Pipe and cable spacing clamp, with long fastening hole, for cables and electrical installation pipes in accordance with DIN EN 61386-21, for screwing on with push-through anchor DAM 6X... or screw anchor NSA 6X.../FKK-T30. Dimensions (approx. dimensions) W x L : 14 x 59 mm Long fastening hole : 6.4 x 10 mm for cable Ø : 24 - 29 mm for metric electrical installation pipes in accordance with DIN EN 60423 : M 25 Material : Steel, strip galvanized in accordance with DIN EN 10346 Screw material : Steel, electrogalvanized in accordance with DIN EN ISO 4042 Niedax model no. : 853
Lieske Part No.: 418838

NIEDAX - Make: AL 853 pipe and cable clamp spacing, aluminum, screws in stainless steel, with slotted fixing holes for Pg and metric pipes according to DIN EN 423 6 Long hole: 5.6 x 8 mm for cable diameter: 24 - 29 mm for conduit threads: Pg 2
for metric Rohrgr. NIEDAX M 25 model no. 853 AL Type: 853AL item:
ST.
Sales unit: 50 pieces
Lieske Part No.: 546376

Pipe and cable spacing clamp, with long fastening hole, for cables and electrical installation pipes in accordance with DIN EN 61386-21, for screwing on with push-through anchor DAM 6X... or screw anchor NSA 6X.../FKK-T30. Dimensions (approx. dimensions) W x L : 14 x 59 mm Long fastening hole : 6.4 x 10 mm for cable Ø : 24 - 29 mm for metric electrical installation pipes in accordance with DIN EN 60423 : M 25 Material : Steel, hot-dip galvanized in accordance with DIN EN ISO 1461 Screw material : Stainless steel, material no. 1.4301, 1.4303 Niedax model no. : 853 F
Sales unit: 50 pieces
Lieske Part No.: 1323231

Pipe and cable spacer clamp, with internal connection thread M 6, for cables and electrical installation pipes in accordance with DIN EN 61386-21, when mounting on push-through anchor DAM 6X... or screw anchor NSA 6X55/SW10-M6, care must be taken that the connection thread of the push-through anchor does not protrude into the cable's clamping space, for screwing onto screw dowels with a thread length of up to 8 mm. For use in functional maintenance, please observe additional regulations! Dimensions (approx. dimensions) W x L : 14 x 59 mm Internal connection thread : M 6 for cable Ø : 24 - 29 mm for metric electrical installation pipes in accordance with DIN EN 60423 : M 25 Material : Steel, strip galvanized in accordance with DIN EN 10346 Screw material : Steel, electrogalvanized in accordance with DIN EN ISO 4042 Niedax model no. : 853 G
Sales unit: 50 pieces
Lieske Part No.: 1426287

Pipe and cable spacer clamp, with internal connection thread M 6, for cables and electrical installation pipes in accordance with DIN EN 61386-21, when mounting on push-through anchor DAM 6X... or screw anchor NSA 6X55/SW10-M6, care must be taken that the connection thread of the push-through anchor does not protrude into the cable's clamping space, for screwing onto screw dowels with a thread length of up to 8 mm. For use in functional maintenance, please observe additional regulations! Dimensions (approx. dimensions) W x L : 14 x 59 mm Internal connection thread : M 6 for cable Ø : 24 - 29 mm for metric electrical installation pipes in accordance with DIN EN 60423 : M 25 Material : stainless steel, material no. 1.4571 Screw material : stainless steel, material no. 1.4571 Niedax model no. : 853 G E5
Sales unit: 500 pieces
Lieske Part No.: 1322961

NIEDAX - Make: 854
Pipe and cable clamp distance from galvanized steel strip galvanized to DIN EN 10346, DIN ISO 4042 screws with slotted fixing holes for Pg and metric pipes according to DIN EN 60423rd

Long hole: 6.4 x 10 mm

for cable diameters 29 - 38 mm

for conduit threads: Pg 29

for metric Rohrgr. M 32

NIEDAX model no. 854

Type: 854
Quantity: 1 unit.
Lieske Part No.: 303938

NIEDAX - Make: AL 854
Pipe and cable clamp spacing, aluminum, screws in stainless steel, with slotted fixing holes for Pg and metric pipes according to DIN EN 60423rd

Long hole: 6.4 x 10 mm

for cable diameters 29 - 38 mm

for conduit threads: Pg 29

for metric Rohrgr. M 32

NIEDAX model no. 854 AL

Type: 854AL
Quantity: 1 unit.
Sales unit: 25 pieces
Lieske Part No.: 109686

NIEDAX - Make: 854 G
Pipe and cable clamp distance from galvanized steel strip galvanized to DIN EN 10346, screws to DIN ISO 4042, with internal thread connection M 6, for Pg and metric pipes according to DIN EN 60423rd

for cable diameters 29 - 38 mm

for conduit threads: Pg 29

for metric Rohrgr. M 32

NIEDAX model no. 854 G

Type: 854g
Item: 100 ST.
Sales unit: 25 pieces
Lieske Part No.: 475212

Pipe and cable spacer clamp, with internal connection thread M 6, for cables and electrical installation pipes in accordance with DIN EN 61386-21, when mounting on push-through anchor DAM 6X... or screw anchor NSA 6X55/SW10-M6, care must be taken that the connection thread of the push-through anchor does not protrude into the cable's clamping space, for screwing onto screw dowels with a thread length of up to 8 mm. Please observe additional regulations for use in functional maintenance! Dimensions (approx. dimensions) W x L : 16 x 69 mm Internal connection thread : M 6 for cable Ø : 29 - 38 mm for metric electrical installation pipes in accordance with DIN EN 60423 : M 32 Material : stainless steel, material no. 1.4571 Screw material : stainless steel, material no. 1.4571 Niedax model no. : 854 G E5
Sales unit: 25 pieces
Lieske Part No.: 466974

NIEDAX - Make: 855 ​​pipe and cable clamp distance from steel strip galvanized to DIN EN
346 galvanized, 4 screws to DIN ISO 42, with elongated mounting holes for Pg and metric pipes according to DIN EN 423 6 Long hole: 6.4 x
mm for cable diameter 38 - 47 mm for conduit threads. Pg 36 for metric Rohrgr: NIEDAX M 4 Model No: 855 Type: 855 sales unit.
ST.
Sales unit: 20 pieces
Lieske Part No.: 986234

NIEDAX - Make: 855 ​​AL
pipe and cable mount bracket, aluminum, screws in stainless steel, with slotted fixing holes for Pg and metric pipes according to EN 60423rd slot: 6.4 x 10 mm for cable diameters 38 - 47 mm for conduit threads: Pg 36 for metric Rohrgr. M 40 NIEDAX model no. 855 AL Type: 855AL












Quantity: 1 unit.
Sales unit: 20 pieces
Lieske Part No.: 679463

NIEDAX - Make: 855 G
Pipe and cable clamp distance from galvanized steel strip galvanized to DIN EN 10346, screws to DIN ISO 4042, with internal thread connection M 6, for Pg and metric pipes according to DIN EN 60423rd

for cable diameters 38 - 47 mm

for conduit threads: Pg 36

for metric Rohrgr. M 40

NIEDAX model no. 855 G

Type: 855g
Item: 100 ST.
Sales unit: 20 pieces
Lieske Part No.: 181153

Pipe and cable spacer clamp, with internal connection thread M 6, for cables and electrical installation pipes in accordance with DIN EN 61386-21, when mounting on push-through anchor DAM 6X... or screw anchor NSA 6X55/SW10-M6, care must be taken that the connection thread of the push-through anchor does not protrude into the cable's clamping space, for screwing onto screw dowels with a thread length of up to 8 mm. For use in functional maintenance, please observe additional regulations! Dimensions (approx. dimensions) W x L : 16 x 79.5 mm Internal connection thread : M 6 for cable Ø : 38 - 47 mm for metric electrical installation pipes in accordance with DIN EN 60423 : M 40 Material : stainless steel, material no. 1.4571 Screw material : stainless steel, material no. 1.4571 Niedax model no. : 855 G E5
Sales unit: 20 pieces
Lieske Part No.: 218411

Pipe and cable spacing clamp, with long fastening hole, for cables and electrical installation pipes in accordance with DIN EN 61386-21, for screwing on with push-through anchor DAM 6X... or screw anchor NSA 6X.../FKK-T30. Dimensions (approx. dimensions) W x L : 18 x 89 mm Long fastening hole : 6.4 x 10 mm for cable Ø : 47 - 55 mm for metric electrical installation pipes in accordance with DIN EN 60423 : M 50 Material : Steel, strip galvanized in accordance with DIN EN 10346 Screw material : Steel, electrogalvanized in accordance with DIN EN ISO 4042 Niedax model no. : 856
Sales unit: 20 pieces
Lieske Part No.: 532823

NIEDAX - Make: AL 856
Pipe and cable clamp spacing, aluminum, screws in stainless steel, with slotted fixing holes for Pg and metric pipes according to DIN EN 60423rd

Long hole: 6.4 x 10 mm

for cable diameter: 47 - 55 mm

for conduit threads: Pg 42

for metric Rohrgr. M 50

NIEDAX model no. 856 AL

Type: 856AL
Quantity: 1 unit.
Sales unit: 20 pieces
Lieske Part No.: 128509

NIEDAX - Make: 856 G
Pipe and cable clamp distance from galvanized steel strip galvanized to DIN EN 10346, screws to DIN ISO 4042, with internal thread connection M 6, for Pg and metric pipes according to DIN EN 60423rd

for cable diameter: 47 - 55 mm

for conduit threads: Pg 42

for metric Rohrgr. M 50

NIEDAX model no. 856 G

Type: 856g
Item: 100 ST.
Sales unit: 20 pieces
Lieske Part No.: 453650

Pipe and cable spacer clamp, with internal connection thread M 6, for cables and electrical installation pipes in accordance with DIN EN 61386-21, when mounting on push-through anchor DAM 6X... or screw anchor NSA 6X55/SW10-M6, care must be taken that the connection thread of the push-through anchor does not protrude into the cable's clamping space, for screwing onto screw dowels with a thread length of up to 8 mm. Please observe additional regulations for use in functional maintenance! Dimensions (approx. dimensions) W x L : 18 x 89 mm Internal connection thread : M 6 for cable Ø : 47 - 55 mm for metric electrical installation pipes in accordance with DIN EN 60423 : M 50 Material : stainless steel, material no. 1.4571 Screw material : stainless steel, material no. 1.4571 Niedax model no. : 856 G E5
Sales unit: 20 pieces
Lieske Part No.: 218410

Pipe and cable spacing clamp, with long fastening hole, for cables and electrical installation pipes in accordance with DIN EN 61386-21, for screwing on with push-through anchor DAM 6X... or screw anchor NSA 6X.../FKK-T30. Dimensions (approx. dimensions) W x L : 18 x 100 mm Long fastening hole : 6.4 x 10 mm for cable Ø : 55 - 63 mm for metric electrical installation pipes in accordance with DIN EN 60423 : M 63 Material : Steel, strip galvanized in accordance with DIN EN 10346 Screw material : Steel, electrogalvanized in accordance with DIN EN ISO 4042 Niedax model no. : 857
Sales unit: 20 pieces
Lieske Part No.: 733700

NIEDAX - Make: AL 857
pipe and cable clamp spacing, aluminum, screws in stainless steel, with slotted fixing holes for Pg and metric pipes according to DIN EN 60423rd

Long hole: 6.4 x 10 mm

for cable diameters 55 - 63 mm for conduit threads: Pg 48 . Rohrgr for metric: M 63 . NIEDAX Model No.: 857 AL Type: 857AL








Quantity: 1 unit.
Sales unit: 20 pieces
Lieske Part No.: 429319

NIEDAX - Make: 857 G
pipe and cable spacer clip from strip galvanized steel galvanized to DIN EN 10346, screws to DIN ISO 4042, with connection internal thread M 6, for Pg and metric pipes according to DIN EN 60423rd for cable diameters 55 - 63 mm for conduit threads: Pg 48 for metric Rohrgr. M63 NIEDAX model no. 857 G Type: 857g










Item: 100 ST.
Sales unit: 20 pieces
Lieske Part No.: 152699

Pipe and cable spacer clamp, with internal connection thread M 6, for cables and electrical installation pipes in accordance with DIN EN 61386-21, when mounting on push-through anchor DAM 6X... or screw anchor NSA 6X55/SW10-M6, care must be taken that the connection thread of the push-through anchor does not protrude into the cable's clamping space, for screwing onto screw dowels with a thread length of up to 8 mm. For use in functional maintenance, please observe additional regulations! Dimensions (approx. dimensions) W x L : 18 x 100 mm Internal connection thread : M 6 for cable Ø : 55 - 63 mm for metric electrical installation pipes in accordance with DIN EN 60423 : M 63 Material : stainless steel, material no. 1.4571 Screw material : stainless steel, material no. 1.4571 Niedax model no. : 857 G E5
Sales unit: 20 pieces
Lieske Part No.: 1322976

E-clips, flange claw with pipe clip, for striking with a hammer on various support flanges, pipe clip on flange claw can be rotated, for pipe suspension. Dimensions (approx. dimensions) for flange thickness T: 14 - 20 mm Impact depth B: 26.6 mm for pipe Ø: 19 - 26 mm Load capacity F: 0.12 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 230522

E-clips, flange claw with pipe clip, for striking with a hammer on various support flanges, pipe clip on flange claw can be rotated, for pipe suspension. Dimensions (approx. dimensions) for flange thickness T: 3 - 8 mm Impact depth B: 20.3 mm for pipe Ø: 19 - 26 mm Load capacity F: 0.12 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 230546

E-clips, flange claw with pipe clip, for striking with a hammer on various support flanges, pipe clip on flange claw can be rotated, for pipe suspension. Dimensions (approx. dimensions) for flange thickness T: 8 - 14 mm Impact depth B: 20.3 mm for pipe Ø: 19 - 26 mm Load capacity F: 0.12 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 25 pieces
Lieske Part No.: 230533

Hammer foot clamp, with strip-galvanized steel pressure tray in accordance with DIN EN 10346, hammer foot clamp hot-dip galvanized in accordance with DIN EN ISO 1461, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter tray (GW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Assignment: 1 cable for cable Ø: 90 - 100 mm
Sales unit: 25 pieces
Lieske Part No.: 367955

Hammer foot clamp, with strip-galvanized steel pressure tray in accordance with DIN EN 10346, hammer foot clamp hot-dip galvanized in accordance with DIN EN ISO 1461, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter tray (GW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Assignment: 1 cable for cable Ø: 100 - 110 mm
Sales unit: 25 pieces
Lieske Part No.: 982105

NIEDAX - Manufacturer: B 12
Foot hammer-clamp, pressure trough in galvanized steel accor ding to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter sink (GW. ..) must be ordered separately are. For use in the functional integrity please follow additional rules!

Occupancy: 1 cable

for cable diameter 6 - 12 mm . NIEDAX Model No.: B 12th Type: B12




Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 684676

Hammer foot clamp, with strip-galvanized steel pressure pan according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter pans (GW...) and double pans (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 2 cables for cable Ø: 10 - 12 mm
Sales unit: 100 pieces
Lieske Part No.: 715792

Hammer foot clamp, with strip-galvanized steel pressure pan according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter pans (GW...) and double pans (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 3 cables for cable Ø: 9 - 12 mm
Sales unit: 100 pieces
Lieske Part No.: 316684

NIEDAX - Manufacturer: B 14
Hammerfoot-clamp, pressure trough in galvanized steel according to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter sink (GW / GWS ...) must be ordered separately. For use in the functional integrity please follow additional rules!

Occupancy: 1 cable

for cable diameters 10 - 14 mm

NIEDAX model no. B 14

Type: B14
Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 601528

Hammer foot clamp, with strip-galvanized steel pressure pan according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor channels 2970-2980 with 16-17 mm slot width, counter pans (GW/GWS...) and double pans (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 2 cables for cable Ø: 12 - 14 mm
Sales unit: 100 pieces
Lieske Part No.: 686266

Hammer foot clamp, with pressure tray and screw according to DIN EN ISO 1207, made entirely of aluminum, suitable for Niedax anchor rails 2970-2980 with 16-17 mm slot width, counter trays (GW...) and double trays (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 12 - 14 mm
Sales unit: 100 pieces
Lieske Part No.: 202779

NIEDAX - Manufacturer: B 14/2 E3
Hammerfoot-clamp with pressure trough, completely made ​​of stainless steel, material no. 1.4301, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter trays (GW. ..) and dual sinks (DW. ..) must be ordered separately. occupancy above the other 2 cables for cable diameters 12 - 14 mm NIEDAX model No.:. B 14/2 E3 Type: B14/2E3








Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 556878

Hammer foot clamp, with strip-galvanized steel pressure pan according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter pans (GW/GWS...) and double pans (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 3 cables for cable Ø: 12 - 14 mm
Sales unit: 100 pieces
Lieske Part No.: 548578

NIEDAX - Manufacturer: B 14 AL
Hammerfoot-clamp with pressure trough and screw according to DIN EN ISO 1207, all aluminum, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter sink (GW. ..) must be ordered separately .

Occupancy: 1 cable

for cable diameters 10 - 14 mm

NIEDAX model no. B 14 AL Type: B14AL


Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 625783

NIEDAX - Manufacturer: B 14 E3
Hammerfoot-clamp with pressure trough, completely made ​​of stainless steel, material no. 1.4301, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter sink (GW. ..) must be ordered separately.

Occupancy: 1 cable

for cable diameters 10 - 14 mm NIEDAX model no. B 14 E3 Type: B14E3




Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 156155

NIEDAX - Manufacturer: B 16
Hammerfoot-clamp, pressure trough in galvanized steel according to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter sink (GW / GWS ...) must be ordered separately. For use in the functional integrity please follow additional rules!

Occupancy: 1 cable

for cable diameters 12 - 16 mm

NIEDAX model no. B 16

Type: B16
Quantity: 1 unit.
Lieske Part No.: 310270

Hammer foot clamp, with strip-galvanized steel pressure pan according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor channels 2970-2980 with 16-17 mm slot width, counter pans (GW/GWS...) and double pans (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 2 cables for cable Ø: 14 - 16 mm
Sales unit: 100 pieces
Lieske Part No.: 570205

Hammer foot clamp, with strip-galvanized steel pressure pan according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter pans (GW/GWS...) and double pans (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 3 cables for cable Ø: 14 - 16 mm
Sales unit: 100 pieces
Lieske Part No.: 925836

NIEDAX - Manufacturer: B 18
Hammerfoot-clamp, pressure trough in galvanized steel according to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter sink (GW / GWS ...) must be ordered separately. For use in the functional integrity please follow additional rules!

Occupancy: 1 cable

for cable diameter: 14 - 18 mm

NIEDAX model no. B 18 Type: B18


Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 365107

Hammer foot clamp, with strip-galvanized steel pressure pan according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor channels 2970-2980 with 16-17 mm slot width, counter pans (GW/GWS...) and double pans (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 2 cables for cable Ø: 16 - 18 mm
Sales unit: 100 pieces
Lieske Part No.: 318804

Hammer foot clamp, with pressure tray and screw according to DIN EN ISO 1207, made entirely of aluminum, suitable for Niedax anchor rails 2970-2980 with 16-17 mm slot width, counter trays (GW...) and double trays (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 14 - 18 mm
Sales unit: 100 pieces
Lieske Part No.: 173159

NIEDAX - Manufacturer: B 18/2 E3
Hammerfoot-clamp with pressure trough, completely made of stainless steel, material no. 1.4301, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter trays (GW. ..) and dual sinks (DW. ..) must be ordered separately.

Occupancy over each other: 2 cable

for cable diameter: 16 - 18 mm

NIEDAX model no. B 18/2 E3

Type: B18/2E3
Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 698779

Hammer foot clamp, with strip-galvanized steel pressure pan according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor channels 2970-2980 with 16-17 mm slot width, counter pans (GW/GWS...) and double pans (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 3 cables for cable Ø: 16 - 18 mm
Sales unit: 100 pieces
Lieske Part No.: 262693

NIEDAX - Manufacturer: B 18 AL
Hammerfoot-clamp with pressure trough and screw according to DIN EN ISO 1207, all aluminum, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter sink (GW. ..) must be ordered separately .

Occupancy: 1 cable

for cable diameter: 14 - 18 mm

NIEDAX model no. B 18 AL Type: B18AL


Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 179314

NIEDAX - Manufacturer: B 18 E3
hammer Foot-clamp with pressure trough, completely made ​​of stainless steel, material no 1.4301, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter sink (GW. ..) must be ordered separately.

Occupancy: 1 cable

for cable diameter: 14 - 18 mm

NIEDAX model no B 18 E3 Type: B18E3


Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 161213

Hammer foot clamp, with strip-galvanized steel pressure pan according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter pans (GW/GWS...) and double pans (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 3 cables for cable Ø: 18 - 20 mm
Sales unit: 100 pieces
Lieske Part No.: 783468

NIEDAX - Manufacturer: B 22 Hammerfoot-clamp, pressure trough in galvanized steel according to DIN EN
346, Hammerfußbügel dip galvanized to DIN EN ISO
46
, Suitable for NIEDAX anchor channels with 297 -298
6 -
7 mm slot width, counter sink (GW / GWS ...) must be ordered separately. For use in the functional integrity please follow additional rules! Occupancy:
Cable for cable diameter:
8 - 22 mm NIEDAX Model No.: B 22 Type: B22 sales unit.
ST.
Sales unit: 100 pieces
Lieske Part No.: 983724

NIEDAX - Manufacturer: B 22/2
Hammerfoot-clamp, pressure trough in galvanized steel according to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter trays (GW / GWS ... ) and dual sinks (DW. ..) must be ordered separately. For use in the functional integrity please additive regulations! occupancy above the other 2 cables for cable diameters 18 - 22 mm NIEDAX Model No.: B 22 / 2nd Type: B22 / 2








Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 636686

NIEDAX - Manufacturer: B 22/2 AL
Hammerfoot-clamp with pressure trough and screw according to DIN EN ISO 1207, all aluminum, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter trays (GW. ..) and dual sinks (DW. ..) must be ordered separately are.

Occupancy over each other: 2 cable

for cable diameters 18 - 22 mm

NIEDAX model no. B 22/2 AL

Type: B22/2AL
Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 385482