NIEDAX - Make: 855 ​​AL
pipe and cable mount bracket, aluminum, screws in stainless steel, with slotted fixing holes for Pg and metric pipes according to EN 60423rd slot: 6.4 x 10 mm for cable diameters 38 - 47 mm for conduit threads: Pg 36 for metric Rohrgr. M 40 NIEDAX model no. 855 AL Type: 855AL












Quantity: 1 unit.
Sales unit: 20 pieces
Lieske Part No.: 679463

NIEDAX - Make: 855 G
Pipe and cable clamp distance from galvanized steel strip galvanized to DIN EN 10346, screws to DIN ISO 4042, with internal thread connection M 6, for Pg and metric pipes according to DIN EN 60423rd

for cable diameters 38 - 47 mm

for conduit threads: Pg 36

for metric Rohrgr. M 40

NIEDAX model no. 855 G

Type: 855g
Item: 100 ST.
Sales unit: 20 pieces
Lieske Part No.: 181153

Pipe and cable spacer clamp, with internal connection thread M 6, for cables and electrical installation pipes in accordance with DIN EN 61386-21, when mounting on push-through anchor DAM 6X... or screw anchor NSA 6X55/SW10-M6, care must be taken that the connection thread of the push-through anchor does not protrude into the cable's clamping space, for screwing onto screw dowels with a thread length of up to 8 mm. For use in functional maintenance, please observe additional regulations! Dimensions (approx. dimensions) W x L : 16 x 79.5 mm Internal connection thread : M 6 for cable Ø : 38 - 47 mm for metric electrical installation pipes in accordance with DIN EN 60423 : M 40 Material : stainless steel, material no. 1.4571 Screw material : stainless steel, material no. 1.4571 Niedax model no. : 855 G E5
Sales unit: 20 pieces
Lieske Part No.: 218411

Pipe and cable spacing clamp, with long fastening hole, for cables and electrical installation pipes in accordance with DIN EN 61386-21, for screwing on with push-through anchor DAM 6X... or screw anchor NSA 6X.../FKK-T30. Dimensions (approx. dimensions) W x L : 18 x 89 mm Long fastening hole : 6.4 x 10 mm for cable Ø : 47 - 55 mm for metric electrical installation pipes in accordance with DIN EN 60423 : M 50 Material : Steel, strip galvanized in accordance with DIN EN 10346 Screw material : Steel, electrogalvanized in accordance with DIN EN ISO 4042 Niedax model no. : 856
Sales unit: 20 pieces
Lieske Part No.: 532823

NIEDAX - Make: AL 856
Pipe and cable clamp spacing, aluminum, screws in stainless steel, with slotted fixing holes for Pg and metric pipes according to DIN EN 60423rd

Long hole: 6.4 x 10 mm

for cable diameter: 47 - 55 mm

for conduit threads: Pg 42

for metric Rohrgr. M 50

NIEDAX model no. 856 AL

Type: 856AL
Quantity: 1 unit.
Sales unit: 20 pieces
Lieske Part No.: 128509

NIEDAX - Make: 856 G
Pipe and cable clamp distance from galvanized steel strip galvanized to DIN EN 10346, screws to DIN ISO 4042, with internal thread connection M 6, for Pg and metric pipes according to DIN EN 60423rd

for cable diameter: 47 - 55 mm

for conduit threads: Pg 42

for metric Rohrgr. M 50

NIEDAX model no. 856 G

Type: 856g
Item: 100 ST.
Sales unit: 20 pieces
Lieske Part No.: 453650

Pipe and cable spacer clamp, with internal connection thread M 6, for cables and electrical installation pipes in accordance with DIN EN 61386-21, when mounting on push-through anchor DAM 6X... or screw anchor NSA 6X55/SW10-M6, care must be taken that the connection thread of the push-through anchor does not protrude into the cable's clamping space, for screwing onto screw dowels with a thread length of up to 8 mm. Please observe additional regulations for use in functional maintenance! Dimensions (approx. dimensions) W x L : 18 x 89 mm Internal connection thread : M 6 for cable Ø : 47 - 55 mm for metric electrical installation pipes in accordance with DIN EN 60423 : M 50 Material : stainless steel, material no. 1.4571 Screw material : stainless steel, material no. 1.4571 Niedax model no. : 856 G E5
Sales unit: 20 pieces
Lieske Part No.: 218410

Pipe and cable spacing clamp, with long fastening hole, for cables and electrical installation pipes in accordance with DIN EN 61386-21, for screwing on with push-through anchor DAM 6X... or screw anchor NSA 6X.../FKK-T30. Dimensions (approx. dimensions) W x L : 18 x 100 mm Long fastening hole : 6.4 x 10 mm for cable Ø : 55 - 63 mm for metric electrical installation pipes in accordance with DIN EN 60423 : M 63 Material : Steel, strip galvanized in accordance with DIN EN 10346 Screw material : Steel, electrogalvanized in accordance with DIN EN ISO 4042 Niedax model no. : 857
Sales unit: 20 pieces
Lieske Part No.: 733700

NIEDAX - Make: AL 857
pipe and cable clamp spacing, aluminum, screws in stainless steel, with slotted fixing holes for Pg and metric pipes according to DIN EN 60423rd

Long hole: 6.4 x 10 mm

for cable diameters 55 - 63 mm for conduit threads: Pg 48 . Rohrgr for metric: M 63 . NIEDAX Model No.: 857 AL Type: 857AL








Quantity: 1 unit.
Sales unit: 20 pieces
Lieske Part No.: 429319

NIEDAX - Make: 857 G
pipe and cable spacer clip from strip galvanized steel galvanized to DIN EN 10346, screws to DIN ISO 4042, with connection internal thread M 6, for Pg and metric pipes according to DIN EN 60423rd for cable diameters 55 - 63 mm for conduit threads: Pg 48 for metric Rohrgr. M63 NIEDAX model no. 857 G Type: 857g










Item: 100 ST.
Sales unit: 20 pieces
Lieske Part No.: 152699

Pipe and cable spacer clamp, with internal connection thread M 6, for cables and electrical installation pipes in accordance with DIN EN 61386-21, when mounting on push-through anchor DAM 6X... or screw anchor NSA 6X55/SW10-M6, care must be taken that the connection thread of the push-through anchor does not protrude into the cable's clamping space, for screwing onto screw dowels with a thread length of up to 8 mm. For use in functional maintenance, please observe additional regulations! Dimensions (approx. dimensions) W x L : 18 x 100 mm Internal connection thread : M 6 for cable Ø : 55 - 63 mm for metric electrical installation pipes in accordance with DIN EN 60423 : M 63 Material : stainless steel, material no. 1.4571 Screw material : stainless steel, material no. 1.4571 Niedax model no. : 857 G E5
Sales unit: 20 pieces
Lieske Part No.: 1322976

E-clips, flange claw with pipe clip, for striking with a hammer on various support flanges, pipe clip on flange claw can be rotated, for pipe suspension. Dimensions (approx. dimensions) for flange thickness T: 14 - 20 mm Impact depth B: 26.6 mm for pipe Ø: 19 - 26 mm Load capacity F: 0.12 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 230522

E-clips, flange claw with pipe clip, for striking with a hammer on various support flanges, pipe clip on flange claw can be rotated, for pipe suspension. Dimensions (approx. dimensions) for flange thickness T: 3 - 8 mm Impact depth B: 20.3 mm for pipe Ø: 19 - 26 mm Load capacity F: 0.12 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 230546

E-clips, flange claw with pipe clip, for striking with a hammer on various support flanges, pipe clip on flange claw can be rotated, for pipe suspension. Dimensions (approx. dimensions) for flange thickness T: 8 - 14 mm Impact depth B: 20.3 mm for pipe Ø: 19 - 26 mm Load capacity F: 0.12 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 230533

Hammer foot clamp, with strip-galvanized steel pressure tray in accordance with DIN EN 10346, hammer foot clamp hot-dip galvanized in accordance with DIN EN ISO 1461, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter tray (GW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Assignment: 1 cable for cable Ø: 90 - 100 mm
Sales unit: 25 pieces
Lieske Part No.: 367955

Hammer foot clamp, with strip-galvanized steel pressure tray in accordance with DIN EN 10346, hammer foot clamp hot-dip galvanized in accordance with DIN EN ISO 1461, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter tray (GW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Assignment: 1 cable for cable Ø: 100 - 110 mm
Sales unit: 25 pieces
Lieske Part No.: 982105

NIEDAX - Manufacturer: B 12
Foot hammer-clamp, pressure trough in galvanized steel accor ding to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter sink (GW. ..) must be ordered separately are. For use in the functional integrity please follow additional rules!

Occupancy: 1 cable

for cable diameter 6 - 12 mm . NIEDAX Model No.: B 12th Type: B12




Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 684676

Hammer foot clamp, with strip-galvanized steel pressure pan according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter pans (GW...) and double pans (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 2 cables for cable Ø: 10 - 12 mm
Sales unit: 100 pieces
Lieske Part No.: 715792

Hammer foot clamp, with strip-galvanized steel pressure pan according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter pans (GW...) and double pans (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 3 cables for cable Ø: 9 - 12 mm
Sales unit: 100 pieces
Lieske Part No.: 316684

NIEDAX - Manufacturer: B 14
Hammerfoot-clamp, pressure trough in galvanized steel according to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter sink (GW / GWS ...) must be ordered separately. For use in the functional integrity please follow additional rules!

Occupancy: 1 cable

for cable diameters 10 - 14 mm

NIEDAX model no. B 14

Type: B14
Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 601528

Hammer foot clamp, with strip-galvanized steel pressure pan according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor channels 2970-2980 with 16-17 mm slot width, counter pans (GW/GWS...) and double pans (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 2 cables for cable Ø: 12 - 14 mm
Sales unit: 100 pieces
Lieske Part No.: 686266

Hammer foot clamp, with pressure tray and screw according to DIN EN ISO 1207, made entirely of aluminum, suitable for Niedax anchor rails 2970-2980 with 16-17 mm slot width, counter trays (GW...) and double trays (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 12 - 14 mm
Sales unit: 100 pieces
Lieske Part No.: 202779

NIEDAX - Manufacturer: B 14/2 E3
Hammerfoot-clamp with pressure trough, completely made ​​of stainless steel, material no. 1.4301, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter trays (GW. ..) and dual sinks (DW. ..) must be ordered separately. occupancy above the other 2 cables for cable diameters 12 - 14 mm NIEDAX model No.:. B 14/2 E3 Type: B14/2E3








Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 556878

Hammer foot clamp, with strip-galvanized steel pressure pan according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter pans (GW/GWS...) and double pans (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 3 cables for cable Ø: 12 - 14 mm
Sales unit: 100 pieces
Lieske Part No.: 548578

NIEDAX - Manufacturer: B 14 AL
Hammerfoot-clamp with pressure trough and screw according to DIN EN ISO 1207, all aluminum, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter sink (GW. ..) must be ordered separately .

Occupancy: 1 cable

for cable diameters 10 - 14 mm

NIEDAX model no. B 14 AL Type: B14AL


Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 625783

NIEDAX - Manufacturer: B 14 E3
Hammerfoot-clamp with pressure trough, completely made ​​of stainless steel, material no. 1.4301, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter sink (GW. ..) must be ordered separately.

Occupancy: 1 cable

for cable diameters 10 - 14 mm NIEDAX model no. B 14 E3 Type: B14E3




Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 156155

NIEDAX - Manufacturer: B 16
Hammerfoot-clamp, pressure trough in galvanized steel according to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter sink (GW / GWS ...) must be ordered separately. For use in the functional integrity please follow additional rules!

Occupancy: 1 cable

for cable diameters 12 - 16 mm

NIEDAX model no. B 16

Type: B16
Quantity: 1 unit.
Lieske Part No.: 310270

Hammer foot clamp, with strip-galvanized steel pressure pan according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor channels 2970-2980 with 16-17 mm slot width, counter pans (GW/GWS...) and double pans (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 2 cables for cable Ø: 14 - 16 mm
Sales unit: 100 pieces
Lieske Part No.: 570205

Hammer foot clamp, with strip-galvanized steel pressure pan according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter pans (GW/GWS...) and double pans (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 3 cables for cable Ø: 14 - 16 mm
Sales unit: 100 pieces
Lieske Part No.: 925836

NIEDAX - Manufacturer: B 18
Hammerfoot-clamp, pressure trough in galvanized steel according to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter sink (GW / GWS ...) must be ordered separately. For use in the functional integrity please follow additional rules!

Occupancy: 1 cable

for cable diameter: 14 - 18 mm

NIEDAX model no. B 18 Type: B18


Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 365107

Hammer foot clamp, with strip-galvanized steel pressure pan according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor channels 2970-2980 with 16-17 mm slot width, counter pans (GW/GWS...) and double pans (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 2 cables for cable Ø: 16 - 18 mm
Sales unit: 100 pieces
Lieske Part No.: 318804

Hammer foot clamp, with pressure tray and screw according to DIN EN ISO 1207, made entirely of aluminum, suitable for Niedax anchor rails 2970-2980 with 16-17 mm slot width, counter trays (GW...) and double trays (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 14 - 18 mm
Sales unit: 100 pieces
Lieske Part No.: 173159

NIEDAX - Manufacturer: B 18/2 E3
Hammerfoot-clamp with pressure trough, completely made of stainless steel, material no. 1.4301, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter trays (GW. ..) and dual sinks (DW. ..) must be ordered separately.

Occupancy over each other: 2 cable

for cable diameter: 16 - 18 mm

NIEDAX model no. B 18/2 E3

Type: B18/2E3
Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 698779

Hammer foot clamp, with strip-galvanized steel pressure pan according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor channels 2970-2980 with 16-17 mm slot width, counter pans (GW/GWS...) and double pans (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 3 cables for cable Ø: 16 - 18 mm
Sales unit: 100 pieces
Lieske Part No.: 262693

NIEDAX - Manufacturer: B 18 AL
Hammerfoot-clamp with pressure trough and screw according to DIN EN ISO 1207, all aluminum, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter sink (GW. ..) must be ordered separately .

Occupancy: 1 cable

for cable diameter: 14 - 18 mm

NIEDAX model no. B 18 AL Type: B18AL


Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 179314

NIEDAX - Manufacturer: B 18 E3
hammer Foot-clamp with pressure trough, completely made ​​of stainless steel, material no 1.4301, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter sink (GW. ..) must be ordered separately.

Occupancy: 1 cable

for cable diameter: 14 - 18 mm

NIEDAX model no B 18 E3 Type: B18E3


Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 161213

Hammer foot clamp, with strip-galvanized steel pressure pan according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter pans (GW/GWS...) and double pans (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 3 cables for cable Ø: 18 - 20 mm
Sales unit: 100 pieces
Lieske Part No.: 783468

NIEDAX - Manufacturer: B 22 Hammerfoot-clamp, pressure trough in galvanized steel according to DIN EN
346, Hammerfußbügel dip galvanized to DIN EN ISO
46
, Suitable for NIEDAX anchor channels with 297 -298
6 -
7 mm slot width, counter sink (GW / GWS ...) must be ordered separately. For use in the functional integrity please follow additional rules! Occupancy:
Cable for cable diameter:
8 - 22 mm NIEDAX Model No.: B 22 Type: B22 sales unit.
ST.
Sales unit: 100 pieces
Lieske Part No.: 983724

NIEDAX - Manufacturer: B 22/2
Hammerfoot-clamp, pressure trough in galvanized steel according to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter trays (GW / GWS ... ) and dual sinks (DW. ..) must be ordered separately. For use in the functional integrity please additive regulations! occupancy above the other 2 cables for cable diameters 18 - 22 mm NIEDAX Model No.: B 22 / 2nd Type: B22 / 2








Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 636686

NIEDAX - Manufacturer: B 22/2 AL
Hammerfoot-clamp with pressure trough and screw according to DIN EN ISO 1207, all aluminum, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter trays (GW. ..) and dual sinks (DW. ..) must be ordered separately are.

Occupancy over each other: 2 cable

for cable diameters 18 - 22 mm

NIEDAX model no. B 22/2 AL

Type: B22/2AL
Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 385482

NIEDAX - Manufacturer: B 22/2 E3
Hammerfoot-clamp with pressure trough, completely made of stainless steel, material no. 1.4301, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter trays (GW. ..) and dual sinks (DW. ..) must be ordered separately.

Occupancy over each other: 2 cable

for cable diameters 20 - 22 mm

NIEDAX model no. B 22/2 E3

Type: B22/2E3
Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 390257

Hammer foot clamp, with strip-galvanized steel pressure pan according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter pans (GW/GWS...) and double pans (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 3 cables for cable Ø: 20 - 22 mm
Sales unit: 100 pieces
Lieske Part No.: 814474

NIEDAX - Manufacturer: B 22 AL
Hammerfoot-clamp with pressure trough and screw according to DIN EN ISO 1207, all aluminum, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter sink (GW. ..) must be ordered separately.

Occupancy: 1 cable

for cable diameters 18 - 22 mm

NIEDAX model no. B 22 AL

Type: B22AL
Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 444180

NIEDAX - Manufacturer: B 22 E3 Hammerfoot-clamp with pressure trough, completely made of stainless steel, material no.
.43
, Suitable for NIEDAX anchor channels with 297 -298
6 -
7 mm slot width, counter sink (GW. ..) must be ordered separately. Occupancy:
Cable for cable diameter:
8 - 22 mm NIEDAX Model No.: B 22 E3 Type: B22E3 item.
ST.
Sales unit: 100 pieces
Lieske Part No.: 882307

Hammer foot clamp, with strip-galvanized steel pressure pan according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor channels 2970-2980 with 16-17 mm slot width, counter pans (GW/GWS...) and double pans (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 3 cables for cable Ø: 22 - 24 mm
Sales unit: 100 pieces
Lieske Part No.: 379363

NIEDAX - Manufacturer: B 26
Hammerfoot-clamp, pressure trough in galvanized steel according to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter trays (GW / GWS ...) must be ordered separately. For use in the functional integrity please follow additional rules!

Occupancy: 1 cable

for cable diameters 22 - 26 mm

NIEDAX model no. B 26 Type: B26


Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 376383

Hammer foot clamp, with strip-galvanized steel pressure pan according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor channels 2970-2980 with 16-17 mm slot width, counter pans (GW/GWS...) and double pans (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 2 cables for cable Ø: 22 - 26 mm
Sales unit: 100 pieces
Lieske Part No.: 690895

NIEDAX - Manufacturer: B 26/2 AL Hammerfoot-clamp with pressure trough and screw according to DIN EN ISO
2 7, all-aluminum, suitable for NIEDAX anchor channels with 297 -298
6 -
7 mm slot width, counter trays (GW. ..) and dual sinks (DW. ..) must be ordered separately. Occupancy above the other 2 cables for cable diameters 22 - 26 mm NIEDAX model no. B 26/2 AL Type: B26/2AL item:
ST.
Sales unit: 100 pieces
Lieske Part No.: 532796

NIEDAX - Manufacturer: B 26/2 E3
Hammerfoot-clamp with pressure trough, completely made of stainless steel, material no. 1.4301, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter trays (GW. ..) and dual sinks (DW. ..) must be ordered separately.

Occupancy over each other: 2 cable

for cable diameter: 24 - 26 mm NIEDAX Model No.: B 26/2 E3. Type: B26/2E3




Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 464035

Hammer foot clamp, with strip-galvanized steel pressure pan according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter pans (GW/GWS...) and double pans (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 3 cables for cable Ø: 24 - 26 mm
Sales unit: 100 pieces
Lieske Part No.: 398488