Die fischer Abdeckkappe AK bildet den Abschluss an den Enden der Montageschiene FLS sowie der Auslegerkonsole ALK. Die Abdeckkappe bietet Schutz vor Verletzungen und rundet das Profil optisch ab. Die Abdeckkappe AK wird passend zu den drei Profilgrößen der Montageschienen FLS aus Polypropylen in der Farbe Schwarz angeboten.
Sales unit: 50 pieces
Lieske Part No.: 1356753

Die fischer Winkelstütze WS 31-45° gibt einer Tragekonstruktion sehr hohe Stabilität und Sicherheit. Die Abmessung der Winkelkonsole gewährleistet durch die Passgenauigkeit eine sichere Verbindung mit ALK Konsolen und FLS Montageschienen. Die Winkelstütze trägt die Last entweder an die Wand oder an eine Montageschienenkonstruktion ab. Die FSM Clix P Schiebemutter und eine Schraube schaffen die Verbindung zum Montageschienenprofil. Die Ausführung mit galvanischer Verzinkung ist für Installationen in Gebäuden geeignet.
Sales unit: 10 pieces
Lieske Part No.: 1356759

Die fischer Trägerkralle TKR 31 eignet sich zur Befestigung von Rohren und Kanälen direkt am Stahlträger. Die TKR 31 kann durch die unterschiedlichen Längen der Krallenseiten an allen gängigen Stahlträgern befestigt werden. Für das Befestigen ist kein Bohren oder Schweißen notwendig. Die Trägerkrallen können demontiert werden. Die Ausführung mit galvanischer Verzinkung ist für Installationen in Gebäuden geeignet.
Sales unit: 25 pieces
Lieske Part No.: 1356599

Der fischer Sammelhalter Metall SHA M bietet eine hohe mechanische Festigkeit. Mit ihm können Elektrokabel z. B. in Zwischendecken gebündelt und befestigt werden. Dank des werkzeuglos zu bedienenden Verschlusses kann der Sammelhalter einfach nachbelegt werden. Der Sammelhalter kann mit dem Nagelanker FNA II schnell und wirtschaftlich an Wänden und Decken befestigt werden. Er ist zugelassen auch als kabelspezifische Variante für den elektrischen Funktionserhalt nach DIN 4102 Teil 12.
Sales unit: 50 pieces
Lieske Part No.: 543526

Der fischer Sammelhalter Metall SHA M bietet eine hohe mechanische Festigkeit. Mit ihm können Elektrokabel z. B. in Zwischendecken gebündelt und befestigt werden. Dank des werkzeuglos zu bedienenden Verschlusses kann der Sammelhalter einfach nachbelegt werden. Der Sammelhalter kann mit dem Nagelanker FNA II schnell und wirtschaftlich an Wänden und Decken befestigt werden. Er ist zugelassen auch als kabelspezifische Variante für den elektrischen Funktionserhalt nach DIN 4102 Teil 12.
Sales unit: 10 pieces
Lieske Part No.: 543527

Goobay Cable Management 3-Slots, white, white, sandwich blister - set of 4 for organizing and fixing space for up to 3 cables for order in the office or at home, durable and strong 3M adhesive surface
Lieske Part No.: 1493996

Goobay cable guide for the desk, Black, Blister
For cables with a diameter of up to 6mm!
Prevents slipping of cables behind or under the table
Reuseable
no adhesive residue
Color: Black
Lieske Part No.: 836250

Goobay cable guide for the desk, white, Blister
For cables with a diameter of up to 6mm!
Prevents slipping of cables behind or under the table
Reuseable
no adhesive residue
Color white
Lieske Part No.: 819348

Nut M8 DIN EN 1661, galvanized steel, 10 pieces. Accessories for duct support system.
Lieske Part No.: 1595167

Screw M8x12 DIN 933, galvanized steel, 10 pieces. Accessories for duct support system.
Lieske Part No.: 1595097

Screw M8x22 DIN 933, galvanized steel, 10 pieces. Accessories for duct support system.
Lieske Part No.: 1595693

Screw M8x40 DIN 933, galvanized steel, 10 pieces. Accessories for duct support system.
Lieske Part No.: 1595393

Screw M8x65 DIN 933, galvanized steel, 10 pieces. Accessories for duct support system.
Lieske Part No.: 1595705

Disc 8.4 x 30 x 2.5 DIN 522, galvanized steel, 10 pieces. Accessories for duct support system.
Lieske Part No.: 1595704

Easy installation without damaging the surface of the carrier. Fast maintenance of the bundle by simply replacing the cable tie. The head of the tie can be brought into the optimal bundle position. Can be used with various sheet thicknesses. These elements were developed for the automotive and truck industry, but can be used in any area where a firm and permanent fastening is required. With the carrier clamps, cables, lines and hydraulic lines can be easily guided and fixed in agricultural machinery construction, the rail industry, but also in shipbuilding and industrial buildings.
Sales unit: 200 pieces
Lieske Part No.: 1055128

Easy installation without damaging the surface of the carrier. Fast maintenance of the bundle by simply replacing the cable tie. The head of the tie can be brought into the optimal bundle position. Can be used with various sheet thicknesses. These elements were developed for the automotive and truck industry, but can be used in any area where a firm and permanent fastening is required. With the carrier clamps, cables, lines and hydraulic lines can be easily guided and fixed in agricultural machinery construction, the rail industry, but also in shipbuilding and industrial buildings.
Sales unit: 200 pieces
Lieske Part No.: 1055129

Easy installation without damaging the surface of the carrier. Fast maintenance of the bundle by simply replacing the cable tie. The head of the tie can be brought into the optimal bundle position. Can be used with various sheet thicknesses. These elements were developed for the automotive and truck industry, but can be used in any area where a firm and permanent fastening is required. With the carrier clamps, cables, lines and hydraulic lines can be easily guided and fixed in agricultural machinery construction, the rail industry, but also in shipbuilding and industrial buildings.
Sales unit: 200 pieces
Lieske Part No.: 1055130

Easy installation without damaging the surface of the carrier. Fast maintenance of the bundle by simply replacing the cable tie. The head of the tie can be brought into the optimal bundle position. Can be used with various sheet thicknesses. These elements were developed for the automotive and truck industry, but can be used in any area where a firm and permanent fastening is required. With the carrier clamps, cables, lines and hydraulic lines can be easily guided and fixed in agricultural machinery construction, the rail industry, but also in shipbuilding and industrial buildings.
Sales unit: 200 pieces
Lieske Part No.: 1055131

Easy installation without damaging the surface of the carrier. Fast maintenance of the bundle by simply replacing the cable tie. The head of the tie can be brought into the optimal bundle position. Can be used with various sheet thicknesses. These elements were developed for the automotive and truck industry, but can be used in any area where a firm and permanent fastening is required. With the carrier clamps, cables, lines and hydraulic lines can be easily guided and fixed in agricultural machinery construction, the rail industry, but also in shipbuilding and industrial buildings.
Sales unit: 200 pieces
Lieske Part No.: 1055084

Long tray, cable diameter: 12-16 mm, sendzimir galvanized
Lieske Part No.: 1331014

Long tray, cable diameter: 16-20 mm, sendzimir galvanized
Lieske Part No.: 1331013

Long tray, cable diameter: 40-44 mm, sendzimir galvanized
Lieske Part No.: 1331012

Long tray, cable diameter: 44-48 mm, sendzimir galvanized
Lieske Part No.: 1331011

GRIPPLE set cross anchor and express lock, quick suspension system, versatile and ready to use, for attachment to steel, concrete or wooden beams. The load-bearing capacity F only applies to assembly according to regulations. Set consists of: 1 cut-to-length wire rope with cross anchor for drill hole and end sleeve 1 self-locking GRIPPLE for quick attachment with express lock (integrated adjustment system) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 1 m Drill hole Ø: 8 mm Load-bearing capacity F: 0.45 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 467978

Profile clamp including M 8 stud screw with slotted hexagon head and clamping plate, for clamping to support profiles with parallel flanges or with slanted flanges up to a maximum of 14% inclination and as a supply line to the energy consumers. The fastening materials used can vary depending on the application! Dimensions (approx. dimensions) H x W x L: 57 x 40 x 47 mm Threaded connections: M 8 Load capacity specification vertical nominal load F1: 1.8 kN Load capacity specification vertical nominal load F2: 1.6 kN Flange thickness of the support t: 6 - 35 mm Screw tightening torque: 4 Nm Wrench size: SW 13 Material: Stainless steel, material no. 1.4571
Sales unit: 25 pieces
Lieske Part No.: 468457

E-clips, flange claw, for hammering onto a wide range of support flanges. Dimensions (approx. dimensions) for flange thickness T: 14 - 20 mm Clamping depth C: 33 mm Mounting distance to support flange B: 7.5 mm Side and bottom connection: M 6 Connection hole: Ø 7 mm Load capacity F: 0.45 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 100 pieces
Lieske Part No.: 460701

E-clips, flange claw with angle hanger, for hammering onto a wide range of support flanges, for threaded rod suspensions. Dimensions (approx. dimensions) for flange thickness T: 8 - 14 mm for connecting threaded rod: M 8 Distance to flange surface A: 54 mm Load capacity F: 0.68 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 460706

E-clips, flange claw 180°, for hammering onto a wide range of support flanges, for threaded rod suspension. Dimensions (approx. dimensions) for flange thickness T: 8 - 14 mm Impact depth B: 20.3 mm Tab distance to flange edge A: 26 mm Connection hole: Ø 6.5 mm Load capacity F: 0.2 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 100 pieces
Lieske Part No.: 460711

E-clips, flange claw 180°, for hammering onto a wide range of support flanges, for threaded rod suspension. Dimensions (approx. dimensions) for flange thickness T: 14 - 20 mm Impact depth B: 20.3 mm Tab distance to flange edge A: 26.6 mm Connection hole: Ø 6.5 mm Load capacity F: 0.2 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 100 pieces
Lieske Part No.: 460712

E-Klips, Schraubklemme mit Winkelabhänger, zum Anschrauben an verschiedenste Trägerflansche, für Gewindestababhängung. Abmessungen (ca. Maße) für Flanschstärke T : 1 - 18 mm Klemmauflage D : 19,5 mm für Anschlussgewindestab : M 10 Tragfähigkeit F : 0,45 kN Werkstoff : Stahl, mechanisch verzinkt/passiviert nach DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 1276568

E-Klips, Flanschkralle mit Rohrclip, zum Aufschlagen mit dem Hammer auf verschiedenste Trägerflansche, Rohrclip an Flanschkralle drehbar, für Rohrabhängung. Abmessungen (ca. Maße) für Flanschstärke T : 14 - 20 mm Aufschlagtiefe B : 26,6 mm für Rohr-Ø : 26 - 32 mm Tragfähigkeit F : 0,12 kN Werkstoff : Stahl, mechanisch verzinkt/passiviert nach DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 1276569

E-clips, flange claw with pipe clip, for striking with a hammer on various support flanges, pipe clip on flange claw can be rotated, for pipe suspension. Dimensions (approx. dimensions) for flange thickness T: 14 - 20 mm Impact depth B: 26.6 mm for pipe Ø: 18 - 25 mm Load capacity F: 0.07 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 460717

E-clips, flange claw with pipe clip, for striking with a hammer on various support flanges, pipe clip on flange claw can be rotated, for pipe suspension. Dimensions (approx. dimensions) for flange thickness T: 14 - 20 mm Impact depth B: 26.6 mm for pipe Ø: 29 - 33 mm Load capacity F: 0.07 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 460718

E-clips, universal flange claw with pipe clip, for striking with a hammer on a wide variety of support flanges, pipe clip on flange claw can be rotated, for pipe suspension. For flange thickness T: 14 - 20 mm Clamping depth of the flange claw: 33 mm For pipe Ø: 26 - 32 mm Load capacity F: 0.45 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 460720

E-clips, universal flange claw with pipe clip, for hammering onto a wide range of support flanges, pipe clip can be rotated on the flange claw, for pipe suspension. For flange thickness T: 14 - 20 mm Clamping depth of the flange claw: 33 mm For pipe Ø: 32 - 40 mm Load capacity F: 0.45 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 460721

E-clips, pipe clamp with rubber insert, two-part, with threaded connection for both thread sizes, for threaded rod suspension. Dimensions (approx. dimensions) for pipe Ø: 20 - 25 mm for threaded connection: M 8 / M 10 Pipe clamp material: steel, galvanized/chromated according to DIN 50021 Rubber insert material: TPE (thermoplastic elastomers)
Sales unit: 50 pieces
Lieske Part No.: 460738

E-clips, flange claw, for hammering onto a wide range of support flanges. Dimensions (approx. dimensions) for flange thickness T: 14 - 20 mm Impact depth B: 26.6 mm Fastening holes: Ø 6.5 mm Hole spacing to flange surface A: 30 mm Load capacity F: 0.9 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 100 pieces
Lieske Part No.: 1315700

E-clips, flange claw with pipe clip, for striking with a hammer on various support flanges, pipe clip on flange claw can be rotated, for pipe suspension. Dimensions (approx. dimensions) for flange thickness T: 14 - 20 mm Impact depth B: 26.6 mm for pipe Ø: 22 - 29 mm Load capacity F: 0.07 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 1315959

E-clips, flange claw with pipe clip, for striking with a hammer on various support flanges, pipe clip can be rotated on the flange claw, for pipe suspension. Dimensions (approx. dimensions) for flange thickness T: 1.5 - 3 mm Impact depth B: 12.5 mm for pipe Ø: 19 - 26 mm Load capacity F: 0.12 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 460714

E-clips, flange claw with angle hanger, for hammering onto various support flanges, for threaded rod suspensions. Dimensions (approx. dimensions) for flange thickness T: 3 - 8 mm for connecting threaded rod: M 10 Distance to flange surface A: 46 mm Load capacity F: 0.68 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 629431

E-clips, universal holding claw, for hammering onto a wide range of support flanges, flexible tab for laying and guiding cables and lines. Dimensions (approx. dimensions) for flange thickness T: 3 - 8 mm Impact depth B: 26.6 mm Tab length A: 58 mm Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 1315956

E-clips, flange claw with pipe clip, for striking with a hammer on various support flanges, pipe clip on flange claw can be rotated, for pipe suspension. Dimensions (approx. dimensions) for flange thickness T: 8 - 14 mm Impact depth B: 20.3 mm for pipe Ø: 26 - 32 mm Load capacity F: 0.12 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 733965

E-clips, flange claw with pipe clip, for striking with a hammer on various support flanges, pipe clip on flange claw can be rotated, for laying the pipes within the support profiles, for pipe suspension. Dimensions (approx. dimensions) for flange thickness T: 8 - 14 mm Impact depth B: 20.3 mm for pipe Ø: 18 - 25 mm Load capacity F: 0.07 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 1315958

E-clips, flange claw with pipe clip, for striking with a hammer on various support flanges, pipe clip on flange claw can be rotated, for pipe suspension. Dimensions (approx. dimensions) for flange thickness T: 8 - 14 mm Impact depth B: 20.3 mm for pipe Ø: 22 - 29 mm Load capacity F: 0.07 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 539378

E-clips, flange claw with pipe clip, for striking with a hammer on various support flanges, pipe clip on flange claw can be rotated, for laying the pipes within the support profiles, for pipe suspension. Dimensions (approx. dimensions) for flange thickness T: 8 - 14 mm Impact depth B: 20.3 mm for pipe Ø: 29 - 33 mm Load capacity F: 0.07 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 189718

E-clips, flange claw with connector, for hammering onto a wide range of support flanges, with plastic connector attached to the front for attaching cables and wires, connector halogen-free. Dimensions (approx. dimensions) for cable ties: = width 9 mm x height 3.5 mm for flange thickness T: 8 - 14 mm Flange claw material: steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227 Connector material: PA (polyamide)
Sales unit: 25 pieces
Lieske Part No.: 460733

E-clips, flange claw, for impacting on a wide range of support flanges angled at 90°. Dimensions (approx. dimensions) for flange thickness T: 1.5 - 5 mm Impact depth B: 14 mm Connection fastening hole: Ø 6.5 mm center distance to the upper edge of impact angle: 42 mm Additional fastening hole: ¿ 6.5 mm center distance to connection fastening hole: 12 mm Load capacity F: 0.72 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 100 pieces
Lieske Part No.: 1315699

E-clips, flange claw 180°, for hammering onto a wide range of support flanges, for threaded rod suspension. Dimensions (approx. dimensions) for flange thickness T: 1.5 - 5 mm for connecting threaded rod: M 6 Distance to flange upper edge A: 70 mm Load capacity F: 0.68 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 705079

E-clips, screw clamp, for screwing onto a wide range of support flanges. Dimensions (approx. dimensions) for flange thickness T: 1 - 18 mm Height H: 40 mm Support width B: 22 mm for connecting threaded rod: M 6 Load capacity F: 0.6 kN Material: Steel, galvanized/chromated in accordance with DIN 50021
Sales unit: 25 pieces
Lieske Part No.: 190930

E-clips, screw clamp, for screwing onto a wide range of support flanges. Dimensions (approx. dimensions) for flange thickness T: 1 - 18 mm Height H: 40 mm Support width B: 22 mm for connecting threaded rod: M 8 Load capacity F: 0.6 kN Material: Steel, galvanized/chromated in accordance with DIN 50021
Sales unit: 25 pieces
Lieske Part No.: 924918