Online retailer for industrial customers, commercial customers and public institutions - no sales to private customers
Switch to german languageIndustry-Electronics in English

USB Isolator STD 10 LWL

Your rating:
Average rating
product review for USB Isolator STD 10 LWL
( 4.5 / 5 ) 101 ratings
209,22 EUR
( 248,97 EUR incl. VAT )
≈ £174.91  |  ≈ $229.93
plus delivery charges: 55,00 €
On order · Delivery time approx. 20 workdaysinfo_outline
1x USB Isolator STD 10 LWL
Lieske Part No.:745819
Mfg Part No: 2005420
Weight:0.7 kg

Product information for 2005420:

The USB Isolator STD 10 LWL is a device for galvanic isolation of USB connections, developed for use in medical and industrial environments where safe electrical isolation between computer and connected device is required. The device enables transmission of USB signals via a fibre optic connection, thereby avoiding conductive electrical connections and achieving complete galvanic isolation. The signals are converted from USB 1.1 format into light signals, transmitted over a fibre optic cable, and then converted back into USB signals. This principle ensures secure data transmission without electrical contact between the devices.

Applications

The USB Isolator STD 10 LWL is particularly suitable for applications in the medical field, where avoiding electrical conduction between patients and electronic devices is critical. It can also be used in industrial environments where electromagnetic interference or different earth potentials between devices may occur. Galvanic isolation protects sensitive equipment and reduces the risk of interference or damage caused by voltage spikes.

Functions and Equipment in Detail

The device consists of two parts: the primary unit, which connects to the computer and is powered via the USB interface from the PC, and the secondary unit, which is mounted on the connected device and is powered by an included external power supply providing 5 V. The connection between both units is established via a fibre optic cable with a standard length of 10 metres. The USB interface is configured as a Type A plug on the computer and a Type A receptacle on the device, enabling direct connection to USB-compatible devices.

Technology Explained Simply

Galvanic isolation is achieved by converting electrical USB signals into light signals, which are transmitted over a fibre optic cable. These light signals are not electrically conductive and thus prevent any direct electrical connection between the connected devices. The maximum data transfer rate is 12 MBit/s, corresponding to the USB Full Speed standard. The device is compatible with USB 1.1 and also supports USB 2.0 systems, although the data transfer rate is limited to the USB 1.1 level. The secondary unit is powered via an external power supply, designed for operation in Europe and the USA.

Compatibility and Accessories

The USB Isolator STD 10 LWL is designed for devices equipped with a USB interface. Compatibility with USB 2.0 systems is provided, although data transfer is limited to USB 1.1 speed. For specific medical applications, optional power supplies with EN 60601-1 certification are available, enabling use in medical facilities. Certifications CE, EN 61000-3-2, EN 61000-3-3, and EN 55022 confirm compliance with European standards for electromagnetic compatibility and safety.

Installation and Mounting

Installation involves connecting the primary unit to the computer via the USB Type A plug and the secondary unit to the device via the USB Type A receptacle. The two units are connected using the 10-metre-long fibre optic cable. The secondary unit is powered by the included external power supply providing 5 V. Mounting requires no special tools or additional components.

Operational Advantages

Galvanic isolation provides high protection against electrical interference and voltage spikes. The use of fibre optic cables enables secure data transmission over long distances without signal loss. Compatibility with USB 1.1 and USB 2.0 systems expands application possibilities. The integrated power supply for the secondary unit via an external power supply ensures independent operation, not dependent on the connected device. Certifications according to EN 61000-3-2, EN 61000-3-3, and EN 55022 guarantee compliance with applicable standards for electromagnetic compatibility and safety.

General
Data throughput12 Mbit/s
USB standardUSB 1.1
Cable length10 m
Current supply5 V
CertificationCE, EN 61000-3-2, EN 61000-3-3, EN 55022
Connection technologyFiber optic cable
Connection to computerConnector A
Connection to deviceSocket A
Scope of deliverypower adapter (EU/US)


Questions & answers

What is the delivery time of USB Isolator STD 10 LWL?

The article USB Isolator STD 10 LWL is currently not in stock but has been backordered.

According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of 2005420 to our sales team for an exact delivery time.

How can I buy the item at a lower price?

We offer you USB Isolator STD 10 LWL always at the best possible price. We can give you a discount of 2% on USB Isolator STD 10 LWL if you choose payment in advance on ordering.

We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

 


Searching
Search is performed.
Please be patient ...
Fehlende Felder
Close
Product in the shopcart

The following item has been put into your shopping cart by our system:

1x Diverse 2005420 USB Isolator STD 10 LWL
USB Isolator STD 10 LWL
209,22 EUR
Sum of all articles in cart
plus VAT
You can continue shopping and open your cart at any time from the top menu bar or now directly by clicking the button.
Enquiry: Diverse 2005420 USB Isolator STD 10 LWL
Company name
Name
Homepage
Street
ZIP-Code City
Country
Telephone
Desired quantity
Comment
3 + 8 =
Data protection notice: The data entered here will only be electronically stored and processed for the purpose of responding to your inquiry in accordance with Art. 6 GDPR para. 1b. The basis for this is our privacy policy.
Name and email address are the only mandatory fields.

We use cookies. Some are required to run the shop (e.g. shopping cart and login), others help us improve it (Google Analytics). Statistics cookies are only used with your consent. See our privacy policy for details.