Busbar terminal 50-185mm² at 12x5mm / 25mm²-120mm² at 12x10mm, Al/Cu conductor. Meter cabinet solution cabinet housing according to DIN VDE 0603/1, dimensional standard DIN 43 870 for surface-mounted, flush-mounted or partially recessed installation. Consists of a cabinet with door made of powder-coated, baked-in, stably profiled 1 mm thick sheet steel. Interior lining made entirely of plastic. Cable entries at the top and bottom through built-in plastic flange plates. Rear pre-punched part in the plastic part. Busbar bushings as flanges on both sides that can be opened without tools in the lower area as a way of connecting busbars between different cabinets or in conjunction with a cable junction box and connection set. In addition to the bushing in the NAR, there are also openings in the area of the AAR (for heights of 1100 and 1400 mm) and RfZ (for heights of 1100 mm). Door flush with the front with internal, adjustable hinges, can be opened on the right or left with an opening angle of 110°. Door lock with cam lock. Door lock can be replaced with other locks. Cabinets can be flanged next to each other or one above the other. Cabinet size 1 to 5 fields with 72 to 540 space units (PLE). Note: The main line must be inserted into the lower connection compartment of the meter cabinet from below or from the side and connected there in accordance with VDE-AR-N 4100:2019-04. Height: __ mm (1100mm or 1400mm) Width: __ mm Depth: 205 / 160 mm, RAL color: 9010 Protection type 44, protection class II Nominal current of the busbar system 250 A Design in accordance with VDE-AR-N 4100:2019-04 Meter system for __ meter space(s). According to the technical connection conditions (TAB) of the VNB __ for: __ Electronic household meters (eHZ) or __ meters with 3-point fastening (3HZ). __ for supply systems with normal household consumption max. 63 A (10mm²) according to DIN 18015-1 (__ apartments, __ general, __ reserve, __ heat pump) __ for continuous current applications max. 32 A (10 mm²) according to VDE-AR-N 4100:2019-04 (e.g. PV up to 22 KW) __ for continuous current applications max. 44 A (16 mm²) according to VDE-AR-N 4100:2019-04 (e.g. PV up to 30 KW) __ for meter locations with more than 63 A in intermittent operation or 44 A in continuous operation (transformer measurement) Nominal current _ A, nominal power _ kW __ Tariff ripple control receiver as three-point version alternatively __ Tariff ripple control receiver as top-hat rail version __ Distribution panel (__ PLE), with/without busbars for feeding in __ Distribution panel (__ PLE) with APZ room according to VDE-AR-N 4100:2019-04, with/without busbars for feed-in __ Communication panel, 1- or 2-panel __ Communication panel with APZ room according to VDE-AR-N 4100:2019-04, with/without busbars for feed-in __ SLS switch Hager HTS3xxE in __ A.. Voltage tap for power supply additional devices according to VDE-AR-N 4100:2019-04: __ before the SLS with fuse box pluggable 25 kA __ before the SLS with LS switch 10 A / 25 kA __ behind the SLS with fuse box pluggable 25 kA. Surge protection with combination arrester type 1/2/3 for busbar mounting in the UAR.To comply with the requirements of DIN VDE 0100-443 and -534: ___for TNS/TT network, without external lightning protection, back-up fuse in the HAK - 160 A ___for TNC network, without external lightning protection, back-up fuse in the HAK - 160 A ___for TNS/TT network, with external lightning protection, back-up fuse in the HAK - 160 A ___for TNC network, with external lightning protection, back-up fuse in the HAK - 160 A ___for TNS/TT network, with external lightning protection, back-up fuse in the HAK - 315 A ___for TNC network, with external lightning protection, back-up fuse in the HAK - 315 A Fuse for cellar, washing machine, dryer (if TAB / DIN compliant) per WE (max. 6 PLE) __ pieces of FI/LS switch 10 kA, 16 A, 30 mA (ADA516D). General distribution panel equipped with: __ pcs. LS switch 6 kA, 16 A (MBS116) __ pcs. FI/LS switch 6 kA, 16 A, 30 mA (ADS916D) __ pcs. RCD type 40 A 4-pole, 30 mA (CDS440D). Consisting of: __ pcs. ZB__S, meter cabinet __ pcs. ZK__ Complete panel for __ meters __ selected make/type: HAGER/univers Z or equivalent, supply, install and make ready for operation.
Lieske Part No.: 410148

Control line terminal, universalZ, 7-pole, up to 2.5 mm². Meter cabinet solution cabinet housing according to DIN VDE 0603/1, dimensional standard DIN 43 870 for surface-mounted, flush-mounted or partially recessed installation. Consists of a cabinet with door made of powder-coated, baked-in, stably profiled 1 mm thick sheet steel. Interior lining made entirely of plastic. Cable entries at the top and bottom through built-in plastic flange plates. Rear knockout in the plastic part. Busbar bushings as flanges on both sides that can be opened without tools in the lower area as a way of connecting busbars between different cabinets or in conjunction with a cable junction box and connection set. In addition to the bushing in the NAR, there are also openings in the area of the AAR (for heights 1100 and 1400 mm) and RfZ (for heights 1100 mm). Door flush with the front with internal, adjustable hinges, can be opened on the right or left with an opening angle of 110°. Door lock with cam lock. Door lock can be replaced with other locks. Cabinets can be flanged next to each other or one above the other. Cabinet size 1 to 5 fields with 72 to 540 space units (PLE). Note: The main line must be inserted into the lower connection compartment of the meter cabinet from below or from the side and connected there in accordance with VDE-AR-N 4100:2019-04. Height: __ mm (1100mm or 1400mm) Width: __ mm Depth: 205 / 160 mm, RAL color: 9010 Protection type 44, protection class II Nominal current of the busbar system 250 A Design in accordance with VDE-AR-N 4100:2019-04 Meter system for __ meter space(s). According to the technical connection conditions (TAB) of the VNB __ for: __ Electronic household meters (eHZ) or __ meters with 3-point fastening (3HZ). __ for supply systems with normal household consumption max. 63 A (10mm²) according to DIN 18015-1 (__ apartments, __ general, __ reserve, __ heat pump) __ for continuous current applications max. 32 A (10 mm²) according to VDE-AR-N 4100:2019-04 (e.g. PV up to 22 KW) __ for continuous current applications max. 44 A (16 mm²) according to VDE-AR-N 4100:2019-04 (e.g. PV up to 30 KW) __ for meter locations with more than 63 A in intermittent operation or 44 A in continuous operation (transformer measurement) Nominal current _ A, nominal power _ kW __ Tariff ripple control receiver as three-point version alternatively __ Tariff ripple control receiver as top-hat rail version __ Distribution panel (__ PLE), with/without busbars for feeding in __ Distribution panel (__ PLE) with APZ room according to VDE-AR-N 4100:2019-04, with/without busbars for feed-in __ Communication panel, 1- or 2-panel __ Communication panel with APZ room according to VDE-AR-N 4100:2019-04, with/without busbars for feed-in __ SLS switch Hager HTS3xxE in __ A.. Voltage tap for power supply additional devices according to VDE-AR-N 4100:2019-04: __ before the SLS with fuse box pluggable 25 kA __ before the SLS with LS switch 10 A / 25 kA __ behind the SLS with fuse box pluggable 25 kA. Surge protection with combination arrester type 1/2/3 for busbar mounting in the UAR.To comply with the requirements of DIN VDE 0100-443 and -534: ___for TNS/TT network, without external lightning protection, back-up fuse in the HAK - 160 A ___for TNC network, without external lightning protection, back-up fuse in the HAK - 160 A ___for TNS/TT network, with external lightning protection, back-up fuse in the HAK - 160 A ___for TNC network, with external lightning protection, back-up fuse in the HAK - 160 A ___for TNS/TT network, with external lightning protection, back-up fuse in the HAK - 315 A ___for TNC network, with external lightning protection, back-up fuse in the HAK - 315 A Fuse for cellar, washing machine, dryer (if TAB / DIN compliant) per WE (max. 6 PLE) __ pieces of FI/LS switch 10 kA, 16 A, 30 mA (ADA516D). General distribution panel equipped with: __ pcs. LS switch 6 kA, 16 A (MBS116) __ pcs. FI/LS switch 6 kA, 16 A, 30 mA (ADS916D) __ pcs. RCD type 40 A 4-pole, 30 mA (CDS440D). Consisting of: __ pcs. ZB__S, meter cabinet __ pcs. ZK__ Complete panel for __ meters __ selected make/type: HAGER/univers Z or equivalent, supply, install and connect ready for operation.
Lieske Part No.: 717804

Busbar terminal up to 16mm² for SaS 10x3mm Cu
Lieske Part No.: 630060

N - Busbar holder for 10x3mm busbar
Lieske Part No.: 819818

N-busbar 10x3mm, length 1m, tinned copper
Lieske Part No.: 384321

Busbar terminal 16-35mm² for N-busbar KW1NBB
Lieske Part No.: 982745

End angle up to 35mm², screw technology
Lieske Part No.: 149181

End angle up to 150mm², screw technology
Lieske Part No.: 702011

End angle plug technology
Lieske Part No.: 298066

End plate for KXA02NH, KXA04NH, color: blue
Lieske Part No.: 2112155

End plate for KXA02LH, KXA04LH, colour: grey
Lieske Part No.: 289616

End plate for KXA02E, color: green
Lieske Part No.: 1768244

End plate for KXA06NH, color: blue
Lieske Part No.: 272178

End plate for KXA06LH, colour: grey
Lieske Part No.: 334874

End plate for KXA35L, colour: grey
Lieske Part No.: 541295

End plate for KXA10L ,KXA16L, color: grey
Lieske Part No.: 928149

End plate for KXA10E, KXA16E, color: green
Lieske Part No.: 1881718

End plate for KXA10NH, color: blue
Lieske Part No.: 2112156

End plate for KXA16NH, color: blue
Lieske Part No.: 1881719

End plate for KXA16LH, colour: grey
Lieske Part No.: 314380

Endplatte für KYA02LH3, KYA02LP, KYA02KD, Farbe: grau Verkaufseinheit: 1 ST.
Lieske Part No.: 1354860

Endplatte für KYA16LH2, Farbe: grau Verkaufseinheit: 1 ST.
Lieske Part No.: 1354874

End plate for KXA16ND ,KXA10ND, color: blue
Lieske Part No.: 452751

End plate for KYA02NH, KYA04NH, color: blue
Lieske Part No.: 333984

End plate for KYA02LH, KYA04LH, colour: grey
Lieske Part No.: 238725

End plate for KYA02I2 - I3 - I4 - I5, colour: grey
Lieske Part No.: 566286

End plate for KXA04 I2 I3 I4 I5 I6, colour: grey
Lieske Part No.: 395539

End plate for KXA04 I1 I7, colour: grey
Lieske Part No.: 660152

End plate for KXA04ND, color: blue
Lieske Part No.: 571045

End plate for KXA04VB, KXA04LX, color: grey
Lieske Part No.: 651462

End plate for KYA02I1, colour: grey
Lieske Part No.: 769268

Isolated vertical jumper
Lieske Part No.: 1881720

Insulated cross connector 2.5mm², 10-way, screw technology
Lieske Part No.: 362135

Insulated cross connector 2.5mm², 2-way, screw technology
Lieske Part No.: 221788

Insulated cross connector 2.5mm², 3-way, screw technology
Lieske Part No.: 477489

Insulated cross connector, 2.5mm², 2-way, plug-in technology
Lieske Part No.: 893906

Insulated cross connector 4mm², 12-way, screw technology
Lieske Part No.: 645353

Insulated cross connector 4mm², 2-way, screw technology
Lieske Part No.: 161122

Insulated cross connector 4mm², 3-way, screw technology
Lieske Part No.: 229926

Insulated cross connector 4mm², 10-way, screw technology
Lieske Part No.: 112609

Insulated cross connector 4mm², 2-way, screw technology
Lieske Part No.: 384871

Insulated cross connector 4mm², 3-way, screw technology
Lieske Part No.: 244580

Insulated cross connector 4mm², 2-way, plug-in technology
Lieske Part No.: 323576

Insulated cross connector 10mm², 10-way, screw technology
Lieske Part No.: 169650

Insulated cross connector 10mm², 2-way, screw technology
Lieske Part No.: 352409

Insulated cross connector 10mm², 3-way, screw technology
Lieske Part No.: 863650

Insulated cross connector 10mm², 2-way, plug-in technology
Lieske Part No.: 323724

Insulated cross connector 16mm², 10-way, screw technology
Lieske Part No.: 324992

Insulated cross connector 16mm², 2-way, screw technology
Lieske Part No.: 891448

Insulated cross connector 16mm², 3-way, screw technology
Lieske Part No.: 418813