 8 - 12 mm for pipe Ø: 25 - 32 mm Material: steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 100 pieces
Lieske Part No.: 460722

E-clips, flange cable clamp, for hammering onto various support flanges, for cable and pipe fastening. Dimensions (approx.) for flange thickness T: 4 - 7 mm for pipe Ø: 15 - 19 mm Material: steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 100 pieces
Lieske Part No.: 688486

E-clips, flange cable clamp, for hammering onto various support flanges, for cable and pipe fastening. Dimensions (approx.) for flange thickness T: 2 - 4 mm for pipe Ø: 15 - 19 mm Material: steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 100 pieces
Lieske Part No.: 270759

E-clips, flange cable clamp, for hammering onto various support flanges, for cable and pipe fastening. Dimensions (approx.) for flange thickness T: 2 - 4 mm for pipe Ø: 20 - 24 mm Material: steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 100 pieces
Lieske Part No.: 709088

E-clips, flange claw, for hammering onto a wide range of support flanges. Dimensions (approx. dimensions) for flange thickness T: 14 - 20 mm Clamping depth C: 33 mm Mounting distance to support flange B: 7.5 mm Side and bottom connection: M 6 Threaded connection: M 6x10 Load capacity F: 0.45 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 100 pieces
Lieske Part No.: 207995

E-clips, flange claw, for hammering onto a wide range of support flanges. Dimensions (approx. dimensions) for flange thickness T: 3 - 8 mm Clamping depth C: 33 mm Mounting distance to support flange B: 7.5 mm Side and bottom connection: M 6 Connection hole: Ø 7 mm Load capacity F: 0.45 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 100 pieces
Lieske Part No.: 414798

E-clips, flange claw, for hammering onto a wide range of support flanges. Dimensions (approx. dimensions) for flange thickness T: 3 - 8 mm Clamping depth C: 33 mm Mounting distance to support flange B: 7.5 mm Side and bottom connection: M 6 Threaded connection: M 6x10 Load capacity F: 0.45 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 100 pieces
Lieske Part No.: 1315698

E-clips, flange claw, for hammering onto a wide variety of support flanges. Dimensions (approx. dimensions) for flange thickness T: 8 - 14 mm Clamping depth C: 33 mm Mounting distance to support flange B: 7.5 mm Side and bottom connection: M 6 Threaded connection: M 6x10 Load capacity F: 0.45 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227 EP Material___________ EP Labor__________Unit price/pieceE-clips, flange claw, for hammering onto a wide variety of support flanges. for flange thickness: 8 - 14 mm Load capacity F: 0.45 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 100 pieces
Lieske Part No.: 840668

E-clips, universal flange claw with pipe clip, for striking with a hammer on a wide variety of support flanges, pipe clip on flange claw can be rotated, for pipe suspension. For flange thickness T: 3 - 8 mm Clamping depth of the flange claw: 33 mm For pipe Ø: 12 - 19 mm Load capacity F: 0.45 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 886709

E-clips, universal flange claw with pipe clip, for striking with a hammer on a wide variety of support flanges, pipe clip on flange claw can be rotated, for pipe suspension. For flange thickness T: 8 - 14 mm Clamping depth of the flange claw: 33 mm For pipe Ø: 12 - 19 mm Load capacity F: 0.45 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 289611

E-clips, universal flange claw with pipe clip, for striking with a hammer on a wide variety of support flanges, pipe clip on flange claw can be rotated, for pipe suspension. For flange thickness T: 8 - 14 mm Clamping depth of the flange claw: 33 mm For pipe Ø: 26 - 32 mm Load capacity F: 0.45 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 286896

E-clips, universal flange claw with pipe clip, for striking with a hammer on a wide variety of support flanges, pipe clip on flange claw can be rotated, for pipe suspension. For flange thickness T: 8 - 14 mm Clamping depth of the flange claw: 33 mm For pipe Ø: 22 - 29 mm Load capacity F: 0.11 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 1315957

E-clips, screw clamp, for screwing onto a wide range of support flanges. Dimensions (approx. dimensions) for flange thickness T: 1 - 19 mm Height H x Width B: 45 x 42 mm Width of lower leg: 50 mm for connecting threaded rod A: M 10 Load capacity F: 2.35 kN Material: Steel, galvanized/chromated in accordance with DIN 50021
Sales unit: 25 pieces
Lieske Part No.: 454878

E-clips, screw clamp, for screwing onto a wide range of support flanges. Dimensions (approx. dimensions) for flange thickness T: 1 - 19 mm Height H x Width B: 45 x 42 mm Width of lower leg A: 50 mm for threaded rod through hole: Ø 11 mm Load capacity F: 2.35 kN Material: Steel, galvanized/chromated in accordance with DIN 50021
Sales unit: 25 pieces
Lieske Part No.: 126748

E-clips, screw clamp, for screwing onto a wide range of support flanges. Dimensions (approx. dimensions) for flange thickness T: 1 - 23 mm Height H x Width B: 54 x 49 mm Width of lower leg A: 59 mm for threaded rod through hole: Ø 13 mm Load capacity F: 3 kN Material: Steel, galvanized/chromated in accordance with DIN 50021
Sales unit: 25 pieces
Lieske Part No.: 977519

E-clips, screw clamp, for screwing onto a wide range of support flanges. Dimensions (approx. dimensions) for flange thickness T: 1 - 19 mm Height H x Width B: 45 x 42 mm Width of lower leg A: 50 mm for connecting threaded rod: M 6 Load capacity F: 2.35 kN Material: Steel, galvanized/chromated in accordance with DIN 50021
Sales unit: 25 pieces
Lieske Part No.: 811615

E-clips, screw clamp, for screwing onto a wide range of support flanges. Dimensions (approx. dimensions) for flange thickness T: 1 - 19 mm Height H x Width B: 45 x 42 mm Width of lower leg A: 50 mm for connecting threaded rod: M 8 Load capacity F: 2.35 kN Material: Steel, galvanized/chromated in accordance with DIN 50021
Sales unit: 25 pieces
Lieske Part No.: 906491