Clamps in Fixing hardware

Unsere Kabelschelle mit selbstklebendem Sockel SES-SP ist eine Kabelschelle mit Clipverschluss. Als Befestigung kann eine M4-Schraube oder das angebrachte Klebeband verwendet werden. Diese Kabelschelle ist halogenfrei und RoHS-konform. Verkaufseinheit: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 499376

The PLIO button band is made of soft PVC. It is used for bundling cables, cable harnesses, strands and wires.
Sales unit: 50 meters
Lieske Part No.: 470529

The BV retaining clip for our installation duct is available in different sizes for different installation ducts. The retaining clip is made of soft PVC. The temperature range is -20 to +60°C. RoHS compliant. Retaining clip
Sales unit: 25 pieces
Lieske Part No.: 847893

Incremental encoder, DFS60, DFS60B-THCA04096, Mechanical design: through hollow shaft 15 mm, Communication interface: 10 V ... 32 V, TTL, RS-422, Connection type: connector, M23, 12-pin, radial, Pulses per revolution: 4,096
Lieske Part No.: 558002

Incremental encoder, DFS60, DFS60B-S4EC00060, Mechanical design: solid shaft clamping flange 10 mm x 19 mm, Communication interface: 10 V ... 32 V, HTL, push pull, Connection type: connector, M12, 8-pin, radial, Pulses per revolution: 60
Lieske Part No.: 475305

Incremental encoder, DFS60, DFS60B-S4CC00900, Mechanical design: solid shaft clamping flange 10 mm x 19 mm, Communication interface: 10 V ... 32 V, TTL, RS-422, Connection type: connector, M12, 8-pin, radial, Pulses per revolution: 900
Lieske Part No.: 475419

Mounting brackets and plates, Mounting bracket, BEF-W250, Description: Mounting bracket, Material: Steel, Details: Steel, galvanized, Scope of delivery: Incl. mounting material, Suitable for: W250-2
Lieske Part No.: 472742

Mounting brackets and plates, Mounting bracket, BEF-W100-A, Description: Mounting bracket for wall mounting, Material: Stainless steel, Details: Stainless steel, Scope of delivery: Incl. mounting material, Suitable for: W8, W8G, W8 Laser, W8 Inox, G6, G6 Inox, W100 Laser, W100-2, KTM Core, KTM Prime, CSM, LUTM
Lieske Part No.: 472686

Veri-Genius, verification set for MV500 and MV440 readers, delivery includes: single license (on USB stick) and calibration card, can be loaded onto MV500 and MV440 device via ALM. SIMATIC RF verification license and calibration card
Lieske Part No.: 612028

Sport 31Chain hanger, suspended mounting
Lieske Part No.: 673114

Sport 31Chain hanger, suspended mounting
Lieske Part No.: 673116

Chain hanger Licross
Lieske Part No.: 1714712

Sales unit: 5 pieces
Lieske Part No.: 735197

Mounting clamp SILVYN® SCH 35-50 S, Mounting clamp, Clamping range (min./max.): 35mm - 50mm, Steel, Areas of application: SILVYN® SSV-M/SSVZ-M,SILVYN® SSV/SSV-Z,In combination with:, Benefits: Clamps several hose dimensions with one clamp,Enables safe strain relief
Sales unit: 50 pieces
Lieske Part No.: 1313104

Fastening element CORD CLIPS CC 11 CABLE CLAMP, fastening element, natural, polyamide, halogen-free, , Areas of application: Also suitable for parallel laying of several cables, Fastening elements for cables and lines, Suitable for cables up to 14.5 mm in diameter, Hook holders made of nylon with adhesive strips, Benefits: The special profile of this holder enables quick assembly and disassembly of one or more cables without damaging the insulation, No preparatory work such as mounting holes necessary
Sales unit: 100 pieces
Lieske Part No.: 436966

Fastening element CORD CLIPS CC 21 CABLE CLAMP, fastening element, natural, polyamide, halogen-free, , Areas of application: Also suitable for parallel laying of several cables, Fastening elements for cables and lines, Suitable for cables up to 14.5 mm in diameter, Hook holders made of nylon with adhesive strips, Benefits: The special profile of this holder enables quick assembly and disassembly of one or more cables without damaging the insulation, No preparatory work such as mounting holes necessary
Sales unit: 100 pieces
Lieske Part No.: 2055621

Bracket SILVYN® RKS 1 18/15, bracket, for hose outer diameter: 18.0mm, bore diameter: 6.4mm, steel, areas of application: suitable for medium mechanical stress, suitable for outdoor use, for use with SILVYN® protective hoses, universally suitable for guiding and/or bundling cables, protective hoses and pipes, largely resistant to acids and alkalis, benefits: large variety of diameters allows for versatile areas of application, rubber profile made of polychloroprene protects the held products from abrasion, increased protection of the held products through secure guidance and/or bundling along their installation, increased protection of the held products through secure fastening to the housing, even if direct insertion into the housing is not possible, easy installation using a fastening hole
Sales unit: 100 pieces
Lieske Part No.: 2055642

Bracket SILVYN® RKS 1 8/12, bracket, for hose outer diameter: 8.0mm, bore diameter: 5.3mm, steel, areas of application: suitable for medium mechanical stress, suitable for outdoor use, for use with SILVYN® protective hoses, universally suitable for guiding and/or bundling cables, protective hoses and pipes, largely resistant to acids and alkalis, benefits: large variety of diameters allows for versatile areas of application, rubber profile made of polychloroprene protects the held products from abrasion, increased protection of the held products through secure guidance and/or bundling along their installation, increased protection of the held products through secure fastening to the housing, even if direct insertion into the housing is not possible, easy installation using a fastening hole
Sales unit: 100 pieces
Lieske Part No.: 438067

Bracket SILVYN® RKS 1 10/12, bracket, for hose outer diameter: 10.0mm, bore diameter: 5.3mm, steel, areas of application: suitable for medium mechanical stress, suitable for outdoor use, for use with SILVYN® protective hoses, universally suitable for guiding and/or bundling cables, protective hoses and pipes, largely resistant to acids and alkalis, benefits: large variety of diameters allows for versatile areas of application, rubber profile made of polychloroprene protects the held products from abrasion, increased protection of the held products through secure guidance and/or bundling along their installation, increased protection of the held products through secure fastening to the housing, even if direct insertion into the housing is not possible, easy installation using a fastening hole
Sales unit: 100 pieces
Lieske Part No.: 438064

Bracket SILVYN® RKS 1 13/15, bracket, for hose outer diameter: 13.0mm, bore diameter: 6.4mm, steel, areas of application: suitable for medium mechanical stress, suitable for outdoor use, for use with SILVYN® protective hoses, universally suitable for guiding and/or bundling cables, protective hoses and pipes, largely resistant to acids and alkalis, benefits: large variety of diameters allows for versatile areas of application, rubber profile made of polychloroprene protects the held products from abrasion, increased protection of the held products through secure guidance and/or bundling along their installation, increased protection of the held products through secure fastening to the housing, even if direct insertion into the housing is not possible, easy installation using a fastening hole
Sales unit: 100 pieces
Lieske Part No.: 2055641

Bracket SILVYN® RKS 1 32/15, bracket, for hose outer diameter: 32.0mm, bore diameter: 6.4mm, steel, areas of application: suitable for medium mechanical stress, suitable for outdoor use, for use with SILVYN® protective hoses, universally suitable for guiding and/or bundling cables, protective hoses and pipes, largely resistant to acids and alkalis, benefits: large variety of diameters allows for a wide range of applications, rubber profile made of polychloroprene protects the held products from abrasion, increased protection of the held products through secure guidance and/or bundling along their installation, increased protection of the held products through secure fastening to the housing, even if direct insertion into the housing is not possible, easy installation using a fastening hole
Sales unit: 100 pieces
Lieske Part No.: 438075

Bracket SILVYN® RKS 1 14/15, bracket, for hose outer diameter: 14.0mm, bore diameter: 6.4mm, steel, areas of application: suitable for medium mechanical stress, suitable for outdoor use, for use with SILVYN® protective hoses, universally suitable for guiding and/or bundling cables, protective hoses and pipes, largely resistant to acids and alkalis, benefits: large variety of diameters allows for a wide range of applications, rubber profile made of polychloroprene protects the held products from abrasion, increased protection of the held products through secure guidance and/or bundling along their installation, increased protection of the held products through secure fastening to the housing, even if direct insertion into the housing is not possible, easy installation using a fastening hole
Sales unit: 100 pieces
Lieske Part No.: 438070

Bracket SILVYN® RKS 1 15/15, bracket, for hose outer diameter: 15.0mm, bore diameter: 6.4mm, steel, areas of application: suitable for medium mechanical stress, suitable for outdoor use, for use with SILVYN® protective hoses, universally suitable for guiding and/or bundling cables, protective hoses and pipes, largely resistant to acids and alkalis, benefits: large variety of diameters allows for a wide range of applications, rubber profile made of polychloroprene protects the held products from abrasion, increased protection of the held products through secure guidance and/or bundling along their installation, increased protection of the held products through secure fastening to the housing, even if direct insertion into the housing is not possible, easy installation using a fastening hole
Sales unit: 100 pieces
Lieske Part No.: 667633

Bracket SILVYN® RKS 1 20/15, bracket, for hose outer diameter: 20.0mm, bore diameter: 6.4mm, steel, areas of application: suitable for medium mechanical stress, suitable for outdoor use, for use with SILVYN® protective hoses, universally suitable for guiding and/or bundling cables, protective hoses and pipes, largely resistant to acids and alkalis, benefits: large variety of diameters allows for versatile areas of application, rubber profile made of polychloroprene protects the held products from abrasion, increased protection of the held products through secure guidance and/or bundling along their installation, increased protection of the held products through secure fastening to the housing, even if direct insertion into the housing is not possible, easy installation using a fastening hole
Sales unit: 100 pieces
Lieske Part No.: 438073

Bracket SILVYN® RKS 1 25/15, bracket, for hose outer diameter: 25.0mm, bore diameter: 8.4mm, steel, areas of application: suitable for medium mechanical stress, suitable for outdoor use, for use with SILVYN® protective hoses, universally suitable for guiding and/or bundling cables, protective hoses and pipes, largely resistant to acids and alkalis, benefits: large variety of diameters allows for a wide range of applications, rubber profile made of polychloroprene protects the held products from abrasion, increased protection of the held products through secure guidance and/or bundling along their installation, increased protection of the held products through secure fastening to the housing, even if direct insertion into the housing is not possible, easy installation using a fastening hole
Sales unit: 100 pieces
Lieske Part No.: 1312107

Knotted chains in craft cardboard material: steel, galvanized, material quality: other, material: steel, design: knotted chain, material thickness: 2.2mm, surface: galvanized/electrolytically galvanized, breaking load: 2100 N, width: 10mm,
Lieske Part No.: 467178

Emergency S-hook material: steel, galvanized diameter: 4.0mm inner size: 35mm, material: steel, material quality: other, material thickness: 4mm, surface: galvanized/electrolytically galvanized
Lieske Part No.: 467179

Knotted chain material: steel, galvanized bundle 30m, material thickness: 2mm, material quality: other, surface: other, material: steel, design: knotted chain, breaking load: 1750 N, width: 9mm
Lieske Part No.: 299328

Knotted chain material: steel, galvanized bundle 30m, material quality: other, design: knotted chain, material: steel, surface: other, material thickness: 2.5mm, width: 11mm, breaking load: 2800N
Sales unit: 30 meters
Lieske Part No.: 299329

Fastening clamp for screwing on plastic
Sales unit: 100 pieces
Lieske Part No.: 904391

Terminal with large contact area for shielding the conductor.
Sales unit: 10 pieces
Lieske Part No.: 299754

Cable Marker Write-On Markers for individual labeling. When a cable wrap it the title block is protected by the transparent tape from dirt and abrasion. - Marking of cables up to max. 4 mm in diameter - large variety of different designation Beschriftfeldgrößen - Flexible packaging bag Markierererstellung marker-Size:
27 x 25.4 mm Lettering field size: 25.4 x 25.4 mm Max. Ø: 32,2 mm arc: 3 Type: WRITE ON
27/25TP item:
ST.
Lieske Part No.: 840599

Terminal with large contact area for shielding the conductor.
Sales unit: 10 pieces
Lieske Part No.: 843221

Terminal with large contact area for shielding the conductor.
Sales unit: 10 pieces
Lieske Part No.: 395713

Terminal with large contact area for shielding the conductor.
Sales unit: 10 pieces
Lieske Part No.: 263148

Terminal with large contact area for shielding the conductor.
Sales unit: 10 pieces
Lieske Part No.: 557792

Terminal with large contact area for shielding the conductor.
Sales unit: 10 pieces
Lieske Part No.: 114123

Terminal with large contact area for shielding the conductor.
Sales unit: 10 pieces
Lieske Part No.: 759309

Terminal with large contact area for shielding the conductor.
Sales unit: 10 pieces
Lieske Part No.: 393600

Terminal with large contact area for shielding the conductor.
Sales unit: 100 pieces
Lieske Part No.: 901133

Knotted chain made of steel in length 1m, stainless weight: 0.16 kg
Lieske Part No.: 323850