E-clips, screw clamp, for screwing onto a wide range of support flanges. Dimensions (approx. dimensions) for flange thickness T: 1 - 19 mm Height H x Width B: 45 x 42 mm Width of lower leg: 50 mm for connecting threaded rod A: M 10 Load capacity F: 2.35 kN Material: Steel, galvanized/chromated in accordance with DIN 50021
Sales unit: 25 pieces
Lieske Part No.: 454878

E-clips, screw clamp, for screwing onto a wide range of support flanges. Dimensions (approx. dimensions) for flange thickness T: 1 - 19 mm Height H x Width B: 45 x 42 mm Width of lower leg A: 50 mm for threaded rod through hole: Ø 11 mm Load capacity F: 2.35 kN Material: Steel, galvanized/chromated in accordance with DIN 50021
Sales unit: 25 pieces
Lieske Part No.: 126748

E-clips, screw clamp, for screwing onto a wide range of support flanges. Dimensions (approx. dimensions) for flange thickness T: 1 - 23 mm Height H x Width B: 54 x 49 mm Width of lower leg A: 59 mm for threaded rod through hole: Ø 13 mm Load capacity F: 3 kN Material: Steel, galvanized/chromated in accordance with DIN 50021
Sales unit: 25 pieces
Lieske Part No.: 977519

E-clips, screw clamp, for screwing onto a wide range of support flanges. Dimensions (approx. dimensions) for flange thickness T: 1 - 19 mm Height H x Width B: 45 x 42 mm Width of lower leg A: 50 mm for connecting threaded rod: M 6 Load capacity F: 2.35 kN Material: Steel, galvanized/chromated in accordance with DIN 50021
Sales unit: 25 pieces
Lieske Part No.: 811615

E-clips, screw clamp, for screwing onto a wide range of support flanges. Dimensions (approx. dimensions) for flange thickness T: 1 - 19 mm Height H x Width B: 45 x 42 mm Width of lower leg A: 50 mm for connecting threaded rod: M 8 Load capacity F: 2.35 kN Material: Steel, galvanized/chromated in accordance with DIN 50021
Sales unit: 25 pieces
Lieske Part No.: 906491

E-clips, screw clamp, for screwing onto a wide range of support flanges. Dimensions (approx. dimensions) for flange thickness T: 1 - 18 mm Clamping surface D: 19.5 mm Threaded rod through hole A: 10.7 mm Threaded rod through hole B: 10.7 mm Side fastening holes: 2 x M 6 and Ø 6.5 mm Load capacity F: 0.45 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 100 pieces
Lieske Part No.: 460689

E-clips, screw clamp, for screwing onto a wide range of support flanges. Dimensions (approx. dimensions) for flange thickness: 1 - 18 mm Clamping surface D: 19.5 mm Threaded rod through hole A: 12.7 mm Threaded rod through hole B: 6.5 mm Side fastening holes: 2 x M 6 and Ø 6.5 mm Load capacity F: 0.45 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 100 pieces
Lieske Part No.: 834980

E-clips, screw clamp with one-piece pipe clip, for screwing onto a wide range of support flanges, pipe clip can be rotated on screw clamp, for pipe suspension. Dimensions (approx. dimensions) for flange thickness T: 1 - 18 mm clamping surface D: 19.5 mm for pipe Ø: 19 - 26 mm load capacity F: 0.45 kN material: steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 614532

GRIPPLE double spiral hook, for easy and quick attachment of GRIPPLE rope systems with loop. The load-bearing capacity F only applies if the anchoring to the supporting surface is sufficient and the installation is carried out in accordance with the regulations. Dimensions (approx. dimensions) Thread: M 6 Thread length: 20 mm for rope diameter: 1.5 - 3 mm Permissible load-bearing capacity F: 0.9 kN (5 times the safety against breakage depending on the rope thickness of the rope system used) Material: Steel, galvanized
Sales unit: 20 pieces
Lieske Part No.: 1316182

GRIPPLE spring clamp, for hanging components with holes on sheets or retaining lugs, for GRIPPLE cable systems. The load-bearing capacity F only applies if the cable is sufficiently anchored to the supporting surface and installed in accordance with the regulations. Dimensions (approx. dimensions) for cable Ø: 1.5 mm Hole Ø: 6 - max. 8 mm Load-bearing capacity F: 0.1 kN (3-fold safety against breakage) Material: Steel, galvanized
Sales unit: 100 pieces
Lieske Part No.: 1311260

GRIPPLE set threaded end M 6, including drop-in anchor, quick suspension system, versatile and ready to use, for fastening to concrete ceilings. The drop-in anchor is anchored using the GASWZ setting tool. The load-bearing capacity F only applies if the anchoring to the supporting surface is sufficient and the installation is carried out in accordance with the regulations. Set consists of: 1 cut-to-length wire rope with threaded end 1 drop-in anchor 1 self-locking GRIPPLE for quick fastening 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 1.5 mm Rope length L: 10 m Threaded end/drop-in anchor: M 6 Load-bearing capacity F: 0.1 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1316206

GRIPPLE set threaded end M 6, including drop anchor and express lock, quick suspension system, versatile and ready to use, for fastening to concrete ceilings. The drop anchor is anchored using the GASWZ setting tool. The load-bearing capacity F only applies if the anchoring to the supporting surface is sufficient and the installation is carried out in accordance with the regulations. Set consists of: 1 cut-to-length wire rope with threaded end 1 drop anchor 1 self-locking GRIPPLE for quick fastening with express lock (integrated adjustment system) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 1 m Threaded end/drop anchor: M 6 Load-bearing capacity F: 0.45 kN (5 times the safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1327264

GRIPPLE set threaded end M 6, including drop anchor and express lock, quick suspension system, versatile and ready to use, for fastening to concrete ceilings. The drop anchor is anchored using the GASWZ setting tool. The load-bearing capacity F only applies if the anchoring to the supporting surface is sufficient and the installation is carried out in accordance with the regulations. Set consists of: 1 cut-to-length wire rope with threaded end 1 drop anchor 1 self-locking GRIPPLE for quick fastening with express lock (integrated adjustment system) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 2 m Threaded end/drop anchor: M 6 Load-bearing capacity F: 0.45 kN (5 times the safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1332538

GRIPPLE set threaded end M 6, including drop anchor and express lock, quick suspension system, versatile and ready to use, for fastening to concrete ceilings. The drop anchor is anchored using the GASWZ setting tool. The load-bearing capacity F only applies if the anchoring to the supporting surface is sufficient and the installation is carried out in accordance with the regulations. Set consists of: 1 cut-to-length wire rope with threaded end 1 drop anchor 1 self-locking GRIPPLE for quick fastening with express lock (integrated adjustment system) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 3 m Threaded end/drop anchor: M 6 Load-bearing capacity F: 0.45 kN (5 times the safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1332694

GRIPPLE set threaded end M 6, including drop anchor and express lock, quick suspension system, versatile and ready to use, for fastening to concrete ceilings. The drop anchor is anchored using the GASWZ setting tool. The load-bearing capacity F only applies if the anchoring to the supporting surface is sufficient and the installation is carried out in accordance with the regulations. Set consists of: 1 cut-to-length wire rope with threaded end 1 drop anchor 1 self-locking GRIPPLE for quick fastening with express lock (integrated adjustment system) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 5 m Threaded end/drop anchor: M 6 Load-bearing capacity F: 0.45 kN (5 times the safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1332693

GRIPPLE set threaded end M 6, including drop-in anchor, quick suspension system, versatile and ready to use, for fastening to concrete ceilings. The drop-in anchor is anchored using the GASWZ setting tool. The load-bearing capacity F only applies if the anchoring to the supporting surface is sufficient and the installation is carried out in accordance with the regulations. Set consists of: 1 cut-to-length wire rope with threaded end 1 drop-in anchor 1 self-locking GRIPPLE for quick fastening 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 3 mm Rope length L: 1 m Threaded end/drop-in anchor: M 6 Load-bearing capacity F: 0.9 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1316175

GRIPPLE set threaded end M 6, including drop-in anchor, quick suspension system, versatile and ready to use, for fastening to concrete ceilings. The drop-in anchor is anchored using the GASWZ setting tool. The load-bearing capacity F only applies if the anchoring to the supporting surface is sufficient and the installation is carried out in accordance with the regulations. Set consists of: 1 cut-to-length wire rope with threaded end 1 drop-in anchor 1 self-locking GRIPPLE for quick fastening 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 3 mm Rope length L: 10 m Threaded end/drop-in anchor: M 6 Load-bearing capacity F: 0.9 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1316219

GRIPPLE set threaded end M 6, including drop-in anchor, quick suspension system, versatile and ready to use, for fastening to concrete ceilings. The drop-in anchor is anchored using the GASWZ setting tool. The load-bearing capacity F only applies if the anchoring to the supporting surface is sufficient and the installation is carried out in accordance with the regulations. Set consists of: 1 cut-to-length wire rope with threaded end 1 drop-in anchor 1 self-locking GRIPPLE for quick fastening 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 3 mm Rope length L: 2 m Threaded end/drop-in anchor: M 6 Load-bearing capacity F: 0.9 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1316132

GRIPPLE set threaded end M 8, including drop-in anchor, quick suspension system, versatile and ready to use, for fastening to concrete ceilings. The drop-in anchor is anchored using the GASWZ setting tool. The load-bearing capacity F only applies if the anchoring to the supporting surface is sufficient and the installation is carried out in accordance with the regulations. Set consists of: 1 cut-to-length wire rope with threaded end 1 drop-in anchor 1 self-locking GRIPPLE for quick fastening 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 1 m Threaded end/drop-in anchor: M 8 Load-bearing capacity F: 0.45 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1319595

GRIPPLE set threaded end M 8, including drop-in anchor, quick suspension system, versatile and ready to use, for fastening to concrete ceilings. The drop-in anchor is anchored using the GASWZ setting tool. The load-bearing capacity F only applies if the anchoring to the supporting surface is sufficient and the installation is carried out in accordance with the regulations. Set consists of: 1 cut-to-length wire rope with threaded end 1 drop-in anchor 1 self-locking GRIPPLE for quick fastening 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 10 m Threaded end/drop-in anchor: M 8 Load-bearing capacity F: 0.45 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1319529

GRIPPLE set threaded end M 8, including drop-in anchor, quick suspension system, versatile and ready to use, for fastening to concrete ceilings. The drop-in anchor is anchored using the GASWZ setting tool. The load-bearing capacity F only applies if the anchoring to the supporting surface is sufficient and the installation is carried out in accordance with the regulations. Set consists of: 1 cut-to-length wire rope with threaded end 1 drop-in anchor 1 self-locking GRIPPLE for quick fastening 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 2 m Threaded end/drop-in anchor: M 8 Load-bearing capacity F: 0.45 kN (5-fold safety against breakage) Wire rope material: steel, galvanized NIEDAX model no.: GAG8-2/2
Sales unit: 10 pieces
Lieske Part No.: 1319594

GRIPPLE set threaded end M 8, including drop-in anchor, quick suspension system, versatile and ready to use, for fastening to concrete ceilings. The drop-in anchor is anchored using the GASWZ setting tool. The load-bearing capacity F only applies if the anchoring to the supporting surface is sufficient and the installation is carried out in accordance with the regulations. Set consists of: 1 cut-to-length wire rope with threaded end 1 drop-in anchor 1 self-locking GRIPPLE for quick fastening 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 3 m Threaded end/drop-in anchor: M 8 Load-bearing capacity F: 0.45 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1319593

GRIPPLE Set-Gewindeende M 8, einschließlich Einschlaganker und Expressverschluß, schnelles Aufhängesystem, vielseitig einsetzbar und gebrauchsfertig, zur Befestigung an Betondecken. Die Verankerung des Einschlagankers erfolgt mittels Setzwerkzeug GASWZ. Die Tragfähigkeitsangaben F gelten nur bei ausreichender Verankerung mit dem tragenden Untergrund und vorschriftsmäßiger Montage. Set besteht aus: 1 abgelängtes Drahtseil mit Gewindeende 1 Einschlaganker 1 selbstsichernder GRIPPLE zur Schnellbefestigung mit Expressverschluß (integriertem Justiersystem) Abmessungen (ca. Maße) Seil-Ø : 2 mm Seillänge L : 3 m Gewindeende/Einschlaganker : M 8 Tragfähigkeit zul. F : 0,45 kN (5-fache Sicherheit gegen Bruch) Werkstoff Drahtseil : Stahl, galvanisch verzinkt
Sales unit: 10 pieces
Lieske Part No.: 334828

GRIPPLE set threaded end M 8, including drop-in anchor, quick suspension system, versatile and ready to use, for fastening to concrete ceilings. The drop-in anchor is anchored using the GASWZ setting tool. The load-bearing capacity F only applies if the anchoring to the supporting surface is sufficient and the installation is carried out in accordance with the regulations. Set consists of: 1 cut-to-length wire rope with threaded end 1 drop-in anchor 1 self-locking GRIPPLE for quick fastening 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 4 m Threaded end/drop-in anchor: M 8 Load-bearing capacity F: 0.45 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1319592

GRIPPLE set threaded end M 8, including drop-in anchor, quick suspension system, versatile and ready to use, for fastening to concrete ceilings. The drop-in anchor is anchored using the GASWZ setting tool. The load-bearing capacity F only applies if the anchoring to the supporting surface is sufficient and the installation is carried out in accordance with the regulations. Set consists of: 1 cut-to-length wire rope with threaded end 1 drop-in anchor 1 self-locking GRIPPLE for quick fastening 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 5 m Threaded end/drop-in anchor: M 8 Load-bearing capacity F: 0.45 kN (5 times the safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1319591

GRIPPLE Set-Gewindeende M 8, einschließlich Einschlaganker und Expressverschluß, schnelles Aufhängesystem, vielseitig einsetzbar und gebrauchsfertig, zur Befestigung an Betondecken. Die Verankerung des Einschlagankers erfolgt mittels Setzwerkzeug GASWZ. Die Tragfähigkeitsangaben F gelten nur bei ausreichender Verankerung mit dem tragenden Untergrund und vorschriftsmäßiger Montage. Set besteht aus: 1 abgelängtes Drahtseil mit Gewindeende 1 Einschlaganker 1 selbstsichernder GRIPPLE zur Schnellbefestigung mit Expressverschluß (integriertem Justiersystem) Abmessungen (ca. Maße) Seil-Ø : 2 mm Seillänge L : 5 m Gewindeende/Einschlaganker : M 8 Tragfähigkeit zul. F : 0,45 kN (5-fache Sicherheit gegen Bruch) Werkstoff Drahtseil : Stahl, galvanisch verzinkt
Sales unit: 10 pieces
Lieske Part No.: 334792

GRIPPLE set threaded end M 8, including drop-in anchor, quick suspension system, versatile and ready to use, for fastening to concrete ceilings. The drop-in anchor is anchored using the GASWZ setting tool. The load-bearing capacity F only applies if the anchoring to the supporting surface is sufficient and the installation is carried out in accordance with the regulations. Set consists of: 1 cut-to-length wire rope with threaded end 1 drop-in anchor 1 self-locking GRIPPLE for quick fastening 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 8 m Threaded end/drop-in anchor: M 8 Load-bearing capacity F: 0.45 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1319590

GRIPPLE set threaded end M 8, including drop-in anchor, quick suspension system, versatile and ready to use, for fastening to concrete ceilings. The drop-in anchor is anchored using the GASWZ setting tool. The load-bearing capacity F only applies if the anchoring to the supporting surface is sufficient and the installation is carried out in accordance with the regulations. Set consists of: 1 cut-to-length wire rope with threaded end 1 drop-in anchor 1 self-locking GRIPPLE for quick fastening 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 3 mm Rope length L: 1 m Threaded end/drop-in anchor: M 8 Load-bearing capacity F: 0.9 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1319603

GRIPPLE set threaded end M 8, including drop-in anchor, quick suspension system, versatile and ready to use, for fastening to concrete ceilings. The drop-in anchor is anchored using the GASWZ setting tool. The load-bearing capacity F only applies if the anchoring to the supporting surface is sufficient and the installation is carried out in accordance with the regulations. Set consists of: 1 cut-to-length wire rope with threaded end 1 drop-in anchor 1 self-locking GRIPPLE for quick fastening 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 3 mm Rope length L: 10 m Threaded end/drop-in anchor: M 8 Load-bearing capacity F: 0.9 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1319754

GRIPPLE set threaded end M 8, including drop-in anchor, quick suspension system, versatile and ready to use, for fastening to concrete ceilings. The drop-in anchor is anchored using the GASWZ setting tool. The load-bearing capacity F only applies if the anchoring to the supporting surface is sufficient and the installation is carried out in accordance with the regulations. Set consists of: 1 cut-to-length wire rope with threaded end 1 drop-in anchor 1 self-locking GRIPPLE for quick fastening 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 3 mm Rope length L: 2 m Threaded end/drop-in anchor: M 8 Load-bearing capacity F: 0.9 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1319742

GRIPPLE set threaded end M 8, including drop-in anchor, quick suspension system, versatile and ready to use, for fastening to concrete ceilings. The drop-in anchor is anchored using the GASWZ setting tool. The load-bearing capacity F only applies if the anchoring to the supporting surface is sufficient and the installation is carried out in accordance with the regulations. Set consists of: 1 cut-to-length wire rope with threaded end 1 drop-in anchor 1 self-locking GRIPPLE for quick fastening 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 3 mm Rope length L: 3 m Threaded end/drop-in anchor: M 8 Load-bearing capacity F: 0.9 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1319646

GRIPPLE set threaded end M 8, including drop-in anchor, quick suspension system, versatile and ready to use, for fastening to concrete ceilings. The drop-in anchor is anchored using the GASWZ setting tool. The load-bearing capacity F only applies if the anchoring to the supporting surface is sufficient and the installation is carried out in accordance with the regulations. Set consists of: 1 cut-to-length wire rope with threaded end 1 drop-in anchor 1 self-locking GRIPPLE for quick fastening 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 3 mm Rope length L: 4 m Threaded end/drop-in anchor: M 8 Load-bearing capacity F: 0.9 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1319755

GRIPPLE set hooks, quick suspension system, versatile and ready to use, for attachment to supports, mesh cable trays, profile clamps, flange claws, loops and eyelets. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut-to-length wire rope with a hook at the end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest unit) Dimensions (approx. dimensions) Rope Ø: 1.5 mm Rope length L: 1 m Load-bearing capacity F: 0.1 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1312901

GRIPPLE set hooks, quick suspension system, versatile and ready to use, for attachment to supports, mesh cable trays, profile clamps, flange claws, loops and eyelets. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut wire rope with a hook at the end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 1.5 mm Rope length L: 10 m Load-bearing capacity F: 0.1 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1312893

GRIPPLE set hooks, quick suspension system, versatile and ready to use, for attachment to supports, mesh cable trays, profile clamps, flange claws, loops and eyelets. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut-to-length wire rope with a hook at the end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest unit) Dimensions (approx. dimensions) Rope Ø: 1.5 mm Rope length L: 3 m Load-bearing capacity F: 0.1 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1312900

GRIPPLE set hooks, quick suspension system, versatile and ready to use, for attachment to supports, mesh trays, profile clamps, flange claws, loops and eyelets. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut-to-length wire rope with a hook at the end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 1.5 mm Rope length L: 4 m Load-bearing capacity F: 0.1 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1312899

GRIPPLE set hooks, quick suspension system, versatile and ready to use, for attachment to supports, mesh cable trays, profile clamps, flange claws, loops and eyelets. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut-to-length wire rope with a hook at the end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest unit) Dimensions (approx. dimensions) Rope Ø: 1.5 mm Rope length L: 5 m Load-bearing capacity F: 0.1 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1312898

GRIPPLE set hooks, quick suspension system, versatile and ready to use, for attachment to supports, mesh cable trays, profile clamps, flange claws, loops and eyelets. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut wire rope with a hook at the end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 10 m Load-bearing capacity F: 0.45 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1312908

GRIPPLE set hooks, quick suspension system, versatile and ready to use, for attachment to supports, mesh trays, profile clamps, flange claws, loops and eyelets. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut-to-length wire rope with a hook at the end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest unit) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 2 m Load-bearing capacity F: 0.45 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 124832

GRIPPLE set hooks, quick suspension system, versatile and ready to use, for attachment to supports, mesh trays, profile clamps, flange claws, loops and eyelets. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut-to-length wire rope with a hook at the end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest unit) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 3 m Load-bearing capacity F: 0.45 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 213195

GRIPPLE set hooks, quick suspension system, versatile and ready to use, for attachment to supports, mesh trays, profile clamps, flange claws, loops and eyelets. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut wire rope with a hook at the end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest unit) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 4 m Load-bearing capacity F: 0.45 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1312897

GRIPPLE set hooks, quick suspension system, versatile and ready to use, for attachment to supports, mesh cable trays, profile clamps, flange claws, loops and eyelets. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut-to-length wire rope with a hook at the end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest unit) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 5 m Load-bearing capacity F: 0.45 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1312896

GRIPPLE set hooks, quick suspension system, versatile and ready to use, for attachment to supports, mesh cable trays, profile clamps, flange claws, loops and eyelets. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut-to-length wire rope with a hook at the end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest unit) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 8 m Load-bearing capacity F: 0.45 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1312879

GRIPPLE set hooks, quick suspension system, versatile and ready to use, for attachment to supports, mesh trays, profile clamps, flange claws, loops and eyelets. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut wire rope with a hook at the end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest unit) Dimensions (approx. dimensions) Rope Ø: 3 mm Rope length L: 1 m Load-bearing capacity F: 0.9 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 446892

GRIPPLE set hooks, quick suspension system, versatile and ready to use, for attachment to supports, mesh cable trays, profile clamps, flange claws, loops and eyelets. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut-to-length wire rope with a hook at the end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest unit) Dimensions (approx. dimensions) Rope Ø: 3 mm Rope length L: 2 m Load-bearing capacity F: 0.9 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 287477

GRIPPLE set hooks, quick suspension system, versatile and ready to use, for attachment to supports, mesh cable trays, profile clamps, flange claws, loops and eyelets. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut-to-length wire rope with a hook at the end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest unit) Dimensions (approx. dimensions) Rope Ø: 3 mm Rope length L: 3 m Load-bearing capacity F: 0.9 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 945591

GRIPPLE set hooks, quick suspension system, versatile and ready to use, for attachment to supports, mesh trays, profile clamps, flange claws, loops and eyelets. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut wire rope with a hook at the end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest unit) Dimensions (approx. dimensions) Rope Ø: 3 mm Rope length L: 4 m Load-bearing capacity F: 0.9 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1312895

GRIPPLE hooks without dowels with driving aid included per smallest unit (100 hooks), for direct fastening in concrete ceilings and natural stone, for GRIPPLE cable systems. The load-bearing capacity F only applies if the cable is sufficiently anchored to the supporting surface and installed in accordance with the regulations. Dimensions (approx. dimensions) for cable Ø: 1.5 mm and 2 mm Drilling Ø: 8 mm Minimum drilling depth: 30 mm Load-bearing capacity F: 0.45 kN (3-fold safety against breakage depending on the material thickness of the cable system used) Material: stainless steel, material no. 1.4401 (316)
Sales unit: 100 pieces
Lieske Part No.: 1311259

GRIPPLE set loop, quick suspension system, versatile and ready to use, for attachment to steel, concrete or wooden supports. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut-to-length wire rope with loop end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 1.5 mm Rope length L: 10 m Load-bearing capacity F: 0.1 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1427333

GRIPPLE set loop, quick suspension system, versatile and ready to use, for attachment to steel, concrete or wooden supports. The load-bearing capacity F only applies to assembly according to regulations. Set consists of: 1 cut-to-length wire rope with loop end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 1.5 mm Rope length L: 4 m Load-bearing capacity F: 0.1 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1427334