Protection hose in Conduits / Cable Glands

Flexible cable protection conduit for switchboard plant, switch cabinets, machine engineering and robotics, non-flame, PVC-P jacket, spiral plastic coated spring steel wire, UV ozone-resistant, air-wassserdicht, good oil-caustic acid resistance, axial rotation and compressible, classification: IP68 , the system IP54,


Type: FFKSS-SW29/10M
Quantity: 1 unit.
Lieske Part No.: 355059

FFKSS-SW plastic spiral hose made of PVC-P with spring steel wire plastic-coated. It is used in mechanical and plant engineering.
Lieske Part No.: 743857

FFKSS-SW plastic spiral hose made of PVC-P with spring steel wire plastic-coated. It is used in mechanical and plant engineering.
Lieske Part No.: 118493

FFKSS-SW plastic spiral hose made of PVC-P with spring steel wire plastic-coated. It is used in mechanical and plant engineering.
Sales unit: 50 meters
Lieske Part No.: 536741

FFKSS-SW plastic spiral hose made of PVC-P with spring steel wire plastic-coated. It is used in mechanical and plant engineering.
Sales unit: 50 meters
Lieske Part No.: 955402

FFKSS-SW plastic spiral hose made of PVC-P with spring steel wire plastic-coated. It is used in mechanical and plant engineering.
Sales unit: 50 meters
Lieske Part No.: 842998

FFKSS-SW plastic spiral hose made of PVC-P with spring steel wire plastic-coated. It is used in mechanical and plant engineering.
Sales unit: 50 meters
Lieske Part No.: 678803

FFKSS-SW plastic spiral hose made of PVC-P with spring steel wire plastic-coated. It is used in mechanical and plant engineering.
Sales unit: 25 meters
Lieske Part No.: 387086

FFKSS-SW plastic spiral hose made of PVC-P with spring steel wire plastic-coated. It is used in mechanical and plant engineering.
Sales unit: 25 meters
Lieske Part No.: 595149

FFKSS-SW plastic spiral hose made of PVC-P with spring steel wire plastic-coated. It is used in mechanical and plant engineering.
Sales unit: 25 meters
Lieske Part No.: 102017

FIPSPECIALS® Kunststoffwellrohr FPES aus modifiziertem Polyethylen PE LD, halogenfrei, mit Feinprofil. Es eignet sich durch die leichte Biegsamkeit hervorragend zur Bündelung von Leitungen. Anwendungen findet es im Schaltschrankbau. Verkaufseinheit: 1 MTR
Sales unit: 25 meters
Lieske Part No.: 834460

FIPLOCK® Kunststoffwellrohr FPPO aus speziell formuliertem Polypropylen, halogenfrei, mit Feinprofil. Es eignet sich für leicht dynamische Kabelschutzanwendungen. Angewendet wird es im Maschinen- und Anlagenbau. Verkaufseinheit: 1 MTR
Sales unit: 50 meters
Lieske Part No.: 834464

FIPLOCK® plastic corrugated pipe FPPS-U made of specially formulated polypropylene, halogen-free, with coarse profile, UV-stabilized. It is suitable for outdoor cable protection applications. It is used in railway secondary applications and in the field of solar and photovoltaics.
Sales unit: 50 meters
Lieske Part No.: 2131248

FIPLOCK® Kunststoffwellrohr FPPS-U aus speziell formuliertem Polypropylen, halogenfrei, mit Grobprofil, UV-stabilisiert. Es eignet sich für Kabelschutzanwendungen im Freien. Angewendet wird es bei Bahnnebenanwendungen und im Bereich der Solar- und Photovoltaik. Verkaufseinheit: 1 MTR
Sales unit: 50 meters
Lieske Part No.: 702431

FIPLOCK® Kunststoffwellrohr FPPS-U aus speziell formuliertem Polypropylen, halogenfrei, mit Grobprofil, UV-stabilisiert. Es eignet sich für Kabelschutzanwendungen im Freien. Angewendet wird es bei Bahnnebenanwendungen und im Bereich der Solar- und Photovoltaik. Verkaufseinheit: 1 MTR
Sales unit: 50 meters
Lieske Part No.: 702432

FIPLOCK® Kunststoffwellrohr FPPS-U aus speziell formuliertem Polypropylen, halogenfrei, mit Grobprofil, UV-stabilisiert. Es eignet sich für Kabelschutzanwendungen im Freien. Angewendet wird es bei Bahnnebenanwendungen und im Bereich der Solar- und Photovoltaik. Verkaufseinheit: 1 MTR
Sales unit: 50 meters
Lieske Part No.: 702435

FIPLOCK® Kunststoffwellrohr FPPS-U aus speziell formuliertem Polypropylen, halogenfrei, mit Grobprofil, UV-stabilisiert. Es eignet sich für Kabelschutzanwendungen im Freien. Angewendet wird es bei Bahnnebenanwendungen und im Bereich der Solar- und Photovoltaik. Verkaufseinheit: 50 MTR
Sales unit: 50 meters
Lieske Part No.: 702436

FIPLOCK® plastic corrugated pipe FPPS-U made of specially formulated polypropylene, halogen-free, with coarse profile, UV-stabilized. It is suitable for outdoor cable protection applications. It is used in railway secondary applications and in the field of solar and photovoltaics.
Sales unit: 50 meters
Lieske Part No.: 2131249

FIPLOCK® plastic corrugated pipe FPPS-U made of specially formulated polypropylene, halogen-free, with coarse profile, UV-stabilized. It is suitable for outdoor cable protection applications. It is used in railway secondary applications and in the field of solar and photovoltaics.
Sales unit: 25 meters
Lieske Part No.: 2131250

FIPLOCK® plastic corrugated pipe FPPS-U made of specially formulated polypropylene, halogen-free, with coarse profile, UV-stabilized. It is suitable for outdoor cable protection applications. It is used in railway secondary applications and in the field of solar and photovoltaics.
Sales unit: 25 meters
Lieske Part No.: 2131251

FIPLOCK® Kunststoffwellrohr FPPS-O aus speziell formuliertem Polypropylen, halogenfrei, mit Feinprofil. Es eignet sich für die optische Kennzeichnung von Kabel und Leitungen. Angewendet wird es im Maschinen- und Anlagenbau. Verkaufseinheit: 1 MTR
Sales unit: 50 meters
Lieske Part No.: 834502

FIPLOCK® plastic corrugated pipe FPPS-O made of specially formulated polypropylene, halogen-free, with fine profile. It is suitable for the optical marking of cables and lines. It is used in mechanical and plant engineering.
Sales unit: 50 meters
Lieske Part No.: 1101532

FIPLOCK® plastic corrugated pipe FPPS-O made of specially formulated polypropylene, halogen-free, with fine profile. It is suitable for the optical marking of cables and lines. It is used in mechanical and plant engineering.
Sales unit: 50 meters
Lieske Part No.: 1101533

FIPLOCK® Kunststoffwellrohr FPPS-O aus speziell formuliertem Polypropylen, halogenfrei, mit Feinprofil. Es eignet sich für die optische Kennzeichnung von Kabel und Leitungen. Angewendet wird es im Maschinen- und Anlagenbau. Verkaufseinheit: 1 MTR
Sales unit: 50 meters
Lieske Part No.: 834503

FIPLOCK® Kunststoffwellrohr FPPS-O aus speziell formuliertem Polypropylen, halogenfrei, mit Feinprofil. Es eignet sich für die optische Kennzeichnung von Kabel und Leitungen. Angewendet wird es im Maschinen- und Anlagenbau. Verkaufseinheit: 1 MTR
Sales unit: 25 meters
Lieske Part No.: 834518

FIPLOCK® plastic corrugated pipe FPPS-O made of specially formulated polypropylene, halogen-free, with fine profile. It is suitable for the optical marking of cables and lines. It is used in mechanical and plant engineering.
Sales unit: 25 meters
Lieske Part No.: 1101534

FIPSPLIT® Kunststoffwellrohr geschlitzt 1PPS aus hochwertigem speziell formuliertem Polypropylen, halogenfrei, UV-stabilisiert. Es eignet sich besonders für die Nachrüstung von Kabel und Leitungen. Durch die passgenaue Überlappung der Rohr-Längstrennung wird ein Aufklaffen des Wellrohres bei Biegungen vermieden. Angewendet wird es im Maschinen- und Anlagenbau und im Bereich der Solar- und Photovoltaik. Verkaufseinheit: 1 MTR
Sales unit: 50 meters
Lieske Part No.: 834519

FIPSPLIT® Kunststoffwellrohr geschlitzt 1PPS aus hochwertigem speziell formuliertem Polypropylen, halogenfrei, UV-stabilisiert. Es eignet sich besonders für die Nachrüstung von Kabel und Leitungen. Durch die passgenaue Überlappung der Rohr-Längstrennung wird ein Aufklaffen des Wellrohres bei Biegungen vermieden. Angewendet wird es im Maschinen- und Anlagenbau und im Bereich der Solar- und Photovoltaik. Verkaufseinheit: 1 MTR
Sales unit: 50 meters
Lieske Part No.: 834520

FIPSPLIT® Kunststoffwellrohr teilbar 2PPS aus hochwertigem speziell formuliertem Polypropylen, halogenfrei. Das zweiteilige Wellrohr eignet sich besonders für die Nachrüstung von Kabel und Leitungen. Anwendungen findet er im Maschinen- und Anlagenbau. Verkaufseinheit: 1 MTR
Sales unit: 50 meters
Lieske Part No.: 834521

FIPSPLIT® Kunststoffwellrohr teilbar 2PPS aus hochwertigem speziell formuliertem Polypropylen, halogenfrei. Das zweiteilige Wellrohr eignet sich besonders für die Nachrüstung von Kabel und Leitungen. Anwendungen findet er im Maschinen- und Anlagenbau. Verkaufseinheit: 1 MTR
Sales unit: 50 meters
Lieske Part No.: 834522

FIPSPLIT® Kunststoffwellrohr teilbar 2PPS aus hochwertigem speziell formuliertem Polypropylen, halogenfrei. Das zweiteilige Wellrohr eignet sich besonders für die Nachrüstung von Kabel und Leitungen. Anwendungen findet er im Maschinen- und Anlagenbau. Verkaufseinheit: 1 MTR
Sales unit: 50 meters
Lieske Part No.: 834524

FIPSPLIT® Kunststoffwellrohr teilbar 2PPS aus hochwertigem speziell formuliertem Polypropylen, halogenfrei. Das zweiteilige Wellrohr eignet sich besonders für die Nachrüstung von Kabel und Leitungen. Anwendungen findet er im Maschinen- und Anlagenbau. Verkaufseinheit: 1 MTR
Sales unit: 50 meters
Lieske Part No.: 834525

FIPSPLIT® Kunststoffwellrohr teilbar 2PPS aus hochwertigem speziell formuliertem Polypropylen, halogenfrei. Das zweiteilige Wellrohr eignet sich besonders für die Nachrüstung von Kabel und Leitungen. Anwendungen findet er im Maschinen- und Anlagenbau. Verkaufseinheit: 1 MTR
Sales unit: 25 meters
Lieske Part No.: 834526

FIPSPLIT® Kunststoffwellrohr teilbar 2PPS aus hochwertigem speziell formuliertem Polypropylen, halogenfrei. Das zweiteilige Wellrohr eignet sich besonders für die Nachrüstung von Kabel und Leitungen. Anwendungen findet er im Maschinen- und Anlagenbau. Verkaufseinheit: 1 MTR
Sales unit: 25 meters
Lieske Part No.: 834527

FIPSPLIT® Kunststoffwellrohr teilbar 2PPS aus hochwertigem speziell formuliertem Polypropylen, halogenfrei. Das zweiteilige Wellrohr eignet sich besonders für die Nachrüstung von Kabel und Leitungen. Anwendungen findet er im Maschinen- und Anlagenbau. Verkaufseinheit: 10 MTR
Sales unit: 10 meters
Lieske Part No.: 2145200

Co-flex PP is a slotted, sealable corrugated pipe made of PP-MOD-BS, non-flame-spreading. Available in black. This corrugated pipe is used for the subsequent protection of cables, in machine and plant engineering, as well as in offices and private areas. The advantages are its high temperature resistance and protection against bites from martens and rodents. This divisible corrugated pipe can be easily installed around an already installed cable. Processing begins with opening the system, then the inner pipe is fitted with cable and finally the slot is closed by plugging on the outer pipe. Temperature resistance according to LV312-3: -40° C to +135° C, briefly up to +150° C. Temperature resistance according to DIN EN 61386-22 (VDE 0605-22) -25° C to +105° C. Flammability: UL 94 HB / FMVSS 302 Type B
Sales unit: 50 meters
Lieske Part No.: 573863

Co-flex PP is a slotted, sealable corrugated pipe made of PP-MOD-BS, non-flame-spreading. Available in black. This corrugated pipe is used for the subsequent protection of cables, in machine and plant engineering, as well as in offices and private areas. The advantages are its high temperature resistance and protection against bites from martens and rodents. This divisible corrugated pipe can be easily installed around an already installed cable. Processing begins with opening the system, then the inner pipe is fitted with cable and finally the slot is closed by plugging on the outer pipe. Temperature resistance according to LV312-3: -40° C to +135° C, briefly up to +150° C. Temperature resistance according to DIN EN 61386-22 (VDE 0605-22) -25° C to +105° C. Flammability: UL 94 HB / FMVSS 302 Type B
Sales unit: 50 meters
Lieske Part No.: 540529

flexible corrugated pipe, on the computer, TV cabinet, cabinet construction, automotive installation, protection against marten bites, Electrical equipment industry, non-flame, closed, slotted, self-extinguishing Resistant to: acids, bases, inorganic salts, fuels, mineral oils, fats, common Solvents,
Divisible flex conduit Co PP
Size: 10
OD: 13.6
inner diameter: 8.7 Type: CO-FLEX-PP10-10M


Quantity: 1 MTR
Sales unit: 10 meters
Lieske Part No.: 159806

Co-flex PP is a slotted, sealable corrugated pipe made of PP-MOD-BS, non-flame-spreading. Available in black. This corrugated pipe is used for the subsequent protection of cables, in machine and plant engineering, as well as in offices and private areas. The advantages are its high temperature resistance and protection against bites from martens and rodents. This divisible corrugated pipe can be easily installed around an already installed cable. Processing begins with opening the system, then the inner pipe is fitted with cable and finally the slot is closed by plugging on the outer pipe. Temperature resistance according to LV312-3: -40° C to +135° C, briefly up to +150° C. Temperature resistance according to DIN EN 61386-22 (VDE 0605-22) -25° C to +105° C. Flammability: UL 94 HB / FMVSS 302 Type B
Sales unit: 50 meters
Lieske Part No.: 573922

Co-flex PP is a slotted, sealable corrugated pipe made of PP-MOD-BS, non-flame-spreading. Available in black. This corrugated pipe is used for the subsequent protection of cables, in machine and plant engineering, as well as in offices and private areas. The advantages are its high temperature resistance and protection against bites from martens and rodents. This divisible corrugated pipe can be easily installed around an already installed cable. Processing begins with opening the system, then the inner pipe is fitted with cable and finally the slot is closed by plugging on the outer pipe. Temperature resistance according to LV312-3: -40° C to +135° C, briefly up to +150° C. Temperature resistance according to DIN EN 61386-22 (VDE 0605-22) -25° C to +105° C. Flammability: UL 94 HB / FMVSS 302 Type B
Lieske Part No.: 430932

Co-flex PP is a slotted, sealable corrugated pipe made of PP-MOD-BS, non-flame-spreading. Available in black. This corrugated pipe is used for the subsequent protection of cables, in machine and plant engineering, as well as in offices and private areas. The advantages are its high temperature resistance and protection against bites from martens and rodents. This divisible corrugated pipe can be easily installed around an already installed cable. Processing begins with opening the system, then the inner pipe is fitted with cable and finally the slot is closed by plugging on the outer pipe. Temperature resistance according to LV312-3: -40° C to +135° C, briefly up to +150° C. Temperature resistance according to DIN EN 61386-22 (VDE 0605-22) -25° C to +105° C. Flammability: UL 94 HB / FMVSS 302 Type B
Sales unit: 50 meters
Lieske Part No.: 318773

Divisible Co-flex PP corrugated pipe

Size: 20

OD: 25.5

Inside Ø: 19.5

Type: Co-flex PP, NW 20, Black, 5 m coil item: 5 MTR
Sales unit: 5 meters
Lieske Part No.: 273448

flexible corrugated pipe, on the computer, TV cabinet, cabinet construction, automotive installation, protection against marten bites, Electrical equipment industry, non-flame, closed, slotted, self-extinguishing Resistant to: acids, bases, inorganic salts, fuels, mineral oils, fats, common solvents, Divisible Conduit Co flex PP Size: 23 OD: 3
, inner diameter: 24.2 Type: CO-FLEX-PP23
M Quantity:
MTR
Sales unit: 10 meters
Lieske Part No.: 790821

flexible corrugated pipe, on the computer, TV cabinet, cabinet construction, automotive installation, protection against marten bites, Electrical equipment industry, non-flame, closed, slotted, self-extinguishing Resistant to: acids, bases, inorganic salts, fuels, mineral oils, fats, common Solvents
Divisible Co-flex PP corrugated pipe
Size: 37
OD: 41.4
inner diameter: 31.0 Type: CO-FLEX-PP37-5M


Quantity: 1 MTR
Sales unit: 5 meters
Lieske Part No.: 206856

Co-flex PP is a slotted, sealable corrugated pipe made of PP-MOD-BS, non-flame-spreading. Available in black. This corrugated pipe is used for the subsequent protection of cables, in machine and plant engineering, as well as in offices and private areas. The advantages are its high temperature resistance and protection against bites from martens and rodents. This divisible corrugated pipe can be easily installed around an already installed cable. Processing begins with opening the system, then the inner pipe is fitted with cable and finally the slot is closed by plugging on the outer pipe. Temperature resistance according to LV312-3: -40° C to +135° C, briefly up to +150° C. Temperature resistance according to DIN EN 61386-22 (VDE 0605-22) -25° C to +105° C. Flammability: UL 94 HB / FMVSS 302 Type B
Sales unit: 10 meters
Lieske Part No.: 162682

Co-flex PP is a slotted, sealable corrugated pipe made of PP-MOD-BS, non-flame-spreading. Available in black. This corrugated pipe is used for the subsequent protection of cables, in machine and plant engineering, as well as in offices and private areas. The advantages are its high temperature resistance and protection against bites from martens and rodents. This divisible corrugated pipe can be easily installed around an already installed cable. Processing begins with opening the system, then the inner pipe is fitted with cable and finally the slot is closed by plugging on the outer pipe. Temperature resistance according to LV312-3: -40° C to +135° C, briefly up to +150° C. Temperature resistance according to DIN EN 61386-22 (VDE 0605-22) -25° C to +105° C. Flammability: UL 94 HB / FMVSS 302 Type B
Sales unit: 10 meters
Lieske Part No.: 318779

FIPSPLIT® divisible plastic corrugated pipe 2PPS-U made of high-quality, specially formulated polypropylene, halogen-free, UV-stabilized. The two-part corrugated pipe is particularly suitable for retrofitting cables and lines. It is used in mechanical and plant engineering as well as in the field of solar and photovoltaics.
Sales unit: 50 meters
Lieske Part No.: 673503

FIPSPLIT® divisible plastic corrugated pipe 2PPS-U made of high-quality, specially formulated polypropylene, halogen-free, UV-stabilized. The two-part corrugated pipe is particularly suitable for retrofitting cables and lines. It is used in mechanical and plant engineering as well as in the field of solar and photovoltaics.
Sales unit: 25 meters
Lieske Part No.: 1061242

FIPSPLIT® Kunststoffwellrohr teilbar 2PPS-U aus hochwertigem speziell formuliertem Polypropylen, halogenfrei, UV-stabilisiert. Das zweiteilige Wellrohr eignet sich besonders für die Nachrüstung von Kabel und Leitungen. Anwendungen findet er im Maschinen- und Anlagenbau sowie im Bereich der Solar- und Photovoltaik. Verkaufseinheit: 1 MTR
Sales unit: 25 meters
Lieske Part No.: 834528

Co-flex PP-UV is a slotted, sealable corrugated pipe made of PP-MOD-BS-UV. Non-flame-spreading and available in black. This corrugated pipe is used for various outdoor installations, the main areas of application being solar systems, satellite systems and photovoltaic systems. The advantages are its high temperature resistance and protection against bites from martens and rodents. This divisible corrugated pipe can be easily installed around an already installed cable. Processing begins with opening the system, then the inner pipe is fitted with cable and finally the slot is closed by plugging on the outer pipe. UV-stable for up to 20 years. Temperature resistance according to LV312-3: -40° C to +105° C Temperature resistance according to DIN EN 61386-22 (VDE 0605-22) -25° C to +105° C. Flammability: UL 94 V2 / FMVSS 302
Sales unit: 50 meters
Lieske Part No.: 951853