Online retailer for industrial customers, commercial customers and public institutions - no sales to private customers
Switch to german languageIndustry-Electronics in English
Draka Comteq Logo

Draka Comteq A-2YF(L)2Y 4x2x0.8 mm² St.III Bd. telephone cable for underground installation VDE0816

Your rating:
Average rating
product review for Draka Comteq A-2YF(L)2Y 4x2x0.8 mm² St.III Bd. telephone cable for underground installation VDE0816
( 4.5 / 5 ) 19 ratings
Draka Comteq A-2YF(L)2Y 4 X 2 X 0,8
This image may differ from the desired article.
2,78 EUR
incl. 0,45 EUR copper surcharge
( 3,31 EUR incl. VAT )
≈ £2.32  |  ≈ $3.06
plus delivery charges: 55,00 €
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
In Stock: >100 meters
1x Draka Comteq A-2YF(L)2Y 4x2x0.8 mm² St.III Bd. telephone cable for underground installation VDE0816
Lieske Part No.:177375
Mfg Part No:
Weight:0.095 kg
Type:A-2YF(L)2Y 4 X 2 X 0,8
Graduated prices net
From piecesPrice per meters
502,62 EUR
1002,47 EUR
2502,31 EUR
5002,15 EUR

Product information for Draka Comteq A-2YF(L)2Y 4 X 2 X 0,8:

The product is a telecommunications earth cable of type A-2YF(L)2Y 4 X 2 X 0,8, manufactured by Draka Comteq, and serves as a connection cable in local networks as well as in private branch exchange systems. It is specifically designed for the transmission of telephone signals and general signals and is suitable for installation in the ground, in cable ducts, and in pipes. The cable features a robust construction that meets the requirements of underground installation and is designed for use in telecommunications infrastructure.

Applications

The cable is used in local telephone networks and private branch exchange systems, where reliable signal transmission over long distances is required. It is intended for outdoor, underground, or enclosed pipe installations, with underground installation being the most common application. The construction ensures high mechanical stability and protection against external influences such as moisture and mechanical stress.

Functions and Equipment in Detail

The cable consists of single-strand, bare copper conductors with a diameter of 0.8 mm. Each conductor is insulated with PE (polyethylene), providing high electrical insulation and chemical resistance. The conductors are marked with black rings to enable easy identification and assignment within the network. The stranding is done in a star quad system: four conductors form a star quad, five star quads form a basic bundle, and five or ten basic bundles form a main bundle. These bundles are stranded to form the cable core, with petrolatum filling and core wrapping providing stabilization and protection against moisture.

Technology Explained Simply

The cable sheath consists of a layered sheath made of a 0.2 mm thick aluminium tape, coated on both sides with plastic and welded to a black PE sheath. This sheath protects the cable from mechanical stress and moisture. The sheath marking features continuous white markings containing the symbol of a telephone handset and a meter marking to identify the cable length and its application within the network. The rated voltage is 225 V, and the test voltage is 2000 V, highlighting the cable’s electrical load capacity and safety. The loop resistance is 73.2 Ohm/km, ensuring efficient signal transmission. The current-carrying capacity is 5.1 A, indicating the maximum current the cable can safely transmit. The operating capacitance is 55 nF/km, and the insulation resistance is 5 GOhm x km, demonstrating high insulation quality. The capacitive couplings K3 (800 Hz, 300 m) are 300 pF/400 pF, and the line attenuation is approximately 0.78 dB/km at 800 Hz, indicating low signal loss. The cable can be installed at temperatures from -20 °C to +50 °C and is designed for operation after installation at temperatures from -30 °C to +70 °C. The bending radius is 7.5 times the cable diameter, allowing flexible installation.

Compatibility and Accessories

The cable is designed for use in existing telephone networks and private branch exchange systems and is compatible with standard connection and installation techniques. It can be used in combination with other cables of the same type or compatible systems to expand or connect networks. Installation can take place in standard pipe conduits, cable ducts, or directly in the ground, taking into account the specific requirements of the respective installation.

Installation and Mounting

Installation involves laying the cable in the ground, in cable ducts, or in pipes. The installation must consider the specified temperature ranges and bending radius to avoid damage to the cable. Underground installation requires sufficient depth and protection against mechanical stress. The conductors are connected using suitable plug connectors or terminals appropriate for the specific application.

Operational Advantages

The cable offers high reliability and stability in signal transmission, even over long distances. The robust construction ensures a long service life and low maintenance costs. The clear marking of the conductors simplifies installation and maintenance. The high insulation quality and low line attenuation ensure clear and distortion-free signal transmission. Underground installation is simple and cost-efficient, making the cable an economical solution for telephone networks.

General
Conductor diameter0,8 mm
Wire insulationPE
Nominal voltage225 V
Test voltage2000 V
Loop resistance73,2 Ohm/km
Current carrying capacity5,1 A
Operating capacity55 nF/km
Insulation resistance5 GOhm x km
Capacitive couplings K3 (800 Hz, 300 m)300 pF/400 pF
Cable attenuation (800 Hz)0,78 dB/km
Temperature range (during installation)-20 °C - +50 °C
Temperature range (after installation)-30 °C - +70 °C
Bending radius7.5 x cable diameter
SheathAluminium tape shield with plastic coating and PE sheath
Sheath markingconsecutive telephone handsets and meter marking white
Stranding4 cores to star quad, 5 star quads to basic bundle, each 5 or 10 basic bundles to main bundle, twisted to cable core
Conductor markingby black rings
FillingPetrolatum
Core windingYes


Please note...
For this article, we charge 14,85 EUR for measuring, cutting and re-furling the cable. If you take a whole 100m or 500m cable reel, the charge will of course be dropped.

The final cable weight will be determined before invoicing. The calculation is based on the copper content and any additional weight due to drums, pallets, or outer packaging. Prices are subject to this subsequent calculation.

Please note that for cables, that are not in stock and must be produced, the manufacturer may need an order of a minimum length that can be 5-10km depending on cable type!
This article contains a copper surcharge of 0,45 EUR. This depends on daily copper prices and weight of included copper. You can inquire the copper price via phone under +49 7666 884990

Questions & answers

What is the delivery time of Draka Comteq A-2YF(L)2Y 4x2x0.8 mm² St.III Bd. telephone cable for underground installation VDE0816?

The article Draka Comteq A-2YF(L)2Y 4x2x0.8 mm² St.III Bd. telephone cable for underground installation VDE0816 is currently in stock

According to our experience the article is ready for dispatch within 2 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Draka Comteq A-2YF(L)2Y 4 X 2 X 0,8 to our sales team for an exact delivery time.

How can I buy the item at a lower price?

We offer you Draka Comteq A-2YF(L)2Y 4x2x0.8 mm² St.III Bd. telephone cable for underground installation VDE0816 always at the best possible price. We can give you a discount of 2% on Draka Comteq A-2YF(L)2Y 4x2x0.8 mm² St.III Bd. telephone cable for underground installation VDE0816 if you choose payment in advance on ordering.

In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 50 meters of Draka Comteq A-2YF(L)2Y 4x2x0.8 mm² St.III Bd. telephone cable for underground installation VDE0816 we can offer you a price of 2,62 EUR per piece. The more you buy, the cheaper the article will be.

We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

 


Searching
Search is performed.
Please be patient ...
Fehlende Felder
Close
Product in the shopcart

The following item has been put into your shopping cart by our system:

1x Draka Comteq A-2YF(L)2Y 4x2x0,8 Telephone Cable
Draka Comteq A-2YF(L)2Y 4x2x0.8 mm² St.III Bd. telephone cable for underground installation VDE0816
2,78 EUR
Sum of all articles in cart
plus VAT
You can continue shopping and open your cart at any time from the top menu bar or now directly by clicking the button.
Enquiry: Draka Comteq A-2YF(L)2Y 4x2x0,8 Telephone Cable
Company name
Name
Homepage
Street
ZIP-Code City
Country
Telephone
Desired quantity
Comment
2 + 3 =
Data protection notice: The data entered here will only be electronically stored and processed for the purpose of responding to your inquiry in accordance with Art. 6 GDPR para. 1b. The basis for this is our privacy policy.
Name and email address are the only mandatory fields.

We use cookies. Some are required to run the shop (e.g. shopping cart and login), others help us improve it (Google Analytics). Statistics cookies are only used with your consent. See our privacy policy for details.