Online retailer for industrial customers, commercial customers and public institutions - no sales to private customers
Switch to german languageIndustry-Electronics in English

Eaton 170285 FRCMM-16/4/003-A RCD switch 16 A 4p 30 mA Type A

Your rating:
Average rating
product review for Eaton 170285 FRCMM-16/4/003-A RCD switch 16 A 4p 30 mA Type A
( 4 / 5 ) 1 ratings
Eaton 170285
This image may differ from the desired article.
184,30 EUR 192,06 EUR
( 219,32 EUR incl. VAT )
≈ £154.26  |  ≈ $202.55
plus delivery charges: 55,00 €
Made to order · Delivery time approx. 20 workdaysinfo_outline
1x Eaton 170285 FRCMM-16/4/003-A RCD switch 16 A 4p 30 mA Type A
Lieske Part No.:580531
Mfg Part No: 170285
UPC/EAN: 4015081667840
Weight:0.376 kg
Type:FRCMM-16/4/003-A
Graduated prices net
From piecesPrice per pieces
5177,39 EUR
10170,48 EUR
15163,57 EUR
20156,66 EUR

Product information for Eaton 170285:

The residual current circuit breaker FRCMM-16/4/003-A from Eaton is a 4-pole switching device for use in industrial and extended commercial installations. It ensures electrical safety by disconnecting the power supply upon detection of a fault current, protecting personnel and equipment from dangerous touch or fault current situations. The device is rated for a nominal current of 16 A and features a rated short-circuit withstand capacity of 10 kA, with the nominal short-circuit withstand capacity under upstream fuse protection. The rated residual current is 0.03 A, corresponding to Type A, suitable for detecting pulsating fault currents.

Applications
This circuit breaker is designed for use in industrial environments and extended commercial installations where high safety requirements and operational reliability are necessary. It is particularly suitable for installations with electronic loads that may generate pulsating fault currents, such as lighting systems, IT infrastructures, or machine controls. The 4-pole configuration allows disconnection of all conductors, including the neutral conductor, which is required in certain applications.

Functions and Features in Detail
The switch detects fault currents from 0.03 A and automatically trips to interrupt dangerous current flow. The Type A configuration ensures detection of pulsating fault currents, which can occur with modern electronic devices. The rated short-circuit withstand capacity of 10 kA under upstream fuse protection safeguards the device against thermal and mechanical stresses during short-circuit events. The 4-pole construction enables safe disconnection of all phases and the neutral conductor, which is necessary in certain circuits.

Technical Explanation
The residual current circuit breaker operates on the principle of differential current measurement. It compares the current flowing into the load with the current returning. A difference of at least 0.03 A indicates a fault current, triggering the switch to trip. The Type A configuration allows detection of pulsating currents, which occur in devices with rectifier or switch-mode power supply technology. The rated short-circuit withstand capacity of 10 kA under upstream fuse protection means the device can safely disconnect during a short-circuit up to 10 kA, provided an upstream fuse is installed in the circuit.

Compatibility and Accessories
Various accessories are available for this circuit breaker to extend its functionality. These include the reclosing device Z-FW-LP (230 VAC), the remote test module Z-FW/003 (0.03 A), the remote control module Z-FW-MO (ON/OFF/TEST), and the reclosing device set Z-FW-LP/MO. Additionally, the auxiliary switch Z-HK (1NO1NC) and the trip signal switch Z-NHK (2W) are available. These modules can be used depending on requirements for remote control, monitoring, or automatic re-energization of the switch.

Mounting and Installation
The circuit breaker is designed for panel mounting in standard installation enclosures. Installation is carried out in the usual manner within a suitable enclosure or distribution box. The mounting width corresponds to the standard for panel-mounted devices. Electrical connections are made via the designated terminal clamps, with attention to correct polarity and conductor assignment.

Operational Advantages
The use of the FRCMM-16/4/003-A provides high safety through detection of pulsating fault currents. The 4-pole configuration enables complete disconnection of the power supply, which is required in certain installations. The combination with accessory modules extends functionality, e.g., for remote monitoring or automated re-energization. Its reliability under high short-circuit currents with upstream fuse protection makes it suitable for industrial applications.

General
Rated current16 A
Rated short-circuit withstand capacity10 kA
Rated fault current0,03 A
Protection typeA
Number of poles4
Application rangeindustrial and extended commercial applications
Short-circuit resistance with upstream fuseYes


Questions & answers

What is the delivery time of Eaton 170285 FRCMM-16/4/003-A RCD switch 16 A 4p 30 mA Type A ?

The article Eaton 170285 FRCMM-16/4/003-A RCD switch 16 A 4p 30 mA Type A is currently not in stock and must be ordered on a per-order basis.

According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Eaton 170285 to our sales team for an exact delivery time.

How can I buy the item at a lower price?

We offer you Eaton 170285 FRCMM-16/4/003-A RCD switch 16 A 4p 30 mA Type A always at the best possible price. We can give you a discount of 2% on Eaton 170285 FRCMM-16/4/003-A RCD switch 16 A 4p 30 mA Type A if you choose payment in advance on ordering.

In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 5 pieces of Eaton 170285 FRCMM-16/4/003-A RCD switch 16 A 4p 30 mA Type A we can offer you a price of 177,39 EUR per piece. The more you buy, the cheaper the article will be.

We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

 


This product is recommended as accessory for

Eaton 248296 Z-FW-LP re-energizing device 230 VAC Eaton 248296 Z-FW-LP re-energizing device 230 VAC Contour-compatible, subsequently attachable switching device for automatic restarting and remote switching of CLS6, PFIM, PFHM-4p, dRCM, Z-A40, PFR, Z-MS, mechanically lockable and sealable, ...

Lieske Part No.: 359453
Mfg Part No: 248296
Type: Z-FW-LP
639,10 EUR 666,01 EUR
Eaton 248296 plus VAT
≈ £534.93  |  ≈ $702.37
Made to order · Delivery time approx. 20 workdaysinfo_outline
Eaton 248298 Z-FW/003 remote test module 0.03 A Eaton 248298 Z-FW/003 remote test module 0.03 A External test module with test resistance for residual current devices, design adapted to the rated residual current, 'external' test button function in accordance with regulations, for remote testing ...

Lieske Part No.: 594708
Mfg Part No: 248298
Type: Z-FW/003
-75% 38,94 EUR 155,76 EUR
Eaton 248298 plus VAT
≈ £32.59  |  ≈ $42.80
Made to order · Delivery time approx. 20 workdaysinfo_outline
Eaton 284730 Z-FW-MO remote control module ON/OFF/TEST Eaton 284730 Z-FW-MO remote control module ON/OFF/TEST Contour-compatible, subsequently attachable switching device for automatic restarting and remote switching of CLS6, PFIM, PFHM-4p, dRCM, Z-A40, PFR, Z-MS, mechanically lockable and sealable, ...

Lieske Part No.: 603496
Mfg Part No: 284730
Type: Z-FW-MO
201,14 EUR 209,61 EUR
Eaton 284730 plus VAT
≈ £168.35  |  ≈ $221.05
Made to order · Delivery time approx. 20 workdaysinfo_outline
Eaton 290171 Z-FW-LP/MO reclosing device set 230 VAC Eaton 290171 Z-FW-LP/MO reclosing device set 230 VAC Set consisting of reclosing device Z-FW-LP and switching module Z-FW-MO

Lieske Part No.: 774788
Mfg Part No: 290171
Type: Z-FW-LP/MO
889,78 EUR 927,24 EUR
Eaton 290171 plus VAT
≈ £744.75  |  ≈ $977.87
Made to order · Delivery time approx. 20 workdaysinfo_outline
Eaton 248432 Z-HK auxiliary switch 1NO1NC Eaton 248432 Z-HK auxiliary switch 1NO1NC Design according to IEC/EN 60947-5-1, IEC/EN 62019, can be retrofitted (screws), specified minimum voltages apply per switching distance, special attention for series connections!, Z-AHK, Z-NHK: ...

Lieske Part No.: 864970
Mfg Part No: 248432
Type: Z-HK
120,08 EUR 125,14 EUR
Eaton 248432 plus VAT
≈ £100.51  |  ≈ $131.97
Made to order · Delivery time approx. 20 workdaysinfo_outline
Eaton 248434 Z-NHK trip signal switch 2W Eaton 248434 Z-NHK trip signal switch 2W Design according to IEC/EN 60947-5-1, IEC/EN 62019, can be retrofitted (screws), specified minimum voltages apply per switching distance, special attention for series connections!, function of one of ...

Lieske Part No.: 937028
Mfg Part No: 248434
Type: Z-NHK
32,70 EUR 34,08 EUR
Eaton 248434 plus VAT
≈ £27.37  |  ≈ $35.94
Made to order · Delivery time approx. 20 workdaysinfo_outline
Eaton 265244 Z-FW-LPD reclosing device 24-48 V DC Eaton 265244 Z-FW-LPD reclosing device 24-48 V DC Contour-compatible, subsequently attachable switching device for automatic restarting and remote switching of CLS6, PFIM, PFHM-4p, dRCM, Z-A40, PFR, Z-MS, mechanically lockable and sealable, ...

Lieske Part No.: 1231871
Mfg Part No: 265244
Type: Z-FW-LPD
639,10 EUR 666,01 EUR
Eaton 265244 plus VAT
≈ £534.93  |  ≈ $702.37
Made to order · Delivery time approx. 20 workdaysinfo_outline

Fitting accessory for Eaton 170285 FRCMM-16/4/003-A RCD switch 16 A 4p 30 mA Type A

Eaton 248296 Z-FW-LP re-energizing device 230 VAC Eaton 248296 Z-FW-LP re-energizing device 230 VAC Contour-compatible, subsequently attachable switching device for automatic restarting and remote switching of CLS6, PFIM, PFHM-4p, dRCM, Z-A40, PFR, Z-MS, mechanically lockable and sealable, ...

Lieske Part No.: 359453
Mfg Part No: 248296
Type: Z-FW-LP
639,10 EUR 666,01 EUR
Eaton 248296 plus VAT
≈ £534.93  |  ≈ $702.37
Made to order · Delivery time approx. 20 workdaysinfo_outline
Eaton 248298 Z-FW/003 remote test module 0.03 A Eaton 248298 Z-FW/003 remote test module 0.03 A External test module with test resistance for residual current devices, design adapted to the rated residual current, 'external' test button function in accordance with regulations, for remote testing ...

Lieske Part No.: 594708
Mfg Part No: 248298
Type: Z-FW/003
-75% 38,94 EUR 155,76 EUR
Eaton 248298 plus VAT
≈ £32.59  |  ≈ $42.80
Made to order · Delivery time approx. 20 workdaysinfo_outline
Eaton 284730 Z-FW-MO remote control module ON/OFF/TEST Eaton 284730 Z-FW-MO remote control module ON/OFF/TEST Contour-compatible, subsequently attachable switching device for automatic restarting and remote switching of CLS6, PFIM, PFHM-4p, dRCM, Z-A40, PFR, Z-MS, mechanically lockable and sealable, ...

Lieske Part No.: 603496
Mfg Part No: 284730
Type: Z-FW-MO
201,14 EUR 209,61 EUR
Eaton 284730 plus VAT
≈ £168.35  |  ≈ $221.05
Made to order · Delivery time approx. 20 workdaysinfo_outline
Eaton 290171 Z-FW-LP/MO reclosing device set 230 VAC Eaton 290171 Z-FW-LP/MO reclosing device set 230 VAC Set consisting of reclosing device Z-FW-LP and switching module Z-FW-MO

Lieske Part No.: 774788
Mfg Part No: 290171
Type: Z-FW-LP/MO
889,78 EUR 927,24 EUR
Eaton 290171 plus VAT
≈ £744.75  |  ≈ $977.87
Made to order · Delivery time approx. 20 workdaysinfo_outline
Eaton 248432 Z-HK auxiliary switch 1NO1NC Eaton 248432 Z-HK auxiliary switch 1NO1NC Design according to IEC/EN 60947-5-1, IEC/EN 62019, can be retrofitted (screws), specified minimum voltages apply per switching distance, special attention for series connections!, Z-AHK, Z-NHK: ...

Lieske Part No.: 864970
Mfg Part No: 248432
Type: Z-HK
120,08 EUR 125,14 EUR
Eaton 248432 plus VAT
≈ £100.51  |  ≈ $131.97
Made to order · Delivery time approx. 20 workdaysinfo_outline
Eaton 248434 Z-NHK trip signal switch 2W Eaton 248434 Z-NHK trip signal switch 2W Design according to IEC/EN 60947-5-1, IEC/EN 62019, can be retrofitted (screws), specified minimum voltages apply per switching distance, special attention for series connections!, function of one of ...

Lieske Part No.: 937028
Mfg Part No: 248434
Type: Z-NHK
32,70 EUR 34,08 EUR
Eaton 248434 plus VAT
≈ £27.37  |  ≈ $35.94
Made to order · Delivery time approx. 20 workdaysinfo_outline
Eaton 265244 Z-FW-LPD reclosing device 24-48 V DC Eaton 265244 Z-FW-LPD reclosing device 24-48 V DC Contour-compatible, subsequently attachable switching device for automatic restarting and remote switching of CLS6, PFIM, PFHM-4p, dRCM, Z-A40, PFR, Z-MS, mechanically lockable and sealable, ...

Lieske Part No.: 1231871
Mfg Part No: 265244
Type: Z-FW-LPD
639,10 EUR 666,01 EUR
Eaton 265244 plus VAT
≈ £534.93  |  ≈ $702.37
Made to order · Delivery time approx. 20 workdaysinfo_outline
Searching
Search is performed.
Please be patient ...
Fehlende Felder
Close
Product in the shopcart

The following item has been put into your shopping cart by our system:

1x Moeller 170285 FRCMM-16/4/003-A residual current circuit breaker 4-pole 30 mA Type A
Eaton 170285 FRCMM-16/4/003-A RCD switch 16 A 4p 30 mA Type A
184,30 EUR
Sum of all articles in cart
plus VAT
You can continue shopping and open your cart at any time from the top menu bar or now directly by clicking the button.
Enquiry: Moeller 170285 FRCMM-16/4/003-A residual current circuit breaker 4-pole 30 mA Type A
Company name
Name
Homepage
Street
ZIP-Code City
Country
Telephone
Desired quantity
Comment
4 + 6 =
Data protection notice: The data entered here will only be electronically stored and processed for the purpose of responding to your inquiry in accordance with Art. 6 GDPR para. 1b. The basis for this is our privacy policy.
Name and email address are the only mandatory fields.

We use cookies. Some are required to run the shop (e.g. shopping cart and login), others help us improve it (Google Analytics). Statistics cookies are only used with your consent. See our privacy policy for details.