Blitz-Iso clamps: Plastic clamp with metal insert, therefore also suitable for heavy-duty use, metal parts made of steel, galvanized.
Can be screwed onto M6 thread.
*Sizes 6-12 and 10-17 not suitable for bolt setting tools.
Sales unit: 25 pieces
Lieske Part No.: 614368

Blitz-Iso clamps: Plastic clamp with metal insert, therefore also suitable for heavy-duty use, metal parts made of steel, galvanized.
Can be screwed onto M6 thread.
*Sizes 6-12 and 10-17 not suitable for bolt setting tools.
Sales unit: 25 pieces
Lieske Part No.: 1426036

Easy-fit clip
The plug clamps are used when installing
Cables and pipes on walls and ceilings and
installation of flexible pipes on concrete
and in the floor.


Simply plug the clamps instead of nail clips in concrete and aerated concrete.
The advantage of the push-fit clips is that they are only in the borehole
must be inserted. It eliminates the use of anchors and
Screws.
Drill diameter: 6 mm
Hole depth: 35 or 40 mm
Material: polyamide PA 6, light gray RAL 7035
Clamping range: 16-23 mm

Type: 1974/23
Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 240285

The clip clamps are used for laying cables and pipes on walls and ceilings and for laying flexible pipes on concrete and in screed. The single clip clamps replace nail clips in concrete and aerated concrete. The advantage of the clip clamps is that they only have to be inserted into the drill hole. There is no need to use dowels and screws.
Sales unit: 100 pieces
Lieske Part No.: 677856

The double-fit clip-on clips are used for laying cables and pipes on walls and ceiling and the installation of flexible pipes on concrete and screed. The double push-fit clips instead of nail clips in concrete and aerated concrete. The advantage of the push-fit clips is that they have to be pushed into the wellbore. It eliminates the use of screws and plugs. Drill diameter: 6 mm Hole Depth: 35 mm and 4 mm Material: PA 6 polyamide, light gray RAL 7 35 Clamping range: 4 -
2 mm Type:
974/2X
2 Quantity:
ST.
Sales unit: 100 pieces
Lieske Part No.: 868174

The double-fit clip-on clips are used for laying cables and pipes on walls and ceiling and the installation of flexible pipes on concrete and screed. The double push-fit clips instead of nail clips in concrete and aerated concrete. The advantage of the push-fit clips is that they have to be pushed into the wellbore. It eliminates the use of screws and plugs. Drill diameter: 6 mm Hole Depth: 35 mm and 4 mm Material: PA 6 polyamide, light gray RAL 7 35 Clamping range:
2-25 mm Type:
974/2X25 item:
ST.
Sales unit: 100 pieces
Lieske Part No.: 866564

Cable clamp metal
Excellent eeigent for use in suspended ceilings because:
- High heat resistance
- No problems with halogens in case of fire
- No fire load
- Terminal height 10 mm
- Mounting hole Ø 6 mm
Version: for max. 16 conductors NYM 3 x 1.5 mm ²

Type: 2033M
Quantity: 1 unit.
Sales unit: 25 pieces
Lieske Part No.: 191336

The metal cable clamp is halogen-free and fire-load-free and offers high mechanical stability even in the event of a fire. The cable clamp is approved as a cable-specific variant for electrical functional integrity in accordance with DIN 4102 Part 12. The spacer 2033 D 15 x 3 G (order separately) increases the clamping height of cable clamps from 10 to 13 mm. The cable clamp is suitable for fire-safe installation above suspended fire protection ceilings in accordance with DIN 4102.
Sales unit: 50 pieces
Lieske Part No.: 104704

With molded plug dowel 6 mm Ø.
Sales unit: 25 pieces
Lieske Part No.: 390350

OBO cable clips 2 32 for max. 8 conductors NYM 3 x
, 5 2 33 mm ² for max.
6 conductors NYM 3 x
, 5 2 34 mm ² for max. 8 conductors NYM 3 x
, 5 mm ² 2 to 2 32/SD 34/SD with pre-shock OBO plug 6 mm, required hole depth 5 mm Type: 2 32SD
25MM Quantity:
ST.
Sales unit: 50 pieces
Lieske Part No.: 808090

OBO cable clamps
2032 for max. 8 conductors NYM 3 x 1.5 mm ²
2033 max. 16 conductors NYM 3 x 1.5 mm ²
2034 for max. 8 conductors NYM 3 x 1.5 mm ²
2032/SD to 2034/SD
with pre-shock OBO plug 6 mm, required
Hole depth 50 mm

Type: 2033SD 220MM
Quantity: 1 unit.
Sales unit: 25 pieces
Lieske Part No.: 595608

With pre-assembled impact dowel 6 mm Ø.
Required drill hole depth 50 mm.
Clamping height 9 mm, with spacer 13 mm.
Mounting hole 6 mm Ø.
Sales unit: 100 pieces
Lieske Part No.: 951873

With pre-assembled impact dowel 6 mm Ø.
Required drill hole depth 50 mm.
Clamping height 9 mm, with spacer 13 mm.
Mounting hole 6 mm Ø.
Sales unit: 100 pieces
Lieske Part No.: 234083

OBO cable clamps
for max 2032. 8 conductors NYM 3 x 1.5 mm ²
max 2033. 16 conductors NYM 3 x 1.5 mm ²
2034 for max. 8 conductors NYM 3 x 1.5 mm ²
2032 F to 2034 F
specifically for use in suspended ceilings,
flame retardant according to VDE 0471/DIN IEC 695 Part 2 -
1, test temperature 960 ° C, L or according to UL 94
. halogen-free Color stone gray RAL 7030 Type: 2032F 125MM





Item: 50 ST.
Sales unit: 50 pieces
Lieske Part No.: 295335

OBO cable clamps
2032 for max. 8 conductors NYM 3 x 1.5 mm ²
2033 max. 16 conductors NYM 3 x 1.5 mm ²
2034 for max. 8 conductors NYM 3 x 1.5 mm ²
2032 F to 2034 F
specifically for use in suspended ceilings,
flame retardant according to VDE 0471/DIN IEC 695 Part 2 -
1, test temperature 960 ° C, or VO according to UL 94
halogen free. Colour Stone gray RAL 7030 Type: 2033F 220MM





Quantity: 1 unit.
Sales unit: 25 pieces
Lieske Part No.: 676166

OBO cable clamps
2032 for max. 8 conductors NYM 3 x 1.5 mm ²
2033 max. 16 conductors NYM 3 x 1.5 mm ²
2034 for max. 8 conductors NYM 3 x 1.5 mm ²
2032 F to 2034 F
especially for use in ceilings,
flame retardant according to VDE 0471/DIN IEC 695 Part 2 -
1, test temperature 960 ° C, or VO to UL 94,
halogen-free.


Color stone gray RAL 7030

Type: 2034F 140MM
Item: 50 ST.
Sales unit: 50 pieces
Lieske Part No.: 414958

Standard version for general applications, such as suspended ceilings and
partition wall installations.
Clamping height 9 mm, with spacer 13 mm.
Mounting hole 6 mm Ø.
Sales unit: 100 pieces
Lieske Part No.: 327408

Standard version for general applications, such as suspended ceilings and
partition wall installations.
Clamping height 9 mm, with spacer 13 mm.
Mounting hole 6 mm Ø.
Sales unit: 100 pieces
Lieske Part No.: 315989

Standard version for general applications, such as suspended ceilings and
partition wall installations.
Clamping height 9 mm, with spacer 13 mm.
Mounting hole 6 mm Ø.
Sales unit: 100 pieces
Lieske Part No.: 242438

OBO cable clips 2 32 for max. 8 conductors NYM 3 x
, 5 2 33 mm ² for max.
6 conductors NYM 3 x
, 5 2 34 mm ² for max. 8 conductors NYM 3 x
, 5 mm ² 2 32-2 34 standard version for general use, halogen-free. Clamping height 9 mm with spacer
3 mm, 6 mm mounting hole Type: 2 32
25MM Quantity:
ST.
Sales unit: 50 pieces
Lieske Part No.: 992227

OBO cable clamps
for max 2032. 8 conductors NYM 3 x 1.5 mm ²
max 2033. 16 conductors NYM 3 x 1.5 mm ²
for max 2034. 8 conductors NYM 3 x 1.5 mm ²
2032-2034
. standard version for general use, halogen-free
Clamping height 9 mm with spacer 13 mm, 6 mm mounting hole Type: 2033 220MM


Quantity: 1 unit.
Sales unit: 25 pieces
Lieske Part No.: 566998

OBO cable clamps
2032 for max. 8 conductors NYM 3 x 1.5 mm ²
2033 max. 16 conductors NYM 3 x 1.5 mm ²
2034 for max. 8 conductors NYM 3 x 1.5 mm ²
2032 to 2034
Standard version for general use, halogen-free.
Clamping height 9 mm with spacer 13 mm, Mounting Hole 6 mm

Type: 2034 140MM
Quantity: 1 unit.
Sales unit: 50 pieces
Lieske Part No.: 435599

Designed to be used with gas pressure nailers (e.g. SPIT), e.g. for use in suspended ceilings and partition wall installations.
Clamping height 9 mm, with spacer 13 mm.
Mounting hole 7 mm Ø.
Sales unit: 50 pieces
Lieske Part No.: 225762

Designed to be used for attaching gas pressure nailers (e.g. SPIT), e.g. for use in suspended ceilings and partition wall installations.
Clamping height 9 mm - with spacer 13 mm.
Mounting hole 7 mm Ø.
Sales unit: 25 pieces
Lieske Part No.: 349089

Designed to be used for attaching gas pressure nailers (e.g. SPIT), e.g. for use in suspended ceilings and partition wall installations.
Clamping height 9 mm - with spacer 13 mm.
Mounting hole 7 mm Ø.
Sales unit: 50 pieces
Lieske Part No.: 677552

Spacer
2033 D
to increase the clamping height of 9 to 13 mm for thicker cables, halogen-free Type: 2033D


Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 338298

Collective bracket for general use with 6 mm Ø mounting holes, suitable for wall and ceiling mounting. The molded fastening element can be attached using a knock-in dowel or gas pressure nailer. The recommended mounting distance when fully occupied is 50-60 cm.
Sales unit: 50 pieces
Lieske Part No.: 1775899

Collective bracket for general use with 6 mm Ø mounting holes, suitable for wall and ceiling mounting. The molded fastening element can be attached using a knock-in dowel or gas pressure nailer. The recommended mounting distance when fully occupied is 50-60 cm.
Sales unit: 100 pieces
Lieske Part No.: 1775898

Collective bracket for general use with 6 mm Ø mounting holes, suitable for wall and ceiling mounting. The molded-on fastening element can be attached with a knock-in dowel or gas pressure nailer. Stone gray design, flame-retardant according to DIN VDE 0471/DIN IEC 695 Part 2-1, test temperature 960°C. The recommended mounting distance when fully occupied is 50-60 cm.
Lieske Part No.: 1056097

Collective bracket for general use with 6 mm Ø mounting holes, suitable for wall and ceiling mounting. The molded-on fastening element can be attached using a knock-in dowel or gas pressure nailer. The recommended mounting distance when fully occupied is 250 - 400 mm.
Sales unit: 50 pieces
Lieske Part No.: 348469

Collective bracket for general use with 6 mm Ø mounting holes, suitable for wall and ceiling mounting. The molded-on fastening element can be attached using a knock-in dowel or gas pressure nailer. The recommended mounting distance when fully occupied is 250 - 400 mm.
Lieske Part No.: 788042

Collective bracket for general use, suitable for wall and ceiling mounting. The molded fastening element can be attached with a hammer anchor or gas pressure nailer.
Stone gray design, flame-retardant according to DIN VDE 0471/DIN IEC 695 Part 2-1, test temperature 960°C. The recommended fastening distance when fully occupied is 250 - 400 mm.
Sales unit: 50 pieces
Lieske Part No.: 899636

Collective bracket for general use with 6 mm Ø mounting holes, suitable for wall and ceiling mounting. The molded-on fastening element can be attached using a knock-in dowel or gas pressure nailer. The recommended mounting distance when fully occupied is 250 - 400 mm.
Sales unit: 25 pieces
Lieske Part No.: 658423

Collective bracket for general use with 6 mm Ø mounting holes, suitable for wall and ceiling mounting. The molded-on fastening element can be attached using a knock-in dowel or gas pressure nailer. The recommended mounting distance when fully occupied is 250 - 400 mm.
Sales unit: 50 pieces
Lieske Part No.: 181419

Collective bracket for general use with 6 mm Ø mounting holes, suitable for wall and ceiling mounting. The molded-on fastening element can be attached with a knock-in dowel or gas pressure nailer. Stone gray design, flame-retardant according to DIN VDE 0471/DIN IEC 695 Part 2-1, test temperature 960°C. The recommended mounting distance when fully occupied is 250 - 400 mm.
Sales unit: 25 pieces
Lieske Part No.: 332694

OBO Grip M
sandverzinkt according to DIN EN 10147th Outstanding
suitable for use in intermediate
cover, as high heat resistance, no
Problems with halogens in case of fire, no
Fire load.

Capacity
2031 M/15 max. 15 conductors NYM 3 x 1.5 mm ²
2031 M/30 max. 30 conductors NYM 3 x 1.5 mm ²

Fastening holes 6 mm, application for integrity according to DIN
4102-12 possible, please ask for documents.

Materail: Steel
Color: light gray

Type: M/15 2031
Item: 50 ST.
Lieske Part No.: 484211

OBO Grip M
sandverzinkt according to DIN EN 10147th Outstanding
suitable for use in intermediate
cover, as high heat resistance, no
Problems with halogens in case of fire, no
Fire load.

Capacity
2031 M/15 max. 15 conductors NYM 3 x 1.5 mm ²
2031 M/30 max. 30 conductors NYM 3 x 1.5 mm ²

Fastening holes 6 mm, application for integrity according to DIN
4102-12 possible, please ask for documents.

Materail: Steel
Color: light gray

Type: M/30 2031
Item: 50 ST.
Lieske Part No.: 226670

Collective holder made of metal for high mechanical stability, even in the event of fire. Suitable for safe installation above fire protection ceilings. Also approved as a cable-specific variant for electrical functional integrity in accordance with DIN 4102 Part 12. For wall and ceiling mounting. Lock can be opened without tools.
Detailed information on the approved installation variants can be found in the corresponding test documents.
Lieske Part No.: 954131

Collective holder made of metal for high mechanical stability, even in the event of fire. Suitable for safe installation above fire protection ceilings. Also approved as a cable-specific variant for electrical functional integrity in accordance with DIN 4102 Part 12. For wall and ceiling mounting. Lock can be opened without tools.
Detailed information on the approved installation variants can be found in the corresponding test documents.
Sales unit: 50 pieces
Lieske Part No.: 785906

Collective holder made of metal for high mechanical stability, even in the event of fire. Suitable for safe installation above fire protection ceilings. Also approved as a cable-specific variant for electrical functional integrity in accordance with DIN 4102 Part 12. For wall and ceiling mounting. Lock can be opened without tools.
Detailed information on the approved installation variants can be found in the corresponding test documents.
Sales unit: 25 pieces
Lieske Part No.: 524818

Collective holder made of metal for high mechanical stability, even in the event of fire. Suitable for safe installation above fire protection ceilings. Also approved as a cable-specific variant for electrical functional integrity in accordance with DIN 4102 Part 12. For wall and ceiling mounting. Lock can be opened without tools.
Detailed information on the approved installation variants can be found in the corresponding test documents.
Sales unit: 10 pieces
Lieske Part No.: 958676

Collective holder made of metal for high mechanical stability, even in the event of fire. Suitable for safe installation above fire protection ceilings. Also approved as a cable-specific variant for electrical functional integrity in accordance with DIN 4102 Part 12. For wall and ceiling mounting. Lock can be opened without tools.
Detailed information on the approved installation variants can be found in the corresponding test documents.
Sales unit: 50 pieces
Lieske Part No.: 436532

Collective holder made of metal for high mechanical stability, even in the event of fire. Suitable for safe installation above fire protection ceilings. Also approved as a cable-specific variant for electrical functional integrity in accordance with DIN 4102 Part 12. For wall and ceiling mounting. Lock can be opened without tools.
Detailed information on the approved installation variants can be found in the corresponding test documents.
Sales unit: 25 pieces
Lieske Part No.: 541439

Collective holder made of metal for high mechanical stability, even in the event of fire. Suitable for safe installation above fire protection ceilings. Also approved as a cable-specific variant for electrical functional integrity in accordance with DIN 4102 Part 12. For wall and ceiling mounting. Lock can be opened without tools.
Detailed information on the approved installation variants can be found in the corresponding test documents.
Sales unit: 10 pieces
Lieske Part No.: 1320365

Long tray for collective bracket type 2031/M15, for functional integrity as a cable-specific mounting variant.
Sales unit: 25 pieces
Lieske Part No.: 927900

Adhesive clip, for clamping onto the cable, suitable for steel nails 2 mm
Sales unit: 200 pieces
Lieske Part No.: 968161

Adhesive clip, for clamping onto the cable, suitable for steel nails 2 mm
Sales unit: 200 pieces
Lieske Part No.: 388261

Iso-nail clamps
for fastening to steel needles up to 2 mm thickness,
halogen-free.
material: polypropylene
Color: gray
Cable diameter: 2-4 mm Type: 4028 2-4 item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 556175

Iso-nail clamps
for mounting with steel needles to 2 mm thick,
halogen-free.
Material: Polypropylene
Color: gray
Cable diameter: 4-7 mm

Type: 4029 4-7
Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 419283

Iso-nail clamps for fastening to steel needles up to 2 mm thickness, halogen-free. Material: Polypropylene Color: gray cable diameter: 7 -

mm Type: 4 3 7 -

Sales unit:
ST.
Sales unit: 100 pieces
Lieske Part No.: 858707