The EC Series cold shrink cable end caps are closed tubular rubber sleeves that are pre-stretched at the factory and fitted with a removable support coil. When positioned over the end of a cable, pipe or other cylindrical object, the support coil is pulled out, creating a reliable seal against environmental influences. Four different end caps are available to accommodate a wide range of diameters (from 11.7 mm to 84.3 mm).
The EC Series cold shrink cable end caps have good resistance to abrasion, water, fungi, acids, alkalis and ozone, ensuring a long service life. Installation does not require any tools or adhesive tape/mastic.
Sales unit: 10 pieces
Lieske Part No.: 783436

8420 and 8430 cold shrink insulation tubing is EPDM tubing that is a unique cold shrink connection system. The products are supplied pre-stretched on a retractable support coil, allowing efficient and easy assembly. When the support coil is retracted after the tubing is positioned, the tubing shrinks to form a watertight seal. The active deformation of the specially formulated material ensures a permanent seal and insulation from the environment.
8420 and 8430 series cold shrink insulation tubing is especially useful for electrical insulation on all solid dielectric (rubber or plastic) insulated wires and cable splices up to 1,000 V. They are suitable for indoor and outdoor use. They often provide good physical protection and environmental shielding on communication lines and other non-electrical applications (including cable jacket repairs). The temperature range is -40 °C to 90 °C. In applications where the product is continuously exposed to UV radiation, it should be wrapped with Super 33+T vinyl insulation tape or Self-vulcanizing silicone rubber tape 70, for example.
Sales unit: 10 pieces
Lieske Part No.: 393451

The 3MT 91-AH is a heat shrink connection set for crimp connectors designed for low voltages. It is suitable for 4- or 5-core, unshielded and unarmored insulated low-voltage plastic cables with up to 0.6/1 kV (according to HD 603 and IEC 60502-1). The cable cross-section range is 5 x 1.5 to 5 x 6 mm². RoHS compliant, halogen-free. Good electrical insulation and resistance to moisture, mechanical stress, chemicals and UV radiation.
The 3MT heat shrink connection set of the 91-AHSC series with screw connectors enables a simple, quick and secure cable connection and is suitable for all common plastic cables with PVC or XLPE insulation in low voltage. You can use it both indoors and outdoors and for underground installation. Due to its high shrinkage rate, it covers a large cross-section range, which is why only a few sizes are needed for a large number of connections. The connection set is extremely resistant to aging and chemicals and has very good mechanical strength. A set contains a thick-walled outer tube, four or five inner tubes, the same number of screw connectors, a hexagon wrench and emery cloth. The screw connectors are suitable for copper and aluminum conductors and do not require any special tools.
Lieske Part No.: 643982

Heat shrink tubing made of self-extinguishing polyolefin with hot melt adhesive coating. For ageing, UV and moisture resistant insulation of plastic and ground cables and as an outer tube for control cable sets. The diameter before shrinking is 19 mm and after shrinking 6 mm.
Lieske Part No.: 588102

Shrink sleeve Pliofine SAM 1.6
Sales unit: 150 meters
Lieske Part No.: 458980

Shrink sleeve Pliofine SAM 1.6 (1.22m)
Lieske Part No.: 458986

Shrink sleeve Pliofine SAM 6.4
Sales unit: 75 meters
Lieske Part No.: 458995

Shrink sleeve Pliofine SAM 9.5
Sales unit: 75 meters
Lieske Part No.: 459021

Shrink sleeve Pliofine SAM 12.7
Sales unit: 50 meters
Lieske Part No.: 459047

Shrink sleeve Pliofine SAM 16.0
Sales unit: 50 meters
Lieske Part No.: 459050

Shrink wrap Pliofine SAM 32.0 (1.22m)
Lieske Part No.: 459060

Shrink tube Pliofine SAM 1.6 Box (17m)
Lieske Part No.: 459073

Shrink tube Pliofine SAM 2.4 Box (15m)
Lieske Part No.: 459078

Shrink tube Pliofine SAM 3.2 Box (15m)
Lieske Part No.: 459083

Shrink tube Pliofine SAM 4.8 Box (12m)
Lieske Part No.: 459123

Shrink tube Pliofine SAM 6.4 Box (12m)
Lieske Part No.: 459127

Shrink tube Pliofine SAM 9.5 Box (8m)
Lieske Part No.: 459156

Shrink tube Pliofine SAM 12.7 Box (8m)
Lieske Part No.: 459159

Shrink tube Pliofine SAM 16.0 Box (6m)
Lieske Part No.: 459174

Shrink tube Pliofine SAM 19.0 Box (5m)
Lieske Part No.: 459183

Shrink tube Pliofine SAM 25.4 Box (5m)
Lieske Part No.: 459214

Heat shrink tubing Pliofine B-95 Box (8m)
Lieske Part No.: 460343

Schrumpfschlauch Pliofine B-160 Box (6m) Verkaufseinheit: 1 ST.
Lieske Part No.: 499367

Shrink tubing Pliofine B-EX 120
Sales unit: 150 meters
Lieske Part No.: 460484

Shrink tubing Pliofine B-EX 160
Sales unit: 150 meters
Lieske Part No.: 460502

Schrumpfschlauch Pliofine B-EX 240 Verkaufseinheit: 150 MTR
Sales unit: 150 meters
Lieske Part No.: 507436

Shrink tubing Pliofine B-EX 240
Sales unit: 150 meters
Lieske Part No.: 460514

Shrink tubing Pliofine B-EX 320
Sales unit: 150 meters
Lieske Part No.: 460546

Schrumpfschlauch Pliofine B-EX 480 Verkaufseinheit: 75 MTR
Sales unit: 75 meters
Lieske Part No.: 499379

Shrink tubing Pliofine B-EX 480
Sales unit: 75 meters
Lieske Part No.: 557172

Schrumpfschlauch Pliofine B-EX 640 Verkaufseinheit: 75 MTR
Sales unit: 75 meters
Lieske Part No.: 507437

Shrink tubing Pliofine B-EX 640
Sales unit: 75 meters
Lieske Part No.: 460570

Shrink tubing Pliofine B-EX 950
Sales unit: 75 meters
Lieske Part No.: 460572

Schrumpfschlauch Pliofine B-EX 1270 Verkaufseinheit: 50 MTR
Sales unit: 50 meters
Lieske Part No.: 499380

Schrumpfschlauch Pliofine B-EX 1270 Verkaufseinheit: 50 MTR
Sales unit: 50 meters
Lieske Part No.: 499381

Shrink tubing Pliofine B-EX 1270
Sales unit: 50 meters
Lieske Part No.: 460608

Shrink tubing Pliofine B-EX 1900
Sales unit: 30 meters
Lieske Part No.: 506715

Schrumpfschlauch Pliofine B-EX 1900 Verkaufseinheit: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 499384

Schrumpfschlauch Pliofine B-EX 1900 Verkaufseinheit: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 507458

Shrink tubing Pliofine B-EX 1900
Sales unit: 50 meters
Lieske Part No.: 460616

Shrink tubing Pliofine B-EX 2540
Sales unit: 30 meters
Lieske Part No.: 507398

Shrink tubing Pliofine B-EX 2540
Sales unit: 50 meters
Lieske Part No.: 460632

Shrink tubing Pliofine B-EX 3200
Sales unit: 30 meters
Lieske Part No.: 203932

Shrink tubing Pliofine B-EX 3200
Sales unit: 30 meters
Lieske Part No.: 359268

Shrink tubing Pliofine B-EX 3200
Sales unit: 50 meters
Lieske Part No.: 203937

Schrumpfschlauch Pliofine B-EX 3800 Verkaufseinheit: 30 MTR
Sales unit: 30 meters
Lieske Part No.: 499387

Shrink tubing Pliofine B-EX 3800
Sales unit: 30 meters
Lieske Part No.: 460636

Shrink tubing Pliofine B-EX 1600
Sales unit: 50 meters
Lieske Part No.: 507401

Shrink tubing Pliofine B-EX 1600
Sales unit: 50 meters
Lieske Part No.: 468029

Shrink tubing Pliofine B-EX 1270 (1.22m)
Lieske Part No.: 459767