Online retailer for industrial customers, commercial customers and public institutions - no sales to private customers
Switch to german languageIndustry-Electronics in English

Dold 0061165 GF9016 3AC400-600V UH DC24V 11KW soft start device

Your rating:
Average rating
product review for Dold 0061165 GF9016 3AC400-600V UH DC24V 11KW soft start device
( 5 / 5 ) 2 ratings
Dold 0061165
This image may differ from the desired article.
619,03 EUR
( 736,65 EUR incl. VAT )
≈ £518.13  |  ≈ $680.31
plus delivery charges: 55,00 €
On order · Delivery time approx. 20 workdaysinfo_outline
1x Dold 0061165 GF9016 3AC400-600V UH DC24V 11KW soft start device
Datasheet:file_download Download
Lieske Part No.:1002139
Mfg Part No: 0061165
UPC/EAN: 4030641611651
Weight:1 kg
Type:GF9016 3AC400-600V UH DC24V 11KW
Graduated prices net
From piecesPrice per pieces
3591,17 EUR
6563,32 EUR
9535,46 EUR
12507,60 EUR

Product information for Dold 0061165:

The soft starter GF 9016 from Dold is an electronic control device for smooth start-up and shut-down of three-phase asynchronous motors. It reduces mechanical stress in the drive system and enables jerk-free operation, especially for motors with high starting power. The device operates using phase-angle control via power semiconductors (thyristors), whereby the currents in two motor phases increase gradually and torque is built up in a controlled manner. After start-up, the thyristors are bypassed via internal relay contacts to minimize power losses in the device. The soft shut-down function extends the natural coast-down time to avoid abrupt stopping and mechanical stress.

Applications
This device is suitable for drives in industrial applications, particularly for machines with gear, belt, or chain drives, conveyor belts, fans, pumps, compressors, woodworking machines, centrifuges, packaging machines, and door drives. It reduces mechanical stress on drive components and extends the service life of motors and mechanical parts. The application is especially beneficial for systems that would generate high inrush currents if switched on directly.

Functions and Equipment in Detail
The device offers separate adjustment options for start-up and shut-down time, as well as for start-up voltage. Optionally, a kick-start function can be activated to support the start-up process. Control is via terminals X2 (Start/Stop) and X3 (Kickstart 0.5 s). The auxiliary voltage is DC 24 V. The supply/motor voltage range is 3AC 400–600 V, with the load voltage reaching up to 3AC 400 V. The motor rated power is 18.5 kW, although the device is designed for motors up to 22 kW. The width is 45 mm for motors up to 15 kW and 52.5 mm for motors up to 22 kW.

Technology Explained Simply
Control is achieved via phase-angle control, where two motor phases are controlled via thyristors. This allows the current to increase gradually, resulting in a controlled rise in torque. This prevents mechanical shocks during start-up. After start-up, the device is bypassed via an internal relay to minimize power losses. Network monitoring and temperature monitoring ensure safe operation. Indication is provided by a green LED (ready for operation) and a yellow LED, which blinks at a specific frequency to indicate faults. The fault codes are described in the data sheet and include, for example, supply voltage faults, overload, electronic faults, or ignition faults in the phases.

Compatibility and Accessories
The device is designed for 3-phase AC motors and can be operated in W3 configuration. It complies with the standard IEC/EN 60947-4-2. Approvals include the UKCA mark. The connection terminals are clearly labeled: X1 (output +24 V), X2 (Start/Stop), X3 (Kickstart), X4 (0 V), X5/X6 (alarm output, fault), X7/X8 (alarm output, device bypassed). The alarm outputs allow integration into higher-level control systems.

Mounting and Installation
Mounting is done in standard control panels. The width varies depending on motor power (45 mm up to 15 kW, 52.5 mm up to 22 kW). Terminal designations are detailed in the data sheet. Wiring is done according to connection labels L1, L2, L3 (supply voltage) and T1, T2, T3 (motor voltage). The auxiliary voltage (DC 24 V) is connected via X1. The device indicators (LEDs) serve for status monitoring and fault diagnosis.

Operational Advantages
By reducing inrush currents, the supply network is relieved. Mechanical stress on drive components is reduced, resulting in less wear and longer service life. Simple installation and space-saving design facilitate integration into existing systems. Integrated network and temperature monitoring increase operational safety. The alarm outputs allow connection to external control systems or monitoring systems.

Approvals and Markings
The device carries the UKCA mark, confirming compliance with applicable European safety requirements. The approval covers use in industrial applications with 3-phase motors in the voltage range 3AC 400–600 V.

Fault Diagnosis
The yellow LED blinks at a specific frequency during faults, corresponding to a fault code. Fault codes include, for example, supply voltage fault (1 blink), overload (2 blinks), electronic fault (3 blinks), ignition fault in phase 1 (4 blinks), or motor phase fault (6 blinks). Fault resolution follows the instructions in the data sheet, e.g., by checking the supply voltage, motor load, or cooling.

Connection Terminals
The terminals are clearly labeled: L1, L2, L3 (supply voltage), T1, T2, T3 (motor voltage), X1 (output +24 V), X2 (Start/Stop), X3 (Kickstart), X4 (0 V), X5/X6 (alarm output, fault), X7/X8 (alarm output, device bypassed). Terminal labeling enables unambiguous and secure wiring.

Operational Safety
Integrated network and temperature monitoring ensure that the device responds to deviations from operating conditions. Alarm outputs allow connection to external control systems to detect and resolve faults early. Operational safety is ensured by compliance with IEC/EN 60947-4-2 and the UKCA mark.

Application Scenarios
The device is suitable for drives in the packaging industry, woodworking, conveyor belts, fans, pumps, and compressors. It is particularly used where direct start-up would cause high mechanical stress. The application is also beneficial in systems with high start frequencies, as it extends the service life of motors and drive components.

Maintenance and Care
Maintenance is carried out according to the instructions in the data sheet. In case of faults, the fault message should be interpreted via the LED display. Cooling of the device can be improved by forced cooling, e.g., with a fan. The terminals are designed for secure connections, and the width allows easy mounting in standard control panels.

Technical data
Extra functionsMains monitoring, Temperature monitoring
For three-phase motors, 400 V up to22 kW
Load voltage up to3AC 400 V
Width45 mm, 52,5 mm
TypeGF 9016
Signalling outputYes
Variant
Auxiliary voltageDC 24 V
Mains / motor voltage3AC 400 - 600 V
Nominal motor power18,5 kW
Approvals and MarkingsUKCA


Product data sheet
Datasheet for Dold 0061165, EAN: 4030641611651

Questions & answers

What is the delivery time of Dold 0061165 GF9016 3AC400-600V UH DC24V 11KW soft start device?

The article Dold 0061165 GF9016 3AC400-600V UH DC24V 11KW soft start device is currently not in stock but has been backordered.

According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Dold 0061165 to our sales team for an exact delivery time.

How can I buy the item at a lower price?

We offer you Dold 0061165 GF9016 3AC400-600V UH DC24V 11KW soft start device always at the best possible price. We can give you a discount of 2% on Dold 0061165 GF9016 3AC400-600V UH DC24V 11KW soft start device if you choose payment in advance on ordering.

In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 3 pieces of Dold 0061165 GF9016 3AC400-600V UH DC24V 11KW soft start device we can offer you a price of 591,17 EUR per piece. The more you buy, the cheaper the article will be.

We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

 


Searching
Search is performed.
Please be patient ...
Fehlende Felder
Close
Product in the shopcart

The following item has been put into your shopping cart by our system:

1x Dold 0061165 GF9016 3AC400-600V UH DC24V 11KW soft starter
Dold 0061165 GF9016 3AC400-600V UH DC24V 11KW soft start device
619,03 EUR
Sum of all articles in cart
plus VAT
You can continue shopping and open your cart at any time from the top menu bar or now directly by clicking the button.
Enquiry: Dold 0061165 GF9016 3AC400-600V UH DC24V 11KW soft starter
Company name
Name
Homepage
Street
ZIP-Code City
Country
Telephone
Desired quantity
Comment
8 + 7 =
Data protection notice: The data entered here will only be electronically stored and processed for the purpose of responding to your inquiry in accordance with Art. 6 GDPR para. 1b. The basis for this is our privacy policy.
Name and email address are the only mandatory fields.

We use cookies. Some are required to run the shop (e.g. shopping cart and login), others help us improve it (Google Analytics). Statistics cookies are only used with your consent. See our privacy policy for details.