Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Thermochromatic dots (TCP) as a shrink indicator. Locking rail enables cable repair without the cable end. Resistant to chemicals and alkaline earths. High weather resistance. Halogen-free. Packed in a set for simple and easy handling. RMS cable repair sleeves are placed around the affected area and closed with a locking rail. During the subsequent shrinking, the hot-melt adhesive on the inside seals the damaged area watertight and also compensates for unevenness in the cable surface.
Lieske Part No.: 343925

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Thermochromatic dots (TCP) as a shrink indicator. Locking rail enables cable repair without the cable end. Resistant to chemicals and alkaline earths. High weather resistance. Halogen-free. Packed in a set for simple and easy handling. RMS cable repair sleeves are placed around the affected area and closed with a locking rail. During the subsequent shrinking, the hot-melt adhesive on the inside seals the damaged area watertight and also compensates for unevenness in the cable surface.
Lieske Part No.: 1565689

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Thermochromatic dots (TCP) as a shrink indicator. Locking rail enables cable repair without the cable end. Resistant to chemicals and alkaline earths. High weather resistance. Halogen-free. Packed in a set for simple and easy handling. RMS cable repair sleeves are placed around the affected area and closed with a locking rail. During the subsequent shrinking, the hot-melt adhesive on the inside seals the damaged area watertight and also compensates for unevenness in the cable surface.
Lieske Part No.: 1132274

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Thermochromatic dots (TCP) as a shrink indicator. Locking rail enables cable repair without the cable end. Resistant to chemicals and alkaline earths. High weather resistance. Halogen-free. Packed in a set for simple and easy handling. RMS cable repair sleeves are placed around the affected area and closed with a locking rail. During the subsequent shrinking, the hot-melt adhesive on the inside seals the damaged area watertight and also compensates for unevenness in the cable surface.
Lieske Part No.: 1132261

Dickwandig: sehr guter Abrieb-, Knick- und Schnittschutz. 4:1 deckt großen Anwendungsbereich ab, hoher Anpressdruck. Thermoplastischer Innenkleber zum Schutz gegen äußere Einflüsse und zur Zugentlastung. Thermochromatische Punkte (TCP) als Schrumpfindikator. Verschlussschiene ermöglicht Kabelreparatur ohne Kabelende. Beständig gegen Chemikalien und Erdalkalien. Hohe Witterungsbeständigkeit. halogenfrei. Verpackung im Set für eine einfache Handhabung. RMS Kabelreparaturmanschetten werden um die betroffene Stelle gelegt und mit einer Verschlussschiene verschlossen. Beim anschließenden Schrumpfen dichtet der innenseitige Heißschmelzkleber die Schadstelle wasserdicht ab und gleicht dabei zusätzlich Unebenheiten des Kabeluntergrundes aus.
Lieske Part No.: 312012

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Thermochromatic dots (TCP) as a shrink indicator. Locking rail enables cable repair without the cable end. Resistant to chemicals and alkaline earths. High weather resistance. Halogen-free. Packed in a set for simple and easy handling. RMS cable repair sleeves are placed around the affected area and closed with a locking rail. During the subsequent shrinking, the hot-melt adhesive on the inside seals the damaged area watertight and also compensates for unevenness in the cable surface.
Lieske Part No.: 2057154

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Thermochromatic dots (TCP) as a shrink indicator. Locking rail enables cable repair without the cable end. Resistant to chemicals and alkaline earths. High weather resistance. Halogen-free. Packed in a set for simple and easy handling. RMS cable repair sleeves are placed around the affected area and closed with a locking rail. During the subsequent shrinking, the hot-melt adhesive on the inside seals the damaged area watertight and also compensates for unevenness in the cable surface.
Lieske Part No.: 1132275

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Thermochromatic dots (TCP) as a shrink indicator. Locking rail enables cable repair without the cable end. Resistant to chemicals and alkaline earths. High weather resistance. Halogen-free. Packed in a set for simple and easy handling. RMS cable repair sleeves are placed around the affected area and closed with a locking rail. During the subsequent shrinking, the hot-melt adhesive on the inside seals the damaged area watertight and also compensates for unevenness in the cable surface.
Lieske Part No.: 344054

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Thermochromatic dots (TCP) as a shrink indicator. Locking rail enables cable repair without the cable end. Resistant to chemicals and alkaline earths. High weather resistance. Halogen-free. Packed in a set for simple and easy handling. RMS cable repair sleeves are placed around the affected area and closed with a locking rail. During the subsequent shrinking, the hot-melt adhesive on the inside seals the damaged area watertight and also compensates for unevenness in the cable surface.
Lieske Part No.: 2129567

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Thermochromatic dots (TCP) as a shrink indicator. Locking rail enables cable repair without the cable end. Resistant to chemicals and alkaline earths. High weather resistance. Halogen-free. Packed in a set for simple and easy handling. RMS cable repair sleeves are placed around the affected area and closed with a locking rail. During the subsequent shrinking, the hot-melt adhesive on the inside seals the damaged area watertight and also compensates for unevenness in the cable surface.
Lieske Part No.: 1565688

Thick-walled: very good abrasion, kinking and cut protection. 4:1 covers a wide range of applications, high contact pressure. Thermoplastic inner adhesive for protection against external influences and for strain relief. Thermochromatic dots (TCP) as a shrink indicator. Locking rail enables cable repair without the cable end. Resistant to chemicals and alkaline earths. High weather resistance. Halogen-free. Packed in a set for simple and easy handling. RMS cable repair sleeves are placed around the affected area and closed with a locking rail. During the subsequent shrinking, the hot-melt adhesive on the inside seals the damaged area watertight and also compensates for unevenness in the cable surface.
Lieske Part No.: 2057159

Dickwandig: sehr guter Abrieb-, Knick- und Schnittschutz. 4:1 deckt großen Anwendungsbereich ab, hoher Anpressdruck. Thermoplastischer Innenkleber zum Schutz gegen äußere Einflüsse und zur Zugentlastung. Thermochromatische Punkte (TCP) als Schrumpfindikator. Verschlussschiene ermöglicht Kabelreparatur ohne Kabelende. Beständig gegen Chemikalien und Erdalkalien. Hohe Witterungsbeständigkeit. halogenfrei. Verpackung im Set für eine einfache Handhabung. RMS Kabelreparaturmanschetten werden um die betroffene Stelle gelegt und mit einer Verschlussschiene verschlossen. Beim anschließenden Schrumpfen dichtet der innenseitige Heißschmelzkleber die Schadstelle wasserdicht ab und gleicht dabei zusätzlich Unebenheiten des Kabeluntergrundes aus.
Lieske Part No.: 935268

Dickwandig: sehr guter Abrieb-, Knick- und Schnittschutz. 4:1 deckt großen Anwendungsbereich ab, hoher Anpressdruck. Thermoplastischer Innenkleber zum Schutz gegen äußere Einflüsse und zur Zugentlastung. Thermochromatische Punkte (TCP) als Schrumpfindikator. Verschlussschiene ermöglicht Kabelreparatur ohne Kabelende. Beständig gegen Chemikalien und Erdalkalien. Hohe Witterungsbeständigkeit. halogenfrei. Verpackung im Set für eine einfache Handhabung. RMS Kabelreparaturmanschetten werden um die betroffene Stelle gelegt und mit einer Verschlussschiene verschlossen. Beim anschließenden Schrumpfen dichtet der innenseitige Heißschmelzkleber die Schadstelle wasserdicht ab und gleicht dabei zusätzlich Unebenheiten des Kabeluntergrundes aus.
Lieske Part No.: 928171

Dickwandig: sehr guter Abrieb-, Knick- und Schnittschutz. 4:1 deckt großen Anwendungsbereich ab, hoher Anpressdruck. Thermoplastischer Innenkleber zum Schutz gegen äußere Einflüsse und zur Zugentlastung. Thermochromatische Punkte (TCP) als Schrumpfindikator. Verschlussschiene ermöglicht Kabelreparatur ohne Kabelende. Beständig gegen Chemikalien und Erdalkalien. Hohe Witterungsbeständigkeit. halogenfrei. Verpackung im Set für eine einfache Handhabung. RMS Kabelreparaturmanschetten werden um die betroffene Stelle gelegt und mit einer Verschlussschiene verschlossen. Beim anschließenden Schrumpfen dichtet der innenseitige Heißschmelzkleber die Schadstelle wasserdicht ab und gleicht dabei zusätzlich Unebenheiten des Kabeluntergrundes aus.
Lieske Part No.: 928098

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 176 meters
Lieske Part No.: 1346801

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 176 meters
Lieske Part No.: 1131364

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 110 meters
Lieske Part No.: 1346794

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 110 meters
Lieske Part No.: 2058380

Schrumpfrate 3:1. Verfügbar in den Farben Schwarz, Blau, Rot, Weiß und Gelb. Sonderfarben auf Anfrage. Kabeldurchmesser 1 mm bis 39 mm. Gute mechanische Festigkeit und gute Beständigkeit gegen organische Lösungsmittel und Chemikalien. Hochflexibel. Lieferung in praktischen, wiederverschließbaren Kartons. TCGT ist ein 3:1 Schrumpfschlauch im Endlosformat, welcher beidseitig bedruckt werden kann. Dieser Schrumpfschlauch eignet sich hervorragend zur Kennzeichnung von Kabeln und Leitungen im Schaltschrankbau, in der Automatisationstechnik, Medizintechnik und in der Kabelkonfektion. Er wird auf handlichen Rollen geliefert. Diese passen optimal in die von HellermannTyton angebotenen Drucksysteme. Werden Schlauchzuschnitte benötigt, ist dies problemlos mit dem optionalen Schneide- oder Perforationsmesser möglich.
Sales unit: 110 meters
Lieske Part No.: 687530

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 110 pieces
Lieske Part No.: 1131351

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 72 meters
Lieske Part No.: 2058381

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 54 meters
Lieske Part No.: 2058382

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 54 meters
Lieske Part No.: 2058383

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 26 meters
Lieske Part No.: 1131365

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 26 meters
Lieske Part No.: 2058384

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 26 meters
Lieske Part No.: 2058385

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 26 meters
Lieske Part No.: 1346793

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 26 meters
Lieske Part No.: 1346792

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 26 meters
Lieske Part No.: 1346791

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 26 meters
Lieske Part No.: 1346790

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 10 meters
Lieske Part No.: 1131123

Shrink ratio 3:1. Available in black, blue, red, white and yellow. Special colors on request. Cable diameter 1 mm to 39 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TCGT is a 3:1 shrink tubing in continuous format that can be printed on both sides. This shrink tubing is ideal for labeling cables and lines in control cabinet construction, automation technology, medical technology and cable assembly. It is supplied on handy rolls. These fit perfectly into the printing systems offered by HellermannTyton. If tubing cuts are required, this can be done easily with the optional cutting or perforation knife.
Sales unit: 10 meters
Lieske Part No.: 2058386

Shrinkage ratio 3:1. Available in black, blue, red, white and yellow. Cable diameter 39 mm to 1 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TULT is a UL-listed 3:1 shrink tube marker in continuous format that can be printed on both sides. Consisting of a polyolefin compound, it has good mechanical strength and resistance to organic solvents and chemicals. Thanks to the special surface treatment, excellent printing results are always achieved. This shrink tube is ideal for marking cables and lines in control cabinet construction, for military equipment applications, in automation technology, medical technology, the automotive industry and in cable assembly. For optimal printing results, we recommend using our thermal transfer printing systems and ribbons. With the appropriate accessories, the shrink tube can be perforated or cut to specified lengths directly during the printing process.
Sales unit: 176 meters
Lieske Part No.: 1346789

TULT - 3: 1 UL listed heat shrinkable markers, Article number: 553-40351
TULT - 3: 1 UL listed heat shrinkable markers
Features:
Shrink ratio 3: 1
Available in the colors black, blue, red, white and yellow
cable diameter 39 mm to 1 mm
Good mechanical strength and good resistance to organic solvents and chemicals
Highly flexible
Meets UL224 VW-1 and CSA requirements
Delivery in practical, reclosable carton
Simple label design with the TagPrint Pro software
application
TULT is a UL listed 3: 1 ratio heat shrinkable, which can be printed on both sides. This shrink tubing is ideal for the identification of cables and wires in the switch cabinet, military equipment applications in the Automation technology, medical technology, the automotive industry and in cable assembly.
Printer: TrakMark DS, TT4000 + and TT430
Ribbons: TTRC +, TTDTHOUT, TTRW, TT822OUT8
accessories for TrakMark DS and TT4000 +: perforation (P4000) and cutter (S4000)
Accessories for the TT430: perforation (P430) and cutter (S430)
software: TagPrint Pro
Sales unit: 176 meters
Lieske Part No.: 705813

Shrinkage ratio 3:1. Available in black, blue, red, white and yellow. Cable diameter 39 mm to 1 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TULT is a UL-listed 3:1 shrink tube marker in continuous format that can be printed on both sides. Consisting of a polyolefin compound, it has good mechanical strength and resistance to organic solvents and chemicals. Thanks to the special surface treatment, excellent printing results are always achieved. This shrink tube is ideal for marking cables and lines in control cabinet construction, for military equipment applications, in automation technology, medical technology, the automotive industry and in cable assembly. For optimal printing results, we recommend using our thermal transfer printing systems and ribbons. With the appropriate accessories, the shrink tube can be perforated or cut to specified lengths directly during the printing process.
Sales unit: 110 meters
Lieske Part No.: 1131122

Shrinkage ratio 3:1. Available in black, blue, red, white and yellow. Cable diameter 39 mm to 1 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TULT is a UL-listed 3:1 shrink tube marker in continuous format that can be printed on both sides. Consisting of a polyolefin compound, it has good mechanical strength and resistance to organic solvents and chemicals. Thanks to the special surface treatment, excellent printing results are always achieved. This shrink tube is ideal for marking cables and lines in control cabinet construction, for military equipment applications, in automation technology, medical technology, the automotive industry and in cable assembly. For optimal printing results, we recommend using our thermal transfer printing systems and ribbons. With the appropriate accessories, the shrink tube can be perforated or cut to specified lengths directly during the printing process.
Sales unit: 110 meters
Lieske Part No.: 1131121

Shrinkage ratio 3:1. Available in black, blue, red, white and yellow. Cable diameter 39 mm to 1 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TULT is a UL-listed 3:1 shrink tube marker in continuous format that can be printed on both sides. Consisting of a polyolefin compound, it has good mechanical strength and resistance to organic solvents and chemicals. Thanks to the special surface treatment, excellent printing results are always achieved. This shrink tube is ideal for marking cables and lines in control cabinet construction, for military equipment applications, in automation technology, medical technology, the automotive industry and in cable assembly. For optimal printing results, we recommend using our thermal transfer printing systems and ribbons. With the appropriate accessories, the shrink tube can be perforated or cut to specified lengths directly during the printing process.
Sales unit: 72 meters
Lieske Part No.: 1344612

TULT - 3: 1 UL listed heat shrinkable markers, Article number: 553-40951
TULT - 3: 1 UL listed heat shrinkable markers
Features:
Shrink ratio 3: 1
Available in the colors black, blue, red, white and yellow
cable diameter 39 mm to 1 mm
Good mechanical strength and good resistance to organic solvents and chemicals
Highly flexible
Meets UL224 VW-1 and CSA requirements
Delivery in practical, reclosable carton
Simple label design with the TagPrint Pro software
application
TULT is a UL listed 3: 1 ratio heat shrinkable, which can be printed on both sides. This shrink tubing is ideal for the identification of cables and wires in the switch cabinet, military equipment applications in the Automation technology, medical technology, the automotive industry and in cable assembly.
Printer: TrakMark DS, TT4000 + and TT430
Ribbons: TTRC +, TTDTHOUT, TTRW, TT822OUT8
accessories for TrakMark DS and TT4000 +: perforation (P4000) and cutter (S4000)
Accessories for the TT430: perforation (P430) and cutter (S430)
software: TagPrint Pro
Sales unit: 72 meters
Lieske Part No.: 705900

Shrinkage ratio 3:1. Available in black, blue, red, white and yellow. Cable diameter 39 mm to 1 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TULT is a UL-listed 3:1 shrink tube marker in continuous format that can be printed on both sides. Consisting of a polyolefin compound, it has good mechanical strength and resistance to organic solvents and chemicals. Thanks to the special surface treatment, excellent printing results are always achieved. This shrink tube is ideal for marking cables and lines in control cabinet construction, for military equipment applications, in automation technology, medical technology, the automotive industry and in cable assembly. For optimal printing results, we recommend using our thermal transfer printing systems and ribbons. With the appropriate accessories, the shrink tube can be perforated or cut to specified lengths directly during the printing process.
Sales unit: 54 meters
Lieske Part No.: 1131120

Shrinkage ratio 3:1. Available in black, blue, red, white and yellow. Cable diameter 39 mm to 1 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TULT is a UL-listed 3:1 shrink tube marker in continuous format that can be printed on both sides. Consisting of a polyolefin compound, it has good mechanical strength and resistance to organic solvents and chemicals. Thanks to the special surface treatment, excellent printing results are always achieved. This shrink tube is ideal for marking cables and lines in control cabinet construction, for military equipment applications, in automation technology, medical technology, the automotive industry and in cable assembly. For optimal printing results, we recommend using our thermal transfer printing systems and ribbons. With the appropriate accessories, the shrink tube can be perforated or cut to specified lengths directly during the printing process.
Sales unit: 26 meters
Lieske Part No.: 1344611

Shrinkage ratio 3:1. Available in black, blue, red, white and yellow. Cable diameter 39 mm to 1 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TULT is a UL-listed 3:1 shrink tube marker in continuous format that can be printed on both sides. Consisting of a polyolefin compound, it has good mechanical strength and resistance to organic solvents and chemicals. Thanks to the special surface treatment, excellent printing results are always achieved. This shrink tube is ideal for marking cables and lines in control cabinet construction, for military equipment applications, in automation technology, medical technology, the automotive industry and in cable assembly. For optimal printing results, we recommend using our thermal transfer printing systems and ribbons. With the appropriate accessories, the shrink tube can be perforated or cut to specified lengths directly during the printing process.
Sales unit: 26 meters
Lieske Part No.: 541968

Shrinkage ratio 3:1. Available in black, blue, red, white and yellow. Cable diameter 39 mm to 1 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TULT is a UL-listed 3:1 shrink tube marker in continuous format that can be printed on both sides. Consisting of a polyolefin compound, it has good mechanical strength and resistance to organic solvents and chemicals. Thanks to the special surface treatment, excellent printing results are always achieved. This shrink tube is ideal for marking cables and lines in control cabinet construction, for military equipment applications, in automation technology, medical technology, the automotive industry and in cable assembly. For optimal printing results, we recommend using our thermal transfer printing systems and ribbons. With the appropriate accessories, the shrink tube can be perforated or cut to specified lengths directly during the printing process.
Sales unit: 26 meters
Lieske Part No.: 622196

Shrinkage ratio 3:1. Available in black, blue, red, white and yellow. Cable diameter 39 mm to 1 mm. Good mechanical strength and good resistance to organic solvents and chemicals. Highly flexible. Supplied in practical, resealable boxes. TULT is a UL-listed 3:1 shrink tube marker in continuous format that can be printed on both sides. Consisting of a polyolefin compound, it has good mechanical strength and resistance to organic solvents and chemicals. Thanks to the special surface treatment, excellent printing results are always achieved. This shrink tube is ideal for marking cables and lines in control cabinet construction, for military equipment applications, in automation technology, medical technology, the automotive industry and in cable assembly. For optimal printing results, we recommend using our thermal transfer printing systems and ribbons. With the appropriate accessories, the shrink tube can be perforated or cut to specified lengths directly during the printing process.
Sales unit: 10 meters
Lieske Part No.: 1131119

Schrumpfrate 2:1. Halogenfrei. Erfüllt die höchsten Standards in Bezug auf Entflammbarkeit. Niedrige Rauchausbreitung, Dichte und Toxizität. Hoher Sauerstoffindex. Verfügbar in den Farben Weiß oder Gelb. Sonderfarben auf Anfrage. Kabeldurchmesser 1,2 mm bis 50,8 mm. Lieferung in praktischen, wiederverschließbaren Kartons. TLFX ist ein halogenfreier 2:1 Schrumpfschlauch, welcher die Anforderungen für die Bahnindustrie erfüllt. TLFX eignet sich vor allem für die Markierung von Leitungen in öffentlichen Gebäuden (beispielsweise Flughäfen, Krankenhäuser) und Verkehrsmitteln (beispielsweise Schienenfahrzeuge, Schiffe, Flugzeuge) sowie Tunnelbauten. Für optimale Druckergebnisse empfehlen wir die Verwendung unserer Thermotransferdrucksysteme und Farbbänder. Mit dem entsprechenden Zubehör ist während des Druckvorgangs direkt das Perforieren oder Abschneiden des Schrumpfschlauches auf vorgegebene Längen möglich.
Lieske Part No.: 941164

Shrink ratio 2:1. Halogen-free. Meets the highest standards in terms of flammability. Low smoke spread, density and toxicity. High oxygen index. Available in white or yellow. Special colors on request. Cable diameter 1.2 mm to 50.8 mm. Supplied in practical, resealable boxes. TLFX is a halogen-free 2:1 shrink tubing that meets the requirements of the rail industry. TLFX is particularly suitable for marking cables in public buildings (e.g. airports, hospitals) and means of transport (e.g. rail vehicles, ships, aircraft) as well as tunnels. For optimal printing results, we recommend using our thermal transfer printing systems and ribbons. With the appropriate accessories, the shrink tubing can be perforated or cut to specified lengths directly during the printing process.
Lieske Part No.: 2112201

Speziell UV-stabilisierte Kennzeichnungsschilder. Robustes und flexibles Material. Bedruckbar mit Thermotransfer- oder Laserstrahldrucker. Erhältlich in vielen verschiedenen Farben. Sonderfarben auf Anfrage. Halogenfrei. Hervorragende flexible und mechanische Eigenschaften. TAGPU sind bedruckbare Kennzeichnungsschilder aus flexiblem und widerstandsfähigem Polyurethan. Sie sind ideal für die Kennzeichnung von Kabeln und Leitungen einsetzbar, bei denen eine dauerhaft lesbare und gegen UV-Licht beständige Beschriftung gefordert wird. TAGPU ist für den Einsatz in widriger Umgebung geeignet, wie beispielsweise für Anwendungen an Solaranlagen, Hydraulikschläuchen sowie an Kompostieranlagen. Auch für die nachträgliche Montage können die Markierer optimal verwendet werden. Da TAGPU in einem praktischen 'Leiterformat' geliefert wird, eignet er sich hervorragend für die Bedruckung mit Thermotransferdruckern oder Laserstrahlsystemen. Die Markierer können mit Kabelbindern mit einer Breite bis maximal 4,7 mm verarbeitet werden. Für optimale Druckergebnisse empfehlen wir die Verwendung unserer Thermotransferdrucker und Farbbänder oder eines Laserstrahlsystems.
Sales unit: 1000 pieces
Lieske Part No.: 705723

Speziell UV-stabilisierte Kennzeichnungsschilder. Robustes und flexibles Material. Bedruckbar mit Thermotransfer- oder Laserstrahldrucker. Erhältlich in vielen verschiedenen Farben. Sonderfarben auf Anfrage. Halogenfrei. Hervorragende flexible und mechanische Eigenschaften. TAGPU sind bedruckbare Kennzeichnungsschilder aus flexiblem und widerstandsfähigem Polyurethan. Sie sind ideal für die Kennzeichnung von Kabeln und Leitungen einsetzbar, bei denen eine dauerhaft lesbare und gegen UV-Licht beständige Beschriftung gefordert wird. TAGPU ist für den Einsatz in widriger Umgebung geeignet, wie beispielsweise für Anwendungen an Solaranlagen, Hydraulikschläuchen sowie an Kompostieranlagen. Auch für die nachträgliche Montage können die Markierer optimal verwendet werden. Da TAGPU in einem praktischen 'Leiterformat' geliefert wird, eignet er sich hervorragend für die Bedruckung mit Thermotransferdruckern oder Laserstrahlsystemen. Die Markierer können mit Kabelbindern mit einer Breite bis maximal 4,7 mm verarbeitet werden. Für optimale Druckergebnisse empfehlen wir die Verwendung unserer Thermotransferdrucker und Farbbänder oder eines Laserstrahlsystems.
Sales unit: 1000 pieces
Lieske Part No.: 705725

Specially UV-stabilized labels. Robust and flexible material. Can be printed with thermal transfer or laser printers. Available in many different colors. Special colors on request. Halogen-free. Excellent flexible and mechanical properties. TAGPU are printable labels made of flexible and durable polyurethane. They are ideal for marking cables and lines where permanently legible and UV-resistant labeling is required. TAGPU is suitable for use in adverse environments, such as for applications on solar systems, hydraulic hoses and composting plants. The markers can also be used optimally for subsequent installation. Since TAGPU is supplied in a practical ladder format, it is ideal for printing with thermal transfer printers or laser beam systems. The markers can be processed with cable ties with a maximum width of 4.7 mm. For optimal printing results, we recommend using our thermal transfer printers and ribbons or a laser beam system.
Sales unit: 1000 pieces
Lieske Part No.: 2058161

Specially UV-stabilized labels. Robust and flexible material. Can be printed with thermal transfer or laser printers. Available in many different colors. Special colors on request. Halogen-free. Excellent flexible and mechanical properties. TAGPU are printable labels made of flexible and durable polyurethane. They are ideal for marking cables and lines where permanently legible and UV-resistant labeling is required. TAGPU is suitable for use in adverse environments, such as for applications on solar systems, hydraulic hoses and composting plants. The markers can also be used optimally for subsequent installation. Since TAGPU is supplied in a practical ladder format, it is ideal for printing with thermal transfer printers or laser beam systems. The markers can be processed with cable ties with a maximum width of 4.7 mm. For optimal printing results, we recommend using our thermal transfer printers and ribbons or a laser beam system.
Sales unit: 1000 pieces
Lieske Part No.: 2058172

Specially UV-stabilized labels. Robust and flexible material. Can be printed with thermal transfer or laser printers. Available in many different colors. Special colors on request. Halogen-free. Excellent flexible and mechanical properties. TAGPU are printable labels made of flexible and durable polyurethane. They are ideal for marking cables and lines where permanently legible and UV-resistant labeling is required. TAGPU is suitable for use in adverse environments, such as for applications on solar systems, hydraulic hoses and composting plants. The markers can also be used optimally for subsequent installation. Since TAGPU is supplied in a practical ladder format, it is ideal for printing with thermal transfer printers or laser beam systems. The markers can be processed with cable ties with a maximum width of 4.7 mm. For optimal printing results, we recommend using our thermal transfer printers and ribbons or a laser beam system.
Sales unit: 1000 pieces
Lieske Part No.: 2058164