Cable gland SKINDICHT® SK PG 16, cable gland, PG 16, clamping range (min./max.): 13 - 18 mm, nickel-plated brass, halogen-free, UV-resistant, IP 20, , Areas of application: plugs, cable gland with two solid brass clamps, switches, control panels, Benefits: reliable strain relief, large clamping range
Sales unit: 25 pieces
Lieske Part No.: 626816

Cable gland SKINDICHT® SK PG 21, cable gland, PG 21, clamping range (min./max.): 15 - 23 mm, nickel-plated brass, halogen-free, UV-resistant, IP 20, , Areas of application: plugs, cable gland with two solid brass clamps, switches, control panels, Benefits: reliable strain relief, large clamping range
Sales unit: 25 pieces
Lieske Part No.: 1230923

Cable gland SKINDICHT® SKZ PG 9, cable gland, PG 9, clamping range (min./max.): 5 - 8 mm, wrench size 1: 17, nickel-plated brass, UV-resistant, IP 55, , Areas of application: electric motor construction, plant construction, construction sites, double-bracket strain relief cable gland, for harsh operating conditions, Benefits: high mechanical load capacity, high strain relief, with cut-in sealing ring for adaptation to different cable diameters
Sales unit: 50 pieces
Lieske Part No.: 439599

Cable gland SKINDICHT® SKZ PG 11, cable gland, PG 11, clamping range (min./max.): 7 - 12.5 mm, wrench size 1: 20, nickel-plated brass, UV-resistant, IP 55, , Areas of application: electric motor construction, plant construction, construction sites, double-bar strain relief cable gland, for harsh operating conditions, Benefits: high mechanical load capacity, high strain relief, with cut-in sealing ring for adaptation to different cable diameters
Sales unit: 50 pieces
Lieske Part No.: 1230921

Cable gland SKINDICHT® SKZ PG 13.5, cable gland, PG 13.5, clamping range (min./max.): 7 - 16 mm, wrench size 1: 22, nickel-plated brass, UV-resistant, IP 55, , Areas of application: electric motor construction, plant construction, construction sites, double-bar strain relief cable gland, for harsh operating conditions, Benefits: high mechanical load capacity, high strain relief, with cut-in sealing ring for adaptation to different cable diameters
Sales unit: 25 pieces
Lieske Part No.: 568462

Cable gland SKINDICHT® SKZ PG 16, cable gland, PG 16, clamping range (min./max.): 8 - 16 mm, wrench size 1: 24, nickel-plated brass, UV-resistant, IP 55, , Areas of application: electric motor construction, plant construction, construction sites, double-bracket strain relief cable gland, for harsh operating conditions, Benefits: high mechanical load capacity, high strain relief, with cut-in sealing ring for adaptation to different cable diameters
Sales unit: 25 pieces
Lieske Part No.: 439593

Cable gland SKINDICHT® SKZ PG 21, cable gland, PG 21, clamping range (min./max.): 11 - 20 mm, wrench size 1: 30, nickel-plated brass, UV-resistant, IP 55, , Areas of application: electric motor construction, plant construction, construction sites, double-bracket strain relief cable gland, for harsh operating conditions, Benefits: high mechanical load capacity, high strain relief, with cut-in sealing ring for adaptation to different cable diameters
Sales unit: 25 pieces
Lieske Part No.: 665810

Cable gland SKINDICHT® SHVE PG 13/13/11/7, cable gland, PG 13.5, clamping range (min./max.): 8.5 - 10.8 mm, nickel-plated brass, UV-resistant, IP 67, IP 66, IP 65, IP 68 - 10 bar, EMC shielding, areas of application: medical technology, earthing cable gland, areas of application wherever electrical interference fields can occur, frequency converters, airports, measurement, control and regulation technology, benefits: optimal, low-resistance 360° shield contact, high protection class, high strain relief
Sales unit: 25 pieces
Lieske Part No.: 1230926

Cable gland SKINDICHT® SHVE PG 16/16/15/11, cable gland, PG 16, clamping range (min./max.): 12 - 14.8 mm, nickel-plated brass, UV-resistant, IP 67, IP 66, IP 65, IP 68 - 10 bar, EMC shielding, areas of application: medical technology, earthing cable gland, areas of application wherever electrical interference fields can occur, frequency converters, airports, measurement, control and regulation technology, benefits: optimal, low-resistance 360° shield contact, high protection class, high strain relief
Sales unit: 25 pieces
Lieske Part No.: 439490

Cable gland SKINDICHT® SHVE PG 21/21/18/14, cable gland, PG 21, clamping range (min./max.): 15.8 - 17.8 mm, nickel-plated brass, UV-resistant, IP 67, IP 66, IP 65, IP 68 - 10 bar, EMC shielding, areas of application: medical technology, earthing cable gland, areas of application wherever electrical interference fields can occur, frequency converters, airports, measurement, control and regulation technology, benefits: optimal, low-resistance 360° shield contact, high protection class, high strain relief
Sales unit: 25 pieces
Lieske Part No.: 439492

Cable gland SKINDICHT® SHVE PG 21/21/20/16, cable gland, PG 21, clamping range (min./max.): 17.5 - 19.8 mm, nickel-plated brass, UV-resistant, IP 67, IP 66, IP 65, IP 68 - 10 bar, EMC shielding, areas of application: medical technology, earthing cable gland, areas of application wherever electrical interference fields can occur, frequency converters, airports, measurement, control and regulation technology, benefits: optimal, low-resistance 360° shield contact, high protection class, high strain relief
Sales unit: 25 pieces
Lieske Part No.: 439494

Cable gland SKINDICHT® SRE PG 36/36/30/24, cable gland, PG 36, clamping range (min./max.): 27 - 30 mm, wrench size 1: 50, nickel-plated brass, UV-resistant, IP 65, EMC shielding, areas of application: earthing cable gland with additional kink protection areas of application wherever electrical interference fields can occur, production lines, conveyor and transport systems, measurement, control and regulation technology, moving machine parts, benefits: perfect sealing with kink protection, optimal, low-resistance 360° shield contact, high protection class, cable-friendly strain relief, gentle clamping of the cable
Sales unit: 5 pieces
Lieske Part No.: 1231133

Angle cable gland SKINDICHT® RWV PG 21, Angle cable gland, PG 21, Clamping range (min./max.): 11 - 20 mm, 90° angle, IP 55, Areas of application: Electric motor construction, Angle glands are used where cables and lines should be routed as parallel as possible along the housing wall, Light and sound applications, Plant engineering, Mechanical and equipment engineering, Benefits: Reduction in installation height, Seawater resistant, Strain relief, Sealing by means of a cut-out sealing ring, Corrosion resistant
Sales unit: 10 pieces
Lieske Part No.: 137734

Flat cable gland SKINDICHT® SVFK PG 16, Flat cable gland, PG 16, Flat cable width (min./max.) 0.0 - 15.0 mm, Flat cable height (min./max.) 0.0 - 5.0 mm, IP 54, Areas of application: Conveyors, Switch cabinet construction, Elevator construction, For the introduction of flat cables, Pumps, Benefits: Cable-specific sealing dimensions are no longer required, Large clear width, so up to two flat cables can be clamped, Dimensionally tolerant system, Economical plastic design, Side sealing lips adjust automatically
Sales unit: 25 pieces
Lieske Part No.: 456465

Cable gland SKINDICHT® SVF PG 21, cable gland, PG 21, flat cable width (min./max.) 9.0 - 21.0 mm, flat cable height (min./max.) 3.0 - 8.0 mm, nickel-plated brass, UV-resistant, IP 54, areas of application: conveyors, switch cabinet construction, elevator construction, for the introduction of flat cables, pumps, benefits: high mechanical load capacity, large clear width, so up to two flat cables can be clamped, optimal strain relief, side sealing lips adjust automatically
Sales unit: 25 pieces
Lieske Part No.: 436463

Cable gland SKINDICHT® SVF PG 29, cable gland, PG 29, flat cable width (min./max.) 14.0 - 30.0 mm, flat cable height (min./max.) 4.0 - 11.5 mm, nickel-plated brass, UV-resistant, IP 54, areas of application: conveyors, switch cabinet construction, elevator construction, for the introduction of flat cables, pumps, benefits: high mechanical load-bearing capacity, large clear width, so up to two flat cables can be clamped, optimal strain relief, side sealing lips adjust automatically
Sales unit: 10 pieces
Lieske Part No.: 504445

Cable gland SKINDICHT® SVF PG 36, cable gland, PG 36, flat cable width (min./max.) 24.0 - 40.0 mm, flat cable height (min./max.) 4.0 - 11.5 mm, nickel-plated brass, UV-resistant, IP 54, areas of application: conveyors, switch cabinet construction, elevator construction, for the introduction of flat cables, pumps, benefits: high mechanical load capacity, large clear width, so up to two flat cables can be clamped, optimal strain relief, side sealing lips adjust automatically
Sales unit: 10 pieces
Lieske Part No.: 436464

Cable gland SKINDICHT® SVF PG 42, cable gland, PG 42, flat cable width (min./max.) 29.0 - 45.0 mm, flat cable height (min./max.) 5.0 - 12.0 mm, nickel-plated brass, UV-resistant, IP 54, areas of application: conveyors, switch cabinet construction, elevator construction, for the introduction of flat cables, pumps, benefits: high mechanical load capacity, large clear width, so up to two flat cables can be clamped, optimal strain relief, side sealing lips adjust automatically
Sales unit: 5 pieces
Lieske Part No.: 439902

Cable gland SKINDICHT® SVF PG 48, cable gland, PG 48, flat cable width (min./max.) 34.0 - 50.0 mm, flat cable height (min./max.) 5.0 - 12.0 mm, nickel-plated brass, UV-resistant, IP 54, areas of application: conveyors, switch cabinet construction, elevator construction, for the introduction of flat cables, pumps, benefits: high mechanical load capacity, large clear width, so up to two flat cables can be clamped, optimal strain relief, side sealing lips adjust automatically
Sales unit: 5 pieces
Lieske Part No.: 554331

Cable gland SKINDICHT® SVRE PG 9, cable gland, PG 9, clamping range (min./max.): 5 - 8 mm, wrench size 1: 17, nickel-plated brass, UV-resistant, IP 54, , Areas of application: Cable gland made of brass with hexagonal intermediate socket and variable cut-in sealing ring, Benefits: Fewer sizes in stock, With cut-in sealing ring for adaptation to different cable diameters
Sales unit: 100 pieces
Lieske Part No.: 2013374

Cable gland SKINDICHT® SVRE PG 48, cable gland, PG 48, clamping range (min./max.): 40.5 - 47 mm, wrench size 1: 64, nickel-plated brass, UV-resistant, IP 54, , Areas of application: Cable gland made of brass with hexagonal intermediate socket and variable cut-in sealing ring, Benefits: Fewer sizes in stock, With cut-in sealing ring for adaptation to different cable diameters
Sales unit: 10 pieces
Lieske Part No.: 439923

Cable gland SKINDICHT® SKZ PG 29, cable gland, PG 29, clamping range (min./max.): 19 - 31 mm, wrench size 1: 40, nickel-plated brass, UV-resistant, IP 55, , Areas of application: electric motor construction, plant construction, construction sites, double-bracket strain relief cable gland, for harsh operating conditions, Benefits: high mechanical load capacity, high strain relief, with cut-in sealing ring for adaptation to different cable diameters
Sales unit: 10 pieces
Lieske Part No.: 439594

Cable gland SKINDICHT® SHZ PG 7, cable gland, PG 7, clamping range (min./max.): 5 - 5 mm, wrench size 1: 14, nickel-plated brass, halogen-free, UV-resistant, IP 55, , Areas of application: Brass compact screw connection for stable strain relief, solid, for large cable cross-sections, Benefits: For cables and lines with a large outer diameter, Robust, High strain relief, With cut-in sealing ring for adaptation to different cable diameters
Sales unit: 50 pieces
Lieske Part No.: 439534

Cable gland SKINDICHT® SHZ PG 42, cable gland, PG 42, clamping range (min./max.): 30 - 42.5 mm, wrench size 1: 57, nickel-plated brass, halogen-free, UV-resistant, IP 55, , Areas of application: Brass compact screw connection for stable strain relief, solid, for large cable cross-sections, Benefits: For cables and lines with a large outer diameter, Robust, High strain relief, With cut-in sealing ring for adaptation to different cable diameters
Sales unit: 5 pieces
Lieske Part No.: 1231213

Flat cable gland SKINDICHT® SVFK PG 21, Flat cable gland, PG 21, Flat cable width (min./max.) 10.0 - 20.5 mm, Flat cable height (min./max.) 3.0 - 8.0 mm, IP 54, Areas of application: Conveyors, Switch cabinet construction, Elevator construction, For the introduction of flat cables, Pumps, Benefits: Cable-specific sealing dimensions are no longer required, Large clear width, so up to two flat cables can be clamped, Dimensionally tolerant system, Economical plastic design, Side sealing lips adjust automatically
Sales unit: 25 pieces
Lieske Part No.: 439908

Flat cable gland SKINDICHT® SVFK PG 29, Flat cable gland, PG 29, Flat cable width (min./max.) 15.0 - 27.0 mm, Flat cable height (min./max.) 4.0 - 11.5 mm, IP 54, Areas of application: Conveyors, Switch cabinet construction, Elevator construction, For the introduction of flat cables, Pumps, Benefits: Cable-specific sealing dimensions are no longer required, Large clear width, so up to two flat cables can be clamped, Dimensionally tolerant system, Economical plastic design, Side sealing lips adjust automatically
Sales unit: 25 pieces
Lieske Part No.: 439919

Flat cable gland SKINDICHT® SVFK PG 36, Flat cable gland, PG 36, Flat cable width (min./max.) 25.0 - 34.0 mm, Flat cable height (min./max.) 4.0 - 11.5 mm, IP 54, Areas of application: Conveyors, Switch cabinet construction, Elevator construction, For the introduction of flat cables, Pumps, Benefits: Cable-specific sealing dimensions are no longer required, Large clear width, so up to two flat cables can be clamped, Dimensionally tolerant system, Economical plastic design, Side sealing lips adjust automatically
Sales unit: 10 pieces
Lieske Part No.: 523885

Sealing ring SKINDICHT® O-RING PG 13.5 (18X1.5) NBR, sealing ring, PG 13.5, inner diameter: 18mm, outer diameter: 21mm, acrylonitrile butadiene rubber, NBR, black, areas of application: For secure sealing against foreign bodies and liquids on the connection thread of a screw connection or similar parts, benefits: Resistant to oil, dust and water
Sales unit: 100 pieces
Lieske Part No.: 440254

Incision sealing ring SKINDICHT® E PG 9 INCISED SEAL, incision sealing ring, PG 9, inner diameter: 5.0mm8.0mm, chloroprene rubber, black, areas of application: incision sealing ring for SKINDICHT® cable glands, benefits: easy breaking out of the various incisions, one seal for different clamping areas
Sales unit: 250 pieces
Lieske Part No.: 438912

Blind plug SKINDICHT® BLK PG 11 RAL 7035 LGY, Blind plug, Thread size: PG 11, Polystyrene, Halogen-free, UV-resistant, , Areas of application: Distribution box, Switch cabinet construction, Junction boxes, Benefits: For closing prefabricated threaded holes
Sales unit: 100 pieces
Lieske Part No.: 788080

Locknut SKINDICHT® SM/SVRX 24X1.5, locknut, M 24, wrench size: 30mm, nickel-plated brass, areas of application: offshore, shipbuilding, high-performance engines, cable gland according to DIN 89280 with round intermediate socket made of brass, bare, wind turbines, benefits: SKINDICHT® SVRX 105x2 for cable cross-sections up to 83 mm, EMC version for cables with large cross-sections
Lieske Part No.: 439625

Cable gland SKINDICHT® SVRX 2414-Z, cable gland, M 24, clamping range (min./max.): 12 - 14.5 mm, halogen-free, UV-resistant, IP 56, EMC shielding, areas of application: offshore, shipbuilding, high-performance engines, the cable gland according to DIN 89280 with round intermediate socket made of brass, bare, wind turbines, benefits: SKINDICHT® SVRX 105x2 for cable cross-sections up to 83 mm, EMC version for cables with large cross-sections
Lieske Part No.: 440543

Cable gland SKINDICHT® SVRX 2416-Z, cable gland, M 24, clamping range (min./max.): 14 - 16.5 mm, halogen-free, UV-resistant, IP 56, EMC shielding, areas of application: offshore, shipbuilding, high-performance engines, the cable gland according to DIN 89280 with round intermediate socket made of brass, bare, wind turbines, benefits: SKINDICHT® SVRX 105x2 for cable cross-sections up to 83 mm, EMC version for cables with large cross-sections
Lieske Part No.: 440544

Cable gland SKINDICHT® SVRX 5641-W, cable gland, M 56, clamping range (min./max.): 38 - 41.5 mm, halogen-free, UV-resistant, IP 56, , Areas of application: offshore, shipbuilding, high-performance engines, the cable gland according to DIN 89280 with round intermediate socket made of brass, bare, wind turbines, Benefits: SKINDICHT® SVRX 105x2 for cable cross-sections up to 83 mm, EMC version for cables with large cross-sections
Lieske Part No.: 1230626

Cable gland SKINDICHT® SVRX 7244-W, cable gland, M 72, clamping range (min./max.): 41 - 44.5 mm, halogen-free, UV-resistant, IP 56, , Areas of application: offshore, shipbuilding, high-performance engines, the cable gland according to DIN 89280 with round intermediate socket made of brass, bare, wind turbines, Benefits: SKINDICHT® SVRX 105x2 for cable cross-sections up to 83 mm, EMC version for cables with large cross-sections
Lieske Part No.: 440549

Locknut SKINDICHT® SM/SVRX 72X2, locknut, M 72, wrench size: 85mm, nickel-plated brass, areas of application: offshore, shipbuilding, high-performance engines, cable gland according to DIN 89280 with round intermediate socket made of brass, bare, wind turbines, benefits: SKINDICHT® SVRX 105x2 for cable cross-sections up to 83 mm, EMC version for cables with large cross-sections
Lieske Part No.: 892198

Cable gland SKINDICHT® SVRX 7248-W, cable gland, M 72, clamping range (min./max.): 44 - 48.5 mm, halogen-free, UV-resistant, IP 56, , Areas of application: offshore, shipbuilding, high-performance engines, the cable gland according to DIN 89280 with round intermediate socket made of brass, bare, wind turbines, Benefits: SKINDICHT® SVRX 105x2 for cable cross-sections up to 83 mm, EMC version for cables with large cross-sections
Lieske Part No.: 1230625

Cable gland SKINDICHT® SVRX 7252-W, cable gland, M 72, clamping range (min./max.): 48 - 52.5 mm, halogen-free, UV-resistant, IP 56, , Areas of application: offshore, shipbuilding, high-performance engines, the cable gland according to DIN 89280 with round intermediate socket made of brass, bare, wind turbines, Benefits: SKINDICHT® SVRX 105x2 for cable cross-sections up to 83 mm, EMC version for cables with large cross-sections
Lieske Part No.: 440550

Cable gland SKINDICHT® SVRX 7256-W, cable gland, M 72, clamping range (min./max.): 52 - 56.5 mm, halogen-free, UV-resistant, IP 56, , Areas of application: offshore, shipbuilding, high-performance engines, the cable gland according to DIN 89280 with round intermediate socket made of brass, bare, wind turbines, Benefits: SKINDICHT® SVRX 105x2 for cable cross-sections up to 83 mm, EMC version for cables with large cross-sections
Lieske Part No.: 932489

Cable gland SKINDICHT® SVRX 8066-W, cable gland, M 80, clamping range (min./max.): 62 - 66 mm, halogen-free, UV-resistant, IP 56, , Application areas: offshore, shipbuilding, high-performance engines, the cable gland according to DIN 89280 with round intermediate socket made of brass, bare, wind turbines, Benefits: SKINDICHT® SVRX 105x2 for cable cross-sections up to 83 mm, EMC version for cables with large cross-sections
Lieske Part No.: 1230624

Cable gland SKINDICHT® SVRX 8059-W, cable gland, M 80, clamping range (min./max.): 56 - 59 mm, halogen-free, UV-resistant, IP 56, , Application areas: offshore, shipbuilding, high-performance engines, the cable gland according to DIN 89280 with round intermediate socket made of brass, bare, wind turbines, Benefits: SKINDICHT® SVRX 105x2 for cable cross-sections up to 83 mm, EMC version for cables with large cross-sections
Lieske Part No.: 440552

Reduction SKINDICHT® MR-M 72X2/63X1.5, reduction, internal thread: M 63, external thread: M 72, nickel-plated brass, , Areas of application: Withstands high chemical and mechanical stress, Suitable for outdoor use, For use with a metric cable gland whose connection thread is smaller than the existing threaded hole, Benefits: Provides flexibility when selecting a cable gland, as the selection is independent of the threaded hole of the housing, Article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive, Corrects the size difference between the connection thread of a cable gland and the threaded hole in a housing
Lieske Part No.: 460002

Reduction SKINDICHT® MR-M 80X2 / M 75X1.5 MS BLANK, reduction, internal thread: M 75, external thread: M 80, nickel-plated brass, , Areas of application: For use with a metric cable gland whose connection thread is smaller than the existing threaded hole, Withstands high chemical and mechanical stress, Benefits: Corrects the size difference between the connection thread of a cable gland and the threaded hole in a housing, Provides flexibility when selecting a cable gland, as the selection is independent of the threaded hole of the housing, Article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties 'Lead-free' articles do not contain any lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive
Lieske Part No.: 460003

Flat cable entry SKINDICHT® FL1, flat cable entry, flat cable width (min./max.) 0.0 - 70.0 mm, flat cable height (min./max.) 0.0 - 15.0 mm, uncoated aluminum, halogen-free, UV-resistant, IP 65, areas of application: conveyors, universally applicable cable flange, mainly for large flat cables, energy chain, crane and conveyor system construction, elevator construction, benefits: the sealing inserts are pressed onto the cable via the conical inner contour in the upper part of the housing, sealing profiles allow many individual problem solutions, several flat and round cables can be inserted at the same time
Lieske Part No.: 1312270

Flat cable entry SKINDICHT® FL4, flat cable entry, flat cable width (min./max.) 0.0 - 63.0 mm, flat cable height (min./max.) 0.0 - 12.0 mm, uncoated aluminum, halogen-free, UV-resistant, IP 65, areas of application: conveyors, universally applicable cable flange, mainly for large flat cables, energy chain, crane and conveyor system construction, elevator construction, benefits: the sealing inserts are pressed onto the cable via the conical inner contour in the upper part of the housing, sealing profiles allow many individual problem solutions, several flat and round cables can be inserted at the same time
Lieske Part No.: 1231200

Flat cable entry SKINDICHT® FL5, flat cable entry, flat cable width (min./max.) 0.0 - 70.0 mm, flat cable height (min./max.) 0.0 - 15.0 mm, uncoated aluminum, halogen-free, UV-resistant, IP 65, areas of application: conveyors, universally applicable cable flange, mainly for large flat cables, energy chain, crane and conveyor system construction, elevator construction, benefits: the sealing inserts are pressed onto the cable via the conical inner contour in the upper part of the housing, sealing profiles allow many individual problem solutions, several flat and round cables can be inserted at the same time
Lieske Part No.: 438914

Cable gland SKINDICHT® SHVE PG 13.5/9/11/7, cable gland, PG 13.5, clamping range (min./max.): 8.5 - 10.8 mm, nickel-plated brass, UV-resistant, IP 67, IP 66, IP 65, IP 68 - 10 bar, EMC shielding, areas of application: medical technology, earthing cable gland, areas of application wherever electrical interference fields can occur, frequency converters, airports, measurement, control and regulation technology, benefits: optimal, low-resistance 360° shield contact, high protection class, high strain relief
Sales unit: 25 pieces
Lieske Part No.: 440482

Cable gland SKINDICHT® SHVE PG 16/11/11/8, cable gland, PG 16, clamping range (min./max.): 8.5 - 10.8 mm, nickel-plated brass, UV-resistant, IP 67, IP 66, IP 65, IP 68 - 10 bar, EMC shielding, areas of application: medical technology, earthing cable gland, areas of application wherever electrical interference fields can occur, frequency converters, airports, measurement, control and regulation technology, benefits: optimal, low-resistance 360° shield contact, high protection class, high strain relief
Sales unit: 25 pieces
Lieske Part No.: 440488

Cable gland SKINDICHT® SHVE PG 16/11/13/9, cable gland, PG 16, clamping range (min./max.): 10.8 - 12.8 mm, nickel-plated brass, UV-resistant, IP 67, IP 66, IP 65, IP 68 - 10 bar, EMC shielding, areas of application: medical technology, earthing cable gland, areas of application wherever electrical interference fields can occur, frequency converters, airports, measurement, control and regulation technology, benefits: optimal, low-resistance 360° shield contact, high protection class, high strain relief
Sales unit: 25 pieces
Lieske Part No.: 439488

Cable gland SKINDICHT® SHVE PG 21/16/16/12, cable gland, PG 21, clamping range (min./max.): 14 - 15.8 mm, nickel-plated brass, UV-resistant, IP 67, IP 66, IP 65, IP 68 - 10 bar, EMC shielding, areas of application: medical technology, earthing cable gland, areas of application wherever electrical interference fields can occur, frequency converters, airports, measurement, control and regulation technology, benefits: optimal, low-resistance 360° shield contact, high protection class, high strain relief
Sales unit: 25 pieces
Lieske Part No.: 439491