Counter trough, for all U-clamps, to slide onto the clamp bracket, versatile use as a double counter trough and/or pressure trough, can be used with any U-clamp and rail without changing the clamping range. The cable diameter to be clamped corresponds to that of the U-clamp to be used. for U-clamp: B ... BA ... BU ... BF ... BW ... for C-profile rails with slot width: 11 - 12 mm 16 - 17 mm 18 - 22 mm for flat iron with material thickness t: 4 - 12 mm for angle steel, U-iron with a leg length: 40 mm and t= 4 - 6 mm Dimensions (approx. dimensions) for cable diameter: 12 - 16 mm Length L: 74 mm Material: Steel, strip galvanized in accordance with DIN EN 10346
Sales unit: 50 pieces
Lieske Part No.: 704942

NIEDAX - Make: GWS 18
counter sink for clamp clips of type B 18, BA 18, BU 18, BF 18 and BW 18, galvanized to DIN EN 10346, versatile as a dual counter sink and / or pressure trough with each bracket clamp and rail diameter without change. The exciting to cable diameter to be used corresponds to the U clamp.

for cable diameter: 14 - 18 mm

L Length: 74 mm NIEDAX model no. GWS 18 Type: GWS18




Quantity: 1 unit.
Sales unit: 50 pieces
Lieske Part No.: 641446

Counter trough, for all U-clamps, to slide onto the clamp bracket, versatile use as a double counter trough and/or pressure trough, can be used with any U-clamp and rail without changing the clamping range. The cable diameter to be clamped corresponds to that of the U-clamp to be used. for U-clamp: B ... BA ... BU ... BF ... BW ... for C-profile rails with slot width: 11 - 12 mm 16 - 17 mm 18 - 22 mm for flat iron with material thickness t: 4 - 12 mm for angle steel, U-iron with a leg length: 40 mm and t= 4 - 6 mm Dimensions (approx. dimensions) for cable diameter: 18 - 22 mm Length L: 74 mm Material: Steel, strip galvanized in accordance with DIN EN 10346
Sales unit: 50 pieces
Lieske Part No.: 660539

Counter trough, for all U-clamps, to slide onto the clamp bracket, versatile use as a double counter trough and/or pressure trough, can be used with any U-clamp and rail without changing the clamping range. The cable diameter to be clamped corresponds to that of the U-clamp to be used. for U-clamp: B ... BA ... BU ... BF ... BW ... for C-profile rails with slot width: 11 - 12 mm 16 - 17 mm 18 - 22 mm for flat iron with material thickness t: 4 - 12 mm for angle steel, U-iron with a leg length: 40 mm and t= 4 - 6 mm Dimensions (approx. dimensions) for cable diameter: 22 - 26 mm Length L: 74 mm Material: Steel, strip galvanized in accordance with DIN EN 10346
Sales unit: 50 pieces
Lieske Part No.: 134751

Counter trough, for all U-clamps, to slide onto the clamp bracket, versatile use as a double counter trough and/or pressure trough, can be used with any U-clamp and rail without changing the clamping range. The cable diameter to be clamped corresponds to that of the U-clamp to be used. for U-clamp: B ... BA ... BU ... BF ... BW ... for C-profile rails with slot width: 11 - 12 mm 16 - 17 mm 18 - 22 mm for flat iron with material thickness t: 4 - 12 mm for angle steel, U-iron with a leg length: 40 mm and t= 4 - 6 mm Dimensions (approx. dimensions) for cable diameter: 26 - 30 mm Length L: 74 mm Material: steel, strip galvanized in accordance with DIN EN 10346
Sales unit: 50 pieces
Lieske Part No.: 876591

Counter trough, for all U-clamps, to slide onto the clamp bracket, versatile use as a double counter trough and/or pressure trough, can be used with any U-clamp and rail without changing the clamping range. The cable diameter to be clamped corresponds to that of the U-clamp to be used. for U-clamp: B ... BA ... BU ... BF ... BW ... for C-profile rails with slot width: 11 - 12 mm 16 - 17 mm 18 - 22 mm for flat iron with material thickness t: 4 - 12 mm for angle steel, U-iron with a leg length: 40 mm and t= 4 - 6 mm Dimensions (approx. dimensions) for cable diameter: 30 - 34 mm Length L: 74 mm Material: steel, strip galvanized in accordance with DIN EN 10346
Sales unit: 50 pieces
Lieske Part No.: 595105

Counter trough, for all U-clamps, to slide onto the clamp bracket, versatile use as a double counter trough and/or pressure trough, can be used with any U-clamp and rail without changing the clamping range. The cable diameter to be clamped corresponds to that of the U-clamp to be used. for U-clamp: B ... BA ... BU ... BF ... BW ... for C-profile rails with slot width: 11 - 12 mm 16 - 17 mm 18 - 22 mm for flat iron with material thickness t: 4 - 12 mm for angle steel, U-iron with a leg length: 40 mm and t= 4 - 6 mm Dimensions (approx. dimensions) for cable diameter: 34 - 38 mm Length L: 74 mm Material: steel, strip galvanized in accordance with DIN EN 10346
Sales unit: 50 pieces
Lieske Part No.: 294957

NIEDAX - Make: GWU
Universal counter well, for all clamps, made ​​of impact-resistant polystyrene, halogen-free, for insertion in the clamp bracket. for cable diameter: 9 -
. mm Length: 45 mm NIEDAX Model No.: GWU
Type: GWU

ST.
Lieske Part No.: 892654

NIEDAX - Make: GWU 110
Universal counter well, for all clamps, made of impact-resistant polystyrene, halogen-free, for insertion in the clamp bracket.

for cable diameter: 100 - 110 mm

Length: 45 mm

NIEDAX model no. GWU 110

Type: GWU110
Quantity: 1 unit.
Sales unit: 25 pieces
Lieske Part No.: 339533

NIEDAX - Make: GWU
2 universal counter well, for all clamps, made ​​of impact-resistant polystyrene, halogen-free, for insertion in the clamp bracket. for cable diameter: 6 -
2 mm Length: 4 mm NIEDAX Model No.: GWU.
2 Type: GWU
2 Quantity:
ST.
Sales unit: 100 pieces
Lieske Part No.: 710892

NIEDAX - Make: GWU 14
Universal counter well, for all clamps, made of impact-resistant polystyrene, halogen-free, for insertion in the clamp bracket.

for cable diameters 10 - 14 mm

Length: 40 mm

NIEDAX model no. GWU 14 Type: GWU14


Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 438628

NIEDAX - Make: GWU
6 universal counter well, for all clamps, made of impact-resistant polystyrene, halogen-free, for insertion in the clamp bracket. for cable diameter:
2 -
6 mm Length: 4 mm NIEDAX model no. GWU
6 Type: GWU
6 item:
ST.
Sales unit: 100 pieces
Lieske Part No.: 784063

NIEDAX - Make: GWU 18
Universal counter well, for all clamps, made of impact-resistant polystyrene, halogen-free, for insertion in the clamp bracket.

for cable diameter: 14 - 18 mm

Length: 40 mm

NIEDAX model no. GWU 18 Type: GWU18


Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 165428

NIEDAX - Make: GWU 22
universal counter well, for all clamps, made ​​of impact-resistant polystyrene, halogen-free, for insertion in the clamp bracket. suitable for cable diameters 18 - 22 mm Length: 40 mm NIEDAX Model No.: GWU 22nd Type: GWU22








Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 605919

NIEDAX - Make: GWU 26
Universal counter well, for all clamps, made of impact-resistant polystyrene, halogen-free, for insertion in the clamp bracket.

for cable diameters 22 - 26 mm

Length: 40 mm

NIEDAX model no. GWU 26 Type: GWU26


Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 228915

NIEDAX - Make: GWU 30
Universal counter well, for all clamps, made of impact-resistant polystyrene, halogen-free, for insertion in the clamp bracket.

for cable diameters 26 - 30 mm

Length: 40 mm

NIEDAX model no. GWU 30

Type: GWU30
Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 428224

NIEDAX - Make: GWU 34
universal counter well, for all clamps, made ​​of impact-resistant polystyrene, halogen-free, for insertion in the clamp bracket. suitable for cable diameters 30 - 34 mm Length: 40 mm . NIEDAX Model No.: GWU 34 Type: GWU34








Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 562901

NIEDAX - Make: GWU 38
Universal counter well, for all clamps, made of impact-resistant polystyrene, halogen-free, for insertion in the clamp bracket.

for cable diameter: 34 - 38 mm

Length: 40 mm

NIEDAX model no. GWU 38

Type: GWU38
Quantity: 1 unit.
Sales unit: 50 pieces
Lieske Part No.: 148557

NIEDAX - Make: GWU 42
Universal counter well, for all clamps, made of impact-resistant polystyrene, halogen-free, for insertion in the clamp bracket.

for cable diameters 38 - 42 mm

Length: 40 mm

NIEDAX model no. GWU 42

Type: GWU42
Quantity: 1 unit.
Sales unit: 50 pieces
Lieske Part No.: 455843

NIEDAX - Make: GWU 46 universal counter well, for all clamps, made of impact-resistant polystyrene, halogen-free, for insertion in the clamp bracket. for cable diameter: 42-46 mm Length: 4 mm NIEDAX Model No.: GWU 46 Type: GWU46 item.
ST.
Lieske Part No.: 860034

NIEDAX - Make: GWU 50
Universal counter well, for all clamps, made of impact-resistant polystyrene, halogen-free, for insertion in the clamp bracket.

for cable diameters 46 - 50 mm

Length: 40 mm

NIEDAX model no. GWU 50 Type: GWU50


Quantity: 1 unit.
Sales unit: 50 pieces
Lieske Part No.: 218570

NIEDAX - Make: GWU 54
Universal counter well, for all clamps, made of impact-resistant polystyrene, halogen-free, for insertion in the clamp bracket.

for cable diameters 50 - 54 mm Length: 45 mm NIEDAX Model No.: GWU 54th Type: GWU54






Quantity: 1 unit.
Lieske Part No.: 215972

NIEDAX - Make: GWU 58 universal counter well, for all clamps, made of impact-resistant polystyrene, halogen-free, for insertion in the clamp bracket. for cable diameter: 54 - 58 mm Length: 45 mm NIEDAX Model No.: GWU 58 Type: GWU58 item.
ST.
Sales unit: 50 pieces
Lieske Part No.: 804516

NIEDAX - Make: GWU 64 universal counter well, for all clamps, made of impact-resistant polystyrene, halogen-free, for insertion in the clamp bracket. for cable diameters. 58-64 mm Length: 45 mm NIEDAX Model No.: GWU 64 Type: GWU64 item:
ST.
Sales unit: 50 pieces
Lieske Part No.: 945095

NIEDAX - Make: GWU 70
Universal counter well, for all clamps, made of impact-resistant polystyrene, halogen-free, for insertion in the clamp bracket.

for cable diameters 64 - 70 mm

Length: 45 mm

NIEDAX model no. GWU 70

Type: GWU70
Quantity: 1 unit.
Sales unit: 50 pieces
Lieske Part No.: 663960

NIEDAX - Make: GWU 76 universal counter well, for all clamps, made of impact-resistant polystyrene, halogen-free, for insertion in the clamp bracket. for cable diameter: 7-76 mm Length: 45 mm NIEDAX Model No.: GWU 76 Type: GWU76 item.
ST.
Lieske Part No.: 743077

NIEDAX - Make: GWU 82
universal counter well, for all clamps, made ​​of impact-resistant polystyrene, halogen-free, for insertion in the clamp bracket. suitable for cable diameters: 76 - 82 mm Length: 45 mm . NIEDAX Model No.: GWU 82 Type: GWU82








Quantity: 1 unit.
Lieske Part No.: 114553

NIEDAX - Make: GWU 90
Universal counter well, for all clamps, made of impact-resistant polystyrene, halogen-free, for insertion in the clamp bracket.

for cable diameters 82 - 90 mm

Length: 45 mm

NIEDAX model no. GWU 90

Type: GWU90
Quantity: 1 unit.
Lieske Part No.: 388558

Cable holder, for direct mounting on the wall or in rails with 16-17 mm slot width, cable holder hot-dip galvanized according to DIN EN ISO 1461, screw and sliding nut galvanized according to DIN EN ISO 4042 and DIN 50962 / DIN EN ISO 19598. for cable Ø: max. 60 mm
Sales unit: 100 pieces
Lieske Part No.: 455024

Cable holder, for direct mounting on the wall or in rails with 16-17 mm slot width, cable holder hot-dip galvanized according to DIN EN ISO 1461, screw and sliding nut galvanized according to DIN EN ISO 4042 and DIN 50962 / DIN EN ISO 19598. for cable Ø: max. 70 mm
Sales unit: 50 pieces
Lieske Part No.: 710095

Emergency link, for extending knotted chains. for knotted chain: KCH... Dimensions (approx. dimensions) Emergency link inner dimension H: 28 mm Material thickness: 4 mm Material: Stainless steel, material no. 1.4301, 1.4303
Sales unit: 100 pieces
Lieske Part No.: 1345162

Link chain, for suspensions. The load-bearing capacity information only applies if the chain is sufficiently anchored to the supporting surface. Dimensions (approx. dimensions) Inner chain link dimension H: 26 mm Outer chain link dimension B: 12 mm Material thickness t: 3 mm Load-bearing capacity F: 0.45 kN Delivery length L: 30 m Material: Steel, hot-dip galvanized
Sales unit: 30 meters
Lieske Part No.: 112490

Kabeltragwannensystem, für die Wandmontage oder zur Befestigung an Schienen. In Anlehnung an die VDE 0298-565-1 und VDE 0298-565-2 sollte ein max. Stützabstand von 0,8 m nicht überschritten werden. Die Tragfähigkeitsangaben gelten nur bei ausreichender Verankerung mit dem tragenden Untergrund und wenn im Klemmbereich die Oberflächen der vertikal verlaufenden Profil-/Ankerschienen und der Wannentragschienen aus Stahl oder verzinktem Stahl sind. Ist der Klemmbereich mit einem Farbanstrich versehen, muss dieser entfernt werden, da sonst die Tragfähigkeit nicht gegeben bzw. gewährleistet ist. Gefahr des Abrutschens! 1. Das Kabeltragwannensystem in den Wannenbreiten 40, 50, 60, 70, 80 und 120 mm auf Anfrage als Sonderanfertigung lieferbar. Befestigungsmaterial muss, je nach Anwendungsfall, gesondert bestellt werden. Abmessungen (ca. Maße) Wanne B x L : 100 x 200 mm Anzahl der Tragwannen übereinander : 5 Abstand der Tragwannen : 100 mm Tragfähigkeit F bei B/2 : 0,5 kN Schiene H x B : 485 x 72 mm Schienenlochung : 11 x 16 mm mittiger Lochabstand : 100 mm Anzahl der Lochung : 5 Werkstoff : Stahl, tauchfeuerverzinkt nach DIN EN ISO 1461
Lieske Part No.: 509654

NIEDAX - Make: LW 16
Long trough for clamp clamp type B 16, BA 16, BU 16, BF 16 and BW 16, from steel strip galvanized to DIN EN 10346th Additionally approved for function maintenance to DIN 4102, Part 12.1.91, if the boundary conditions are fulfilled for integrity and then only for the Band type B 16 + BU 16

for cable diameter: 8 - 13 mm

L Length: 200 mm

NIEDAX model no. LW 16

Type: LW16
Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 150979

NIEDAX - Make: LW 22 long trough for clamp clamp type B 22, BA 22, BU 22, BF 22 and BW 22, from steel strip galvanized to DIN EN
346th Additionally approved for function maintenance to DIN 4
2, part
2 /
.9
If the conditions are met for integrity and then only for the Band type B 22 + BU 22 for cable diameter:
3 -
9 mm Length L: 2 mm NIEDAX model no. LW 22 Type: LW22 item:
ST.
Sales unit: 100 pieces
Lieske Part No.: 845505

NIEDAX - Make: LW 26
long trough for clamp clamp type B 26, BA 26, BU 26, BF 26 and BW 26, from steel strip galvanized to DIN EN 10346th Additionally approved for function maintenance to DIN 4102, Part 12.1.91, if the boundary conditions are fulfilled for integrity and then only for the Band type B 26 + BU 26 for cable diameters 19 - 23 mm



L Length: 200 mm

NIEDAX model no. LW 26 Type: LW26


Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 370240

NIEDAX - Make: LW 34
long trough for clamp clamp type B 34, BA 34, BU 34, BF 34 and BW 34, from steel strip galvanized to DIN EN 10346th Additionally approved for function maintenance to DIN 4102, Part 12.1.91, if the boundary conditions are fulfilled for integrity and then only for the Band type B 34 + BU 34 for cable diameters 23 - 31 mm



L Length: 200 mm

NIEDAX model no. LW 34 Type: LW34


Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 635644

NIEDAX - Make: LW 38
long trough for clamp clamp type B 38, BA 38, BU 38, BF 38 and BW 38, from steel strip galvanized to DIN EN 10346th Additionally approved for function maintenance to DIN 4102, Part 12.1.91, if the boundary conditions are fulfilled for integrity and then only for the Band type B 38 + BU 38 for cable diameters: 31 - 36 mm



L Length: 200 mm

NIEDAX model no. LW 38 Type: lw38


Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 613556

NIEDAX - Make: LW 42
Long trough for clamp clamp type B 42, BA 42, BU 42, BF 42 and BW 42, from steel strip galvanized to DIN EN 10346th Additionally approved for function maintenance to DIN 4102, Part 12.1.91, if the boundary conditions are fulfilled for integrity and then only for the Band type B 42 + BU 42

for cable diameters 36 - 40 mm

L Length: 200 mm

NIEDAX model no. LW 42

Type: LW42
Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 564796

Long tray, for all U-clamps, to increase the contact surface. For use in functional maintenance, please observe additional regulations! for U-clamp: B ... BA ... BU ... BF ... BW ... in functional maintenance approved for: B ... without counter tray BU ... without counter tray for C-profile rails with slot width: 11 - 12 mm 16 - 17 mm 18 - 22 mm for flat iron with material thickness t: 4 - 12 mm for angle steel, U-iron with a leg length: 40 mm and t= 4 - 6 mm Dimensions (approx. dimensions) for cable Ø: 39 - 43 mm Length L: 200 mm Material: Steel, strip galvanized in accordance with DIN EN 10346
Sales unit: 100 pieces
Lieske Part No.: 545417

NIEDAX - Make: LW 5 long trough for clamp clamp type B 5, 5 BA, BU 5, 5 BF and BW 5, from steel strip galvanized to DIN EN
346th Additionally approved for function maintenance to DIN 4
2, part
2 /
.9
If the conditions are met for integrity and then only for the Band type B 5 + BU 5th for cable diameters 43 - 47 mm Length L: 2 mm NIEDAX Model No.: LW 5 Type: LW5 item.
ST.
Sales unit: 50 pieces
Lieske Part No.: 882897

Long trough, for all U-clamps, to increase the contact surface. For use in functional maintenance, please observe additional regulations! for U-clamp: B ... BA ... BU ... BF ... BW ... in functional maintenance approved for: B ... without counter trough BU ... without counter trough for C-profile rails with slot width: 11 - 12 mm 16 - 17 mm 18 - 22 mm for flat iron with material thickness t: 4 - 12 mm for angle steel, U-iron with a leg length: 40 mm and t= 4 - 6 mm Dimensions (approx. dimensions) for cable Ø: 47 - 51 mm Length L: 200 mm Material: Steel, strip galvanized in accordance with DIN EN 10346
Sales unit: 50 pieces
Lieske Part No.: 893472

Long trough, for all U-clamps, to increase the contact surface. For use in functional maintenance, please observe additional regulations! for U-clamp: B ... BA ... BU ... BF ... BW ... in functional maintenance approved for: B ... without counter trough BU ... without counter trough for C-profile rails with slot width: 11 - 12 mm 16 - 17 mm 18 - 22 mm for flat iron with material thickness t: 4 - 12 mm for angle steel, U-iron with a leg length: 40 mm and t= 4 - 6 mm Dimensions (approx. dimensions) for cable Ø: 51 - 55 mm Length L: 200 mm Material: Steel, strip galvanized in accordance with DIN EN 10346
Sales unit: 50 pieces
Lieske Part No.: 557701

Long trough, for all U-clamps, to increase the contact surface. For use in functional maintenance, please observe additional regulations! for U-clamp: B ... BA ... BU ... BF ... BW ... in functional maintenance approved for: B ... without counter trough BU ... without counter trough for C-profile rails with slot width: 11 - 12 mm 16 - 17 mm 18 - 22 mm for flat iron with material thickness t: 4 - 12 mm for angle steel, U-iron with a leg length: 40 mm and t= 4 - 6 mm Dimensions (approx. dimensions) for cable Ø: 55 - 61 mm Length L: 200 mm Material: Steel, strip galvanized in accordance with DIN EN 10346
Sales unit: 50 pieces
Lieske Part No.: 678117

Long trough, for all U-clamps, to increase the contact surface. For use in functional maintenance, please observe additional regulations! for U-clamp: B ... BA ... BU ... BF ... BW ... in functional maintenance approved for: B ... without counter trough BU ... without counter trough for C-profile rails with slot width: 11 - 12 mm 16 - 17 mm 18 - 22 mm for flat iron with material thickness t: 4 - 12 mm for angle steel, U-iron with a leg length: 40 mm and t= 4 - 6 mm Dimensions (approx. dimensions) for cable Ø: 61 - 67 mm Length L: 200 mm Material: Steel, strip galvanized in accordance with DIN EN 10346
Sales unit: 50 pieces
Lieske Part No.: 212985

Long tray, for all U-clamps, to increase the contact surface. For use in functional maintenance, please observe additional regulations! for U-clamp: B ... BA ... BU ... BF ... BW ... in functional maintenance approved for: B ... without counter tray BU ... without counter tray for C-profile rails with slot width: 11 - 12 mm 16 - 17 mm 18 - 22 mm for flat iron with material thickness t: 4 - 12 mm for angle steel, U-iron with a leg length: 40 mm and t= 4 - 6 mm Dimensions (approx. dimensions) for cable Ø: 67 - 73 mm Length L: 200 mm Material: Steel, strip galvanized in accordance with DIN EN 10346
Sales unit: 50 pieces
Lieske Part No.: 599983

Pole connection holder, with coupling, for crossing fastening of cable protection pipes to the poles of cable trays and cable ladders. Can be used for: Machine installation pipe MI 30... on cable trays RL..., RS... etc. and cable ladders KL... Dimensions (approx. dimensions) for pole clamp width B: = 15 mm Clamp length: 120 mm Coupling Ø: 30 mm Coupling length: 80 mm Material: Steel, hot-dip galvanized in accordance with DIN EN ISO 1461
Lieske Part No.: 317845

Beam connection holder, with round steel bracket, for crossing fastening of cable protection pipes to beams of cable trays and cable ladders. Can be used for: Machine installation pipe MI 30... on cable trays RL..., RS... etc. and cable ladders KL... Dimensions (approx. dimensions) for beam clamp width B: = 15 mm Clamp length: 120 mm Round steel bracket Ø: 30 mm Material: Steel, hot-dip galvanized in accordance with DIN EN ISO 1461
Lieske Part No.: 125531

Stile connection holder, with round steel bracket, for crossing fastening of cable protection pipes to stiles of wide-span cable trays and wide-span cable ladders. Can be used for: Machine installation pipe MI 30... on wide-span cable trays WRL..., WRLM... and wide-span cable ladders WSL..., WSLM... Dimensions (approx. dimensions) for stile clamp width B: = 30 mm Clamp length: 120 mm Round steel bracket Ø: 30 mm Material: Steel, hot-dip galvanized in accordance with DIN EN ISO 1461
Lieske Part No.: 125529

Pole connection holder, with round steel bracket, for crossing fastening of cable protection pipes to the poles of the Allround cable ladders. Can be used for: Machine installation pipe MI 30... on Allround cable ladders KRC... / KRO... Dimensions (approx. dimensions) for cable ladder poles H x W: 60 x 20 mm Clamp length: 120 mm Round steel bracket Ø: 30 mm Material: Steel, hot-dip galvanized in accordance with DIN EN ISO 1461
Lieske Part No.: 593760