Locknut SKINTOP® GMP-GL-M 50X1.5 RAL 7035 LGY, locknut, M 50, wrench size: 60mm, light gray, polyamide, halogen-free, , Areas of application: Black versions are UV-resistant and therefore well suited for outdoor use,For thin-walled housings without a thread that only allow one through hole,For locking a SKINTOP® /SKINDICHT® cable gland on the inside of the application (e.g. housing),Good oil and chemical resistance, Benefits: Contact surface facilitates easy assembly using an open-end wrench and at the same time protects a housing from scratches,Self-extinguishing in accordance with UL94 V-2 (flammability test for plastics),High stability thanks to glass fiber reinforced polyamide,UL certification in accordance with technical data enables use of the product in North America (only valid in combination with a UL-approved SKINTOP® cable gland made of plastic)
Lieske Part No.: 423134

Locknut SKINTOP® GMP-GL-M 63X1.5 RAL 7001 SGY, locknut, M 63, wrench size: 75mm, silver gray, polyamide, halogen-free, , Areas of application: Black versions are UV-resistant and therefore well suited for outdoor use,For thin-walled housings without a thread that only allow one through hole,For locking a SKINTOP® /SKINDICHT® cable gland on the inside of the application (e.g. housing),Good oil and chemical resistance, Benefits: Contact surface facilitates easy assembly using an open-end wrench and at the same time protects a housing from scratches,Self-extinguishing in accordance with UL94 V-2 (flammability test for plastics),High stability thanks to glass fiber reinforced polyamide,UL certification in accordance with technical data enables use of the product in North America (only valid in combination with a UL-approved SKINTOP® cable gland made of plastic)
Lieske Part No.: 387188

Locknut SKINTOP® GMP-GL-M 63X1.5 RAL 7035 LGY, locknut, M 63, wrench size: 75mm, light gray, polyamide, halogen-free, , Areas of application: Black versions are UV-resistant and therefore well suited for outdoor use,For thin-walled housings without a thread that only allow one through hole,For locking a SKINTOP® /SKINDICHT® cable gland on the inside of the application (e.g. housing),Good oil and chemical resistance, Benefits: Contact surface facilitates easy assembly using an open-end wrench and at the same time protects a housing from scratches,Self-extinguishing in accordance with UL94 V-2 (flammability test for plastics),High stability thanks to glass fiber reinforced polyamide,UL certification in accordance with technical data enables use of the product in North America (only valid in combination with a UL-approved SKINTOP® cable gland made of plastic)
Lieske Part No.: 812670

Locknut SKINTOP® GMP-GL-M 12X1.5 RAL 9005 BK, locknut, M 12, wrench size: 17mm, black, polyamide, halogen-free, UV-resistant, Areas of application: Black versions are UV-resistant and therefore well suited for outdoor use, For thin-walled housings without threads that only allow one through hole, For locking a SKINTOP® / SKINDICHT® cable gland on the inside of the application (e.g. housing), Good oil and chemical resistance, Benefits: Contact surface facilitates easy assembly using an open-end wrench and at the same time protects a housing from scratches, Self-extinguishing according to UL94 V-2 (flammability test for plastics), High stability thanks to glass fiber reinforced polyamide, UL certification according to technical data enables use of the product in North America (only valid in combination with a UL-approved SKINTOP® cable gland made of plastic)
Sales unit: 100 pieces
Lieske Part No.: 722902

Locknut SKINTOP® GMP-GL-M 16X1.5 RAL 9005 BK, locknut, M 16, wrench size: 22mm, black, polyamide, halogen-free, UV-resistant, Areas of application: Black versions are UV-resistant and therefore well suited for outdoor use, For thin-walled housings without threads that only allow one through hole, For locking a SKINTOP® / SKINDICHT® cable gland on the inside of the application (e.g. housing), Good oil and chemical resistance, Benefits: Contact surface facilitates easy assembly using an open-end wrench and at the same time protects a housing from scratches, Self-extinguishing according to UL94 V-2 (flammability test for plastics), High stability thanks to glass fiber reinforced polyamide, UL certification according to technical data enables use of the product in North America (only valid in combination with a UL-approved SKINTOP® cable gland made of plastic)
Lieske Part No.: 930478

Locknut SKINTOP® GMP-GL-M 20X1.5 RAL 9005 BK, locknut, M 20, wrench size: 27mm, black, polyamide, halogen-free, UV-resistant, Areas of application: Black versions are UV-resistant and therefore well suited for outdoor use, For thin-walled housings without threads that only allow one through hole, For locking a SKINTOP® / SKINDICHT® cable gland on the inside of the application (e.g. housing), Good oil and chemical resistance, Benefits: Contact surface facilitates easy assembly using an open-end wrench and at the same time protects a housing from scratches, Self-extinguishing according to UL94 V-2 (flammability test for plastics), High stability thanks to glass fiber reinforced polyamide, UL certification according to technical data enables use of the product in North America (only valid in combination with a UL-approved SKINTOP® cable gland made of plastic)
Lieske Part No.: 169723

Locknut SKINTOP® GMP-GL-M 25X1.5 RAL 9005 BK, locknut, M 25, wrench size: 34mm, black, polyamide, halogen-free, UV-resistant, Areas of application: Black versions are UV-resistant and therefore well suited for outdoor use, For thin-walled housings without threads that only allow one through hole, For locking a SKINTOP® / SKINDICHT® cable gland on the inside of the application (e.g. housing), Good oil and chemical resistance, Benefits: The contact surface facilitates easy assembly using an open-end wrench and at the same time protects a housing from scratches, Self-extinguishing in accordance with UL94 V-2 (flammability test for plastics), High stability thanks to glass fiber reinforced polyamide, UL certification in accordance with technical data enables the product to be used in North America (only valid in combination with a UL-approved SKINTOP® cable gland made of plastic)
Lieske Part No.: 299821

Locknut SKINTOP® GMP-GL-M 32X1.5 RAL 9005 BK, locknut, M 32, wrench size: 41mm, black, polyamide, halogen-free, UV-resistant, Areas of application: Black versions are UV-resistant and therefore well suited for outdoor use, For thin-walled housings without a thread that only allow one through hole, For locking a SKINTOP® / SKINDICHT® cable gland on the inside of the application (e.g. housing), Good oil and chemical resistance, Benefits: The contact surface facilitates easy assembly using an open-end wrench and at the same time protects a housing from scratches, Self-extinguishing in accordance with UL94 V-2 (flammability test for plastics), High stability thanks to glass fiber reinforced polyamide, UL certification in accordance with technical data enables the product to be used in North America (only valid in combination with a UL-approved SKINTOP® cable gland made of plastic)
Lieske Part No.: 553514

Locknut SKINTOP® GMP-GL-M 40X1.5 RAL 9005 BK, locknut, M 40, wrench size: 50mm, black, polyamide, halogen-free, UV-resistant, Areas of application: Black versions are UV-resistant and therefore well suited for outdoor use, For thin-walled housings without a thread that only allow one through hole, For locking a SKINTOP® / SKINDICHT® cable gland on the inside of the application (e.g. housing), Good oil and chemical resistance, Benefits: The contact surface facilitates easy assembly using an open-end wrench and at the same time protects a housing from scratches, Self-extinguishing in accordance with UL94 V-2 (flammability test for plastics), High stability thanks to glass fiber reinforced polyamide, UL certification in accordance with technical data enables the product to be used in North America (only valid in combination with a UL-approved SKINTOP® cable gland made of plastic)
Lieske Part No.: 297994

Locknut SKINTOP® GMP-GL-M 50X1.5 RAL 9005 BK, locknut, M 50, wrench size: 60mm, black, polyamide, halogen-free, UV-resistant, Areas of application: Black versions are UV-resistant and therefore well suited for outdoor use, For thin-walled housings without a thread that only allow one through hole, For locking a SKINTOP® / SKINDICHT® cable gland on the inside of the application (e.g. housing), Good oil and chemical resistance, Benefits: The contact surface facilitates easy assembly using an open-end wrench and at the same time protects a housing from scratches, Self-extinguishing in accordance with UL94 V-2 (flammability test for plastics), High stability thanks to glass fiber reinforced polyamide, UL certification in accordance with technical data enables the product to be used in North America (only valid in combination with a UL-approved SKINTOP® cable gland made of plastic)
Sales unit: 25 pieces
Lieske Part No.: 235391

Locknut SKINTOP® GMP-GL-M 63X1.5 RAL 9005 BK, locknut, M 63, wrench size: 75mm, black, polyamide, halogen-free, UV-resistant, Areas of application: Black versions are UV-resistant and therefore well suited for outdoor use, For thin-walled housings without a thread that only allow one through hole, For locking a SKINTOP® / SKINDICHT® cable gland on the inside of the application (e.g. housing), Good oil and chemical resistance, Benefits: The contact surface facilitates easy assembly using an open-end wrench and at the same time protects a housing from scratches, Self-extinguishing in accordance with UL94 V-2 (flammability test for plastics), High stability thanks to glass fiber reinforced polyamide, UL certification in accordance with technical data enables the product to be used in North America (only valid in combination with a UL-approved SKINTOP® cable gland made of plastic)
Sales unit: 25 pieces
Lieske Part No.: 848187

Locknut SKINTOP® GMP-HF-M 12X1.5 RAL7035 LGY, locknut, M 12, wrench size: 17mm, light grey, polyamide, halogen-free, , Application areas: subways, airports, public buildings, tunnels, Benefits: halogen-free, extremely flame-retardant according to UL 94 V0, self-extinguishing, no dripping
Sales unit: 100 pieces
Lieske Part No.: 1242740

Locknut SKINTOP® GMP-HF-M 63X1.5 RAL7035 LGY, locknut, M 63, wrench size: 75mm, light grey, polyamide, halogen-free, , Application areas: subways, airports, public buildings, tunnels, Benefits: halogen-free, extremely flame-retardant according to UL 94 V0, self-extinguishing, no drop formation
Sales unit: 25 pieces
Lieske Part No.: 1243074

Multiple sealing insert SKINTOP® DIX-M 16230, Multiple sealing insert, M 16, Number of cable entries: 2 pieces, Bore diameter: 3 mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 100 pieces
Lieske Part No.: 458480

Multiple sealing insert SKINTOP® DIX-M 16240, Multiple sealing insert, M 16, Number of cable entries: 2 pieces, Bore diameter: 4 mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 100 pieces
Lieske Part No.: 644436

Multiple sealing insert SKINTOP® DIX-M 20250, Multiple sealing insert, M 20, Number of cable entries: 2 pieces, Bore diameter: 5 mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Lieske Part No.: 824545

Multiple sealing insert SKINTOP® DIX-M 20340, Multiple sealing insert, M 20, Number of cable entries: 3, Bore diameter: 4mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 100 pieces
Lieske Part No.: 757790

Multiple sealing insert SKINTOP® DIX-M 25250, Multiple sealing insert, M 25, Number of cable entries: 2 pieces, Bore diameter: 5 mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 50 pieces
Lieske Part No.: 1128807

Multiple sealing insert SKINTOP® DIX-M 25260, Multiple sealing insert, M 25, Number of cable entries: 2 pieces, Bore diameter: 6 mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Lieske Part No.: 474840

Multiple sealing insert SKINTOP® DIX-M 25360, Multiple sealing insert, M 25, Number of cable entries: 3, Bore diameter: 6mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 50 pieces
Lieske Part No.: 960836

Multiple sealing insert SKINTOP® DIX-M 25370, Multiple sealing insert, M 25, Number of cable entries: 3, Bore diameter: 7mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Lieske Part No.: 934001

Multiple sealing insert SKINTOP® DIX-M 25450, Multiple sealing insert, M 25, Number of cable entries: 4, Bore diameter: 5mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Lieske Part No.: 828285

Multiple sealing insert SKINTOP® DIX-M 25540, Multiple sealing insert, M 25, Number of cable entries: 5, Bore diameter: 4mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 50 pieces
Lieske Part No.: 504260

Multiple sealing insert SKINTOP® DIX-M 32280, Multiple sealing insert, M 32, Number of cable entries: 2 pieces, Bore diameter: 8 mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Lieske Part No.: 837359

Multiple sealing insert SKINTOP® DIX-M 32370, Multiple sealing insert, M 32, Number of cable entries: 3, Bore diameter: 7mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 50 pieces
Lieske Part No.: 544542

Multiple sealing insert SKINTOP® DIX-M 32380, Multiple sealing insert, M 32, Number of cable entries: 3, Bore diameter: 8mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Lieske Part No.: 442492

Multiple sealing insert SKINTOP® DIX-M 32460, Multiple sealing insert, M 32, Number of cable entries: 4, Bore diameter: 6mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 50 pieces
Lieske Part No.: 508180

Multiple sealing insert SKINTOP® DIX-M 32470, Multiple sealing insert, M 32, Number of cable entries: 4, Bore diameter: 7mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Lieske Part No.: 751299

Multiple sealing insert SKINTOP® DIX-M 32650, Multiple sealing insert, M 32, Number of cable entries: 6, Bore diameter: 5mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 50 pieces
Lieske Part No.: 657727

Multiple sealing insert SKINTOP® DIX-M 32840, Multiple sealing insert, M 32, Number of cable entries: 8, Bore diameter: 4mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 50 pieces
Lieske Part No.: 433758

Multiple sealing insert SKINTOP® DIX-M 40480, Multiple sealing insert, M 40, Number of cable entries: 4, Bore diameter: 8mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and are also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to ECOLAB® cleaning and disinfection agents and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant.
Sales unit: 25 pieces
Lieske Part No.: 678113

Multiple sealing insert SKINTOP® DIX-M 40969, Multiple sealing insert, M 40, Number of cable entries: 9, Bore diameter: 6.9mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP®/SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to cleaning and disinfection agents from ECOLAB® and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant
Lieske Part No.: 639759

Multiple sealing insert SKINTOP® DIX-M 50118, Multiple sealing insert, M 50, Number of cable entries: 11, Bore diameter: 8mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP®/SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to cleaning and disinfection agents from ECOLAB® and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant
Sales unit: 10 pieces
Lieske Part No.: 1132694

Multiple sealing insert SKINTOP® DIX-M 50164, Multiple sealing insert, M 50, Number of cable entries: 16, Bore diameter: 4mm, black, Areas of application: Suitable for outdoor use, For use with metric SKINTOP®/SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to cleaning and disinfection agents from ECOLAB® and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant
Sales unit: 10 pieces
Lieske Part No.: 1230615

Sales unit: 10 pieces
Lieske Part No.: 256491

Multiple sealing insert SKINTOP® DIX-M 20250 FKM, Multiple sealing insert, M 20, Number of cable entries: 2 pieces, Bore diameter: 5 mm, green, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to cleaning and disinfection agents from ECOLAB® and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant
Sales unit: 100 pieces
Lieske Part No.: 1319895

Multiple sealing insert SKINTOP® DIX-M 20260 FKM, Multiple sealing insert, M 20, Number of cable entries: 2 pieces, Bore diameter: 6 mm, green, Areas of application: Suitable for outdoor use, For use with metric SKINTOP® / SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and also oil-resistant They are extremely heat-resistant and suitable for use at extreme temperatures (up to +200 °C). The silicone variants are resistant to cleaning and disinfection agents from ECOLAB® and are chemically resistant in many ways. They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry. Their blue color makes them easy to distinguish from food. They are also extremely flexible at low temperatures and suitable for use at extreme temperatures (down to -50 °C). The NBR variants are oil-resistant
Sales unit: 100 pieces
Lieske Part No.: 1319894

Multiple sealing insert SKINTOP® DIX-M 40969 FKM, Multiple sealing insert, M 40, Number of cable entries: 9, Bore diameter: 6.9mm, green, Areas of application: Suitable for outdoor use, For use with metric SKINTOP®/SKINTOP® CLICK cable glands, Benefits: Gentle clamping of the cables due to the high elasticity of the sealing insert material, Easy insertion of several cables through a cable gland, Protection class IP 68 can be achieved provided that all holes are occupied by cables with a nominal diameter and unused openings are closed with SKINTOP® DIX-DV sealing closures, Multiple cable entries enable a higher packing density, Wide range of variants available, depending on the number and diameter of cables Made of acrylonitrile butadiene rubber (NBR), fluororubber (FKM) or silicone (SI)
, The FKM variants are resistant to aggressive media such as alkalis, acids, solvents and They are also oil-resistant They are extremely heat-resistant and suitable for use at extreme positive temperatures (up to +200 °C). The silicone variants are resistant to cleaning and disinfection agents from ECOLAB® and are chemically resistant in many ways They comply with FDA 21 CFR 1772600 and are therefore approved for the food and beverage industry Their blue color makes them easy to distinguish from food They are also extremely flexible at low temperatures and suitable for use at extreme minus temperatures (down to -50 °C). The NBR variants are oil-resistant
Sales unit: 25 pieces
Lieske Part No.: 1320167

Sealing insert SKINTOP® DIX-M 25190 SLOTTED, sealing insert, M 25, number of cable entries: 1pc., bore diameter: 9mm, black, areas of application: to be used instead of the standard sealing insert in the SKINTOP® cable gland, for use with metric SKINTOP®/SKINTOP® CLICK cable glands, UV and oil resistant material, benefits: protection class IP 68 can be achieved provided the bores are optimally occupied, high functional reliability thanks to optimal strain relief, special design with round pre-drilled hole and longitudinal cut for easy insertion of one or more pre-assembled data cables
Sales unit: 50 pieces
Lieske Part No.: 1867966

Multiple sealing insert SKINTOP® DIX 7225, Multiple sealing insert, PG 7, Number of cable entries: 2pcs., Bore diameter: 2.5mm, natural, Areas of application: Instead of the inner sealing insert, a seal with several holes is used, For use in SKINTOP® cable glands, Benefits: Increasing the packing density enables smaller dimensioned components, Easy routing of several cables through one screw connection
Sales unit: 100 pieces
Lieske Part No.: 737420

Multiple sealing insert SKINTOP® DIX 7417, Multiple sealing insert, PG 7, Number of cable entries: 4, Bore diameter: 1.7mm, natural, Areas of application: Instead of the inner sealing insert, a seal with several holes is used, For use in SKINTOP® cable glands, Benefits: Increasing the packing density enables smaller-sized components, Easy routing of several cables through one screw connection
Sales unit: 100 pieces
Lieske Part No.: 819763

Multiple sealing insert SKINTOP® DIX 9230, Multiple sealing insert, PG 9, Number of cable entries: 2 pieces, Bore diameter: 3 mm, natural, Areas of application: Instead of the inner sealing insert, a seal with several holes is used, For use in SKINTOP® cable glands, Benefits: Increasing the packing density enables smaller-sized components, Easy routing of several cables through one screw connection
Sales unit: 100 pieces
Lieske Part No.: 699626

Sealing insert SKINTOP® DIX ASI-M 20, sealing insert, M 20, number of cable entries: 1pc., black, areas of application: to be used instead of the standard sealing insert in the SKINTOP® cable gland, for use with metric SKINTOP®/SKINTOP® CLICK cable glands, UV and oil resistant material, benefits: protection class IP 68 can be achieved if the holes are optimally occupied, high functional reliability thanks to optimal strain relief
Sales unit: 50 pieces
Lieske Part No.: 296022

Multiple sealing insert SKINTOP® DIX 11225, Multiple sealing insert, PG 11, Number of cable entries: 2pcs., Bore diameter: 2.5mm, natural, Areas of application: Instead of the inner sealing insert, a seal with several holes is used, For use in SKINTOP® cable glands, Benefits: Increasing the packing density enables smaller dimensioned components, Easy routing of several cables through one screw connection
Sales unit: 100 pieces
Lieske Part No.: 616861

Multiple sealing insert SKINTOP® DIX 11240, multiple sealing insert, PG 11, number of cable entries: 2 pieces, bore diameter: 4 mm, natural, areas of application: instead of the inner sealing insert, a seal with several bores is used, for use in SKINTOP® cable glands, benefit: increasing the packing density enables smaller dimensioned components, easy routing of several cables through one screw connection
Sales unit: 100 pieces
Lieske Part No.: 430883

Multiple sealing insert SKINTOP® DIX 11330, Multiple sealing insert, PG 11, Number of cable entries: 3pcs., Bore diameter: 3mm, natural, Areas of application: Instead of the inner sealing insert, a seal with several holes is used, For use in SKINTOP® cable glands, Benefits: Increasing the packing density enables smaller dimensioned components, Easy routing of several cables through one screw connection
Sales unit: 100 pieces
Lieske Part No.: 382185

Multiple sealing insert SKINTOP® DIX 13250, Multiple sealing insert, PG 13.5, Number of cable entries: 2 pieces, Bore diameter: 5 mm, natural, Areas of application: Instead of the inner sealing insert, a seal with several holes is used, For use in SKINTOP® cable glands, Benefits: Increasing the packing density enables smaller-sized components, Easy routing of several cables through one screw connection
Sales unit: 100 pieces
Lieske Part No.: 972626

Multiple sealing insert SKINTOP® DIX 13340, Multiple sealing insert, PG 13.5, Number of cable entries: 3pcs., Bore diameter: 4mm, natural, Areas of application: Instead of the inner sealing insert, a seal with several holes is used, For use in SKINTOP® cable glands, Benefits: Increasing the packing density enables smaller dimensioned components, Easy routing of several cables through one screw connection
Sales unit: 100 pieces
Lieske Part No.: 229561

Multiple sealing insert SKINTOP® DIX 13440, Multiple sealing insert, PG 13.5, Number of cable entries: 4 pieces, Bore diameter: 4 mm, natural, Areas of application: Instead of the inner sealing insert, a seal with several holes is used, For use in SKINTOP® cable glands, Benefits: Increasing the packing density enables smaller-sized components, Easy routing of several cables through one screw connection
Sales unit: 100 pieces
Lieske Part No.: 311473

Multiple sealing insert SKINTOP® DIX 16140, multiple sealing insert, PG 16, number of cable entries: 1pc., bore diameter: 4mm, natural, areas of application: instead of the inner sealing insert, a seal with several bores is used, for use in SKINTOP® cable glands, benefit: increasing the packing density enables smaller dimensioned components, easy routing of several cables through one screw connection
Sales unit: 50 pieces
Lieske Part No.: 695075