Draka Comteq

Draka Comteq A-2YF(L)2Y 4x2x0,8 Telephone Cable

Cables > Underground cables > Telecommunications underground cable

Draka Comteq A-2YF(L)2Y 4x2x0,8 Telephone Cable

Lieske Part No. 177375
Mfg Part No
EAN-Code
Manufacturer Draka Comteq
Here only 2,78 EUR
3,31 EUR incl. VAT

Further information for Draka Comteq A-2YF(L)2Y 4x2x0,8 Telephone Cable

General
Conductor diameter0,8 mm
Wire insulationPE
Nominal voltage225 V
Test voltage2000 V
Loop resistance73,2 Ohm/km
Current carrying capacity5,1 A
Operating capacity55 nF/km
Insulation resistance5 GOhm x km
Capacitive couplings K3 (800 Hz, 300 m)300 pF/400 pF
Cable attenuation (800 Hz)0,78 dB/km
Temperature range (during installation)-20 °C - +50 °C
Temperature range (after installation)-30 °C - +70 °C
Bending radius7.5 x cable diameter
SheathAluminium tape shield with plastic coating and PE sheath
Sheath markingconsecutive telephone handsets and meter marking white
Stranding4 cores to star quad, 5 star quads to basic bundle, each 5 or 10 basic bundles to main bundle, twisted to cable core
Conductor markingby black rings
FillingPetrolatum
Core windingYes
The product is a telecommunications earth cable of type A-2YF(L)2Y 4 X 2 X 0,8, manufactured by Draka Comteq, and serves as a connection cable in local networks as well as in private branch exchange systems. It is specifically designed for the transmission of telephone signals and general signals and is suitable for installation in the ground, in cable ducts, and in pipes. The cable features a robust construction that meets the requirements of underground installation and is designed for use in telecommunications infrastructure.

Applications

The cable is used in local telephone networks and private branch exchange systems, where reliable signal transmission over long distances is required. It is intended for outdoor, underground, or enclosed pipe installations, with underground installation being the most common application. The construction ensures high mechanical stability and protection against external influences such as moisture and mechanical stress.

Functions and Equipment in Detail

The cable consists of single-strand, bare copper conductors with a diameter of 0.8 mm. Each conductor is insulated with PE (polyethylene), providing high electrical insulation and chemical resistance. The conductors are marked with black rings to enable easy identification and assignment within the network. The stranding is done in a star quad system: four conductors form a star quad, five star quads form a basic bundle, and five or ten basic bundles form a main bundle. These bundles are stranded to form the cable core, with petrolatum filling and core wrapping providing stabilization and protection against moisture.

Technology Explained Simply

The cable sheath consists of a layered sheath made of a 0.2 mm thick aluminium tape, coated on both sides with plastic and welded to a black PE sheath. This sheath protects the cable from mechanical stress and moisture. The sheath marking features continuous white markings containing the symbol of a telephone handset and a meter marking to identify the cable length and its application within the network. The rated voltage is 225 V, and the test voltage is 2000 V, highlighting the cable’s electrical load capacity and safety. The loop resistance is 73.2 Ohm/km, ensuring efficient signal transmission. The current-carrying capacity is 5.1 A, indicating the maximum current the cable can safely transmit. The operating capacitance is 55 nF/km, and the insulation resistance is 5 GOhm x km, demonstrating high insulation quality. The capacitive couplings K3 (800 Hz, 300 m) are 300 pF/400 pF, and the line attenuation is approximately 0.78 dB/km at 800 Hz, indicating low signal loss. The cable can be installed at temperatures from -20 °C to +50 °C and is designed for operation after installation at temperatures from -30 °C to +70 °C. The bending radius is 7.5 times the cable diameter, allowing flexible installation.

Compatibility and Accessories

The cable is designed for use in existing telephone networks and private branch exchange systems and is compatible with standard connection and installation techniques. It can be used in combination with other cables of the same type or compatible systems to expand or connect networks. Installation can take place in standard pipe conduits, cable ducts, or directly in the ground, taking into account the specific requirements of the respective installation.

Installation and Mounting

Installation involves laying the cable in the ground, in cable ducts, or in pipes. The installation must consider the specified temperature ranges and bending radius to avoid damage to the cable. Underground installation requires sufficient depth and protection against mechanical stress. The conductors are connected using suitable plug connectors or terminals appropriate for the specific application.

Operational Advantages

The cable offers high reliability and stability in signal transmission, even over long distances. The robust construction ensures a long service life and low maintenance costs. The clear marking of the conductors simplifies installation and maintenance. The high insulation quality and low line attenuation ensure clear and distortion-free signal transmission. Underground installation is simple and cost-efficient, making the cable an economical solution for telephone networks.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/177375
qrcode für Draka Comteq A-2YF(L)2Y 4x2x0,8 Telephone Cable