Plug-in cable gland, orange, RAL 2003 for M 32 knockouts. Sealing range Ø 8-23 mm.
Lieske Part No.: 192968

Stepped connector for cable entry with sealing range Ø 30-72 mm. For retrofitting a Mi cable insert.
Lieske Part No.: 173093

Cable entry for floor knockouts M 32. Sealing range Ø 12-24 mm.
Lieske Part No.: 739372

Plug-in cable gland, orange, RAL 2003 for M 25 knockouts. Sealing range Ø 9-17 mm.
Lieske Part No.: 1013644

Insert plug for retrofitting
for cable junction boxes DP 90. and DP 92.,
IP 54, for cable diameter
10-13.5 mm

for:

DP 9020, DP 9025, DP 9220, DP 9221, DP 9222 Type: DPS02


Quantity: 1 unit.
Sales unit: 50 pieces
Lieske Part No.: 349133

Insert socket, closed, for pre-knockouts PG 11 and sealing range Ø 9-13 mm.
Lieske Part No.: 512305

Levels spigots metric
Degree of protection IP 55

Model: M 20, 5-16 mm Type: STM20


Quantity: 1 unit.
Sales unit: 20 pieces
Lieske Part No.: 613851

Levels spigot metric protection IP 55 Design: 25 M, 5-2
mm Type: STM25 item:
ST.
Sales unit: 20 pieces
Lieske Part No.: 736000

Levels spigot metric protection IP 55 Design: M 32,
3 to 26.5 mm Type: STM32 item:
ST.
Sales unit: 10 pieces
Lieske Part No.: 939312

Reduction, with O-ring, Pg 21 Pg 13.5
Sales unit: 10 pieces
Lieske Part No.: 754151

Reduction, with O-ring, Pg 21 Pg 16
Sales unit: 10 pieces
Lieske Part No.: 808243

Reduction, with O-ring, Pg 29 Pg 21
Sales unit: 10 pieces
Lieske Part No.: 838097

Reduced size
Sales unit: 10 pieces
Lieske Part No.: 840468

Reduced size
Sales unit: 10 pieces
Lieske Part No.: 677375

Blind plug, with O-ring, M25, wrench size: 28, metal
Sales unit: 10 pieces
Lieske Part No.: 377874

Blind plug, with O-ring, M32, wrench size: 35, metal
Sales unit: 10 pieces
Lieske Part No.: 768907

Blind plug, with O-ring, M40, wrench size: 44, metal
Sales unit: 10 pieces
Lieske Part No.: 134064

With integrated lid

- Internal ribs prevent slippage of the hose type: PACC13 PA66 BK 10 ST item: 10 ST.
Sales unit: 10 pieces
Lieske Part No.: 765938

Type: PACC16-PA66-BK-10ST
Sales unit: 10 pc
Sales unit: 10 pieces
Lieske Part No.: 435219

Type: PACC21-PA66-BK-10ST
Sales unit: 10 pc
Sales unit: 10 pieces
Lieske Part No.: 108690

With integrated lid

- Internal ribs prevent slippage of the hose type: PACC28 PA66 BK 10 ST item: 10 ST.
Sales unit: 10 pieces
Lieske Part No.: 384769

With integrated lid

- Internal ribs prevent slippage of the hose type: PACC34 PA66 BK 10 ST item: 10 ST.
Sales unit: 10 pieces
Lieske Part No.: 302668

With integrated lid

- Internal ribs prevent slippage of the hose type: PACC42 PA66 BK 5 ST item: 5 ST.
Sales unit: 5 pieces
Lieske Part No.: 163418

Type: PACC54 PA66 BK 5 ST
Sales unit: 5 pc
Sales unit: 5 pieces
Lieske Part No.: 390846

Type: PACC10 PA66 BK 10 ST
Sales unit: 10 pc
Sales unit: 10 pieces
Lieske Part No.: 775629

The hexagonal ALSS lock nut serves as additional security for the screw connection.
Sales unit: 10 pieces
Lieske Part No.: 1563408

The hexagonal ALSS lock nut serves as additional security for the screw connection.
Sales unit: 10 pieces
Lieske Part No.: 1563407

The hexagonal ALPA lock nut serves as additional security for the screw connection.
Sales unit: 10 pieces
Lieske Part No.: 1563406

Protection against water and dust. For PG and metric threads. Oil-resistant. Compressive strength (80 A Shore hardness).
Sales unit: 10 pieces
Lieske Part No.: 1319341

Thread converter. Thread reducers and enlargers. Converters between metric and PG threads. The range includes thread converters as well as thread reducers and enlargers.
Sales unit: 10 pieces
Lieske Part No.: 1236095

Type: G51PAA PE NA 1 RO
Sales unit: 1 pc
Lieske Part No.: 874604

Flexiform edge protection
Highly flexible edge protection for applications where cables or wires
through sharp-edged cut-outs (eg sheets) must be performed.
edge protection, polyethylene
Color: Natural
for sheet metal thickness: 1,3-2,4 Type: G51P-B-PE-NA


Quantity: 1 unit.
Lieske Part No.: 621448

Of the U-profile open toothed, highly flexible edge protection is simply applied to the panel edge and pass-to-bumper processed without sticking. With the tight shape of the rail Flexiform edge protection for cables, mechanical protection is achieved. Type: G51P-D-PE-NA Quantity: 1 ea.
Lieske Part No.: 366809

Very flexible. Easy and safe to process without glue. Offers effective and visually clean protection. Flexiform G51P made of polyethylene (PE) is the all-purpose edge protection. Flexiform G51N made of polyamide 6 (PA6) offers very good abrasion protection. Flexiform G51T made of polytetrafluoroethylene (PTFE) has excellent resistance to high temperatures and many chemicals. Flexiform edge protection is used to protect cables or lines that have to be routed through sheet metal cuts or hard-edged punched outlets in chassis or device construction.
Lieske Part No.: 964875

Of the U-profile open toothed, highly flexible edge protection is simply applied to the panel edge and pass-to-bumper processed without sticking. With the tight shape of the rail Flexiform edge protection for cables, mechanical protection is achieved. Type: G5
PG-PE-NA Quantity:
ST.
Lieske Part No.: 780634

Of the U-profile open toothed, highly flexible edge protection is simply applied to the panel edge and pass-to-bumper processed without sticking. With the tight shape of the rail Flexiform edge protection for cables, mechanical protection is achieved. Type: G5
PH-PE-NA Quantity:
ST.
Lieske Part No.: 968116

Very flexible. Easy and safe to process without adhesive. Very good abrasion resistance. Tight-fitting molded rail. Visually clean protection. Flexiform edge protection is used to protect cables or lines that have to be routed through sheet metal cuts or hard-edged punching exits in chassis or device construction.
Lieske Part No.: 359692

Very flexible. Easy and safe to process without adhesive. Very good abrasion resistance. Tight-fitting molded rail. Visually clean protection. Flexiform edge protection is used to protect cables or lines that have to be routed through sheet metal cuts or hard-edged punching exits in chassis or device construction.
Lieske Part No.: 733158

Very flexible. Easy and safe to process without adhesive. Very good abrasion resistance. Tight-fitting molded rail. Visually clean protection. Flexiform edge protection is used to protect cables or lines that have to be routed through sheet metal cuts or hard-edged punching exits in chassis or device construction.
Lieske Part No.: 556303

Very flexible. Easy and safe to process without adhesive. Very good abrasion resistance. Tight-fitting molded rail. Visually clean protection. Flexiform edge protection is used to protect cables or lines that have to be routed through sheet metal cuts or hard-edged punching exits in chassis or device construction.
Lieske Part No.: 443739

Very flexible. Easy and safe to process without adhesive. Very good abrasion resistance. Tight-fitting molded rail. Visually clean protection. Flexiform edge protection is used to protect cables or lines that have to be routed through sheet metal cuts or hard-edged punching exits in chassis or device construction.
Lieske Part No.: 148313

Type: G51NF PA6 NA 1 RO
Sales unit: 1 pc
Lieske Part No.: 957947

Very flexible. Easy and safe to process without adhesive. Very good abrasion resistance. Tight-fitting molded rail. Visually clean protection. Flexiform edge protection is used to protect cables or lines that have to be routed through sheet metal cuts or hard-edged punching exits in chassis or device construction.
Sales unit: 10 pieces
Lieske Part No.: 1580405

Type: G51TA PTFE NA 1 RO
Sales unit: 1 pc
Lieske Part No.: 951930

Type: G51TC PTFE NA 1 RO
Sales unit: 1 pc
Lieske Part No.: 734329

Of the U-profile open toothed, highly flexible edge protection is simply applied to the panel edge and pass-on-shock processed without sticking. With the tight shape of the rail Flexiform edge protection for cables, mechanical protection is achieved. Type: G5
TG-PTFE-NA Quantity:
ST.
Lieske Part No.: 108000

The voltage-resistant end caps with thermoplastic adhesive inner seal cables reliably and durably. The durable material protects against mechanical stresses. The high shrink ratio allows it to cover a large cross-sectional area with only a few sizes.
HellermannTyton end caps can be fitted on request also with air valves for pneumatic monitored telecommunications cable systems. Model: 1612-1 B8W-BK-item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 428820

Fast and easy processing. Robust material protects against mechanical stress. Thermoplastic inner adhesive for protection against external influences and for strain relief. Advantageous shrinkage rate for a wide range of applications. Also available with air valves for compressed air-monitored telecommunications cable systems on request. Helashrink end caps are used to seal cable ends indoors and outdoors and are suitable for all common plastic-insulated cables with a mains voltage of 0.6 - 1 kV.
Lieske Part No.: 1242555

Sales Unit: 250 ST.
Sales unit: 250 pieces
Lieske Part No.: 380927

Sales Unit: 200 ST.
Sales unit: 100 pieces
Lieske Part No.: 592555