Online retailer for industrial customers, commercial customers and public institutions - no sales to private customers
Switch to german languageIndustry-Electronics in English

Dold 0058565 BF9250.91/002 UH=AC/DC24V DC0-10V semiconductor contactor AC110-240V AC50A

Your rating:
Average rating
product review for Dold 0058565 BF9250.91/002 UH=AC/DC24V DC0-10V semiconductor contactor AC110-240V AC50A
( 5 / 5 ) 1 ratings
Dold 0058565
This image may differ from the desired article.
289,00 EUR
( 343,91 EUR incl. VAT )
≈ £241.89  |  ≈ $317.61
plus delivery charges: 55,00 €
On order · Delivery time approx. 20 workdaysinfo_outline
1x Dold 0058565 BF9250.91/002 UH=AC/DC24V DC0-10V semiconductor contactor AC110-240V AC50A
Datasheet:file_download Download
Lieske Part No.:1001514
Mfg Part No: 0058565
UPC/EAN: 4030641585655
Weight:1.1 kg
Type:BF9250.91/002 UH=AC/DC24V DC0-10V
Graduated prices net
From piecesPrice per pieces
4276,00 EUR
8262,99 EUR
12249,98 EUR
16236,98 EUR

Product information for Dold 0058565:

The Dold semiconductor contactor BF9250.91/002 UH=AC/DC24V DC0-10V is an industrial semiconductor contactor with an analog control input for pulse packet control of heating elements. It is designed for precise temperature control in industrial applications where fast, noiseless, and reliable switching functions are required. The device is intended for use in electrical control systems that require zero-voltage switching to minimize voltage spikes and disturbances. Control is performed via an analog input, which can be operated either via DC 0–10 V or DC 4–20 mA, and also supports a potentiometer input with a resistance range of 0–10 kΩ. The linear distribution of pulses over 64 cycles enables fine control of load power with a resolution of 1.5625 %, ensuring precise regulation of heating power.

Applications include industrial heating systems, such as ovens, drying plants, or temperature control devices, where continuous and precise temperature regulation is required. The device is designed for ohmic loads and is particularly suitable for applications where high switching speed and low mechanical stress are important. The load voltage is AC 110–240 V, and the device is also approved for voltages up to AC 480 V. The load current can reach up to AC 50 A, with the width varying according to rated current: 22.5 mm for 10 A, 45 mm for 25 A, and 90 mm for 50 A. The auxiliary voltage is AC/DC 24 V, supplied via terminals A1/A2.

Functions and equipment in detail include a varistor protection circuit, which protects the device against overvoltages, and a temperature protection for the power semiconductor, which triggers a shutdown in case of overheating. The LED indicators signal the operating status: green LED for auxiliary voltage, yellow LED for output status, and red LED for alarms. In case of a synchronization error, a control input fault, or overheating, the red LED lights up, with the overheating message being stored and requiring a brief interruption of the supply voltage to reset. The device is snap-on to DIN rail, enabling easy installation in enclosures.

Technology explained simply is based on pulse packet control, where the load is switched on in short, regulated pulses to control average power. The zero-voltage switching ensures that the switch only operates at zero voltage in the network, increasing the lifespan of the semiconductors and minimizing electromagnetic interference. The control inputs allow flexible integration into existing control systems, with input signals coming directly from sensors, controllers, or control devices. The overcurrent protection function and reverse polarity protection enhance operational safety.

Compatibility and accessories include use with standard control devices providing analog signals (0–10 V, 4–20 mA) or potentiometer outputs. The terminals are clearly labeled: A1/A2 for auxiliary voltage, X1 for control input, L1/N for mains connections, and T1/N for load output. The certifications according to IEC/EN 60947-4-2 and IEC/EN 60947-4-3, as well as UL listing C/US, confirm compliance with international safety and quality standards. The device is designed for operation in environments with up to 75 % relative humidity (without condensation) and ambient temperatures from 0 to 40 °C. Above 40 °C, the load current is reduced to limit thermal stress.

Mounting and installation is done by snapping onto a DIN rail. Recommended clearances to the surroundings are 20 mm above and below, and 10 mm to the left and right, to ensure sufficient cooling. The terminal clamps are designed for cable connections, with maximum load current and switching duty cycle to be considered. The operating mode is continuous duty, with power consumption determined by the load and control. The power losses amount to approximately 1.2 V multiplied by the load current in amperes.

Advantages in operation include high switching speed, noiseless operation, and long semiconductor lifespan. Precise control enables efficient energy use and stable temperature regulation. Integrated protection functions increase operational safety, and the LED indicators facilitate error diagnosis. The device is designed for use in industrial environments where reliability and ease of maintenance are critical. The certifications according to IEC/EN 60947-4-2 and IEC/EN 60947-4-3, as well as UL listing C/US, confirm compliance with international standards for safety and performance. The temperature monitoring and synchronization monitoring ensure safe operation, even under demanding conditions.

Technical data
Analog Input Control4 - 20 mA
ApprovalsUL
Load current up to50 A
Load voltage up toAC 480 V
Number of poles1-pole
Width22,5 mm, 45 mm, 90 mm
TypeBF 9250/0_2
Temperature monitoringYes
Variant
Auxiliary voltageAC/DC 24 V
Contact equippingwithout signal contact
Control inputDC 0 - 10 V
Load currentAC 50 A
Load voltageAC 110 - 240 V
Semiconductor output1-pole
Approvals and MarkingsUL-listed C/US
VariantOutput control with fixed period of 64 cycles


Product data sheet
Datasheet for Dold 0058565, EAN: 4030641585655

Questions & answers

What is the delivery time of Dold 0058565 BF9250.91/002 UH=AC/DC24V DC0-10V semiconductor contactor AC110-240V AC50A?

The article Dold 0058565 BF9250.91/002 UH=AC/DC24V DC0-10V semiconductor contactor AC110-240V AC50A is currently not in stock but has been backordered.

According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Dold 0058565 to our sales team for an exact delivery time.

How can I buy the item at a lower price?

We offer you Dold 0058565 BF9250.91/002 UH=AC/DC24V DC0-10V semiconductor contactor AC110-240V AC50A always at the best possible price. We can give you a discount of 2% on Dold 0058565 BF9250.91/002 UH=AC/DC24V DC0-10V semiconductor contactor AC110-240V AC50A if you choose payment in advance on ordering.

In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 4 pieces of Dold 0058565 BF9250.91/002 UH=AC/DC24V DC0-10V semiconductor contactor AC110-240V AC50A we can offer you a price of 276,00 EUR per piece. The more you buy, the cheaper the article will be.

We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

 


Searching
Search is performed.
Please be patient ...
Fehlende Felder
Close
Product in the shopcart

The following item has been put into your shopping cart by our system:

1x Dold 0058565 semiconductor contactor AC110-240V AC50A
Dold 0058565 BF9250.91/002 UH=AC/DC24V DC0-10V semiconductor contactor AC110-240V AC50A
289,00 EUR
Sum of all articles in cart
plus VAT
You can continue shopping and open your cart at any time from the top menu bar or now directly by clicking the button.
Enquiry: Dold 0058565 semiconductor contactor AC110-240V AC50A
Company name
Name
Homepage
Street
ZIP-Code City
Country
Telephone
Desired quantity
Comment
3 + 5 =
Data protection notice: The data entered here will only be electronically stored and processed for the purpose of responding to your inquiry in accordance with Art. 6 GDPR para. 1b. The basis for this is our privacy policy.
Name and email address are the only mandatory fields.

We use cookies. Some are required to run the shop (e.g. shopping cart and login), others help us improve it (Google Analytics). Statistics cookies are only used with your consent. See our privacy policy for details.