| General |
| Data throughput | 12 Mbit/s |
| USB standard | USB 1.1 |
| Cable length | 10 m |
| Current supply | 5 V |
| Certification | CE, EN 61000-3-2, EN 61000-3-3, EN 55022 |
| Connection technology | Fiber optic cable |
| Connection to computer | Connector A |
| Connection to device | Socket A |
| Scope of delivery | power adapter (EU/US) |
The USB Isolator STD 10 LWL is a device for galvanic isolation of USB connections, developed for use in medical and industrial environments where safe electrical isolation between computer and connected device is required. The device enables transmission of USB signals via a fibre optic connection, thereby avoiding conductive electrical connections and achieving complete galvanic isolation. The signals are converted from USB 1.1 format into light signals, transmitted over a fibre optic cable, and then converted back into USB signals. This principle ensures secure data transmission without electrical contact between the devices.
Applications
The USB Isolator STD 10 LWL is particularly suitable for applications in the medical field, where avoiding electrical conduction between patients and electronic devices is critical. It can also be used in industrial environments where electromagnetic interference or different earth potentials between devices may occur. Galvanic isolation protects sensitive equipment and reduces the risk of interference or damage caused by voltage spikes.
Functions and Equipment in Detail
The device consists of two parts: the primary unit, which connects to the computer and is powered via the USB interface from the PC, and the secondary unit, which is mounted on the connected device and is powered by an included external power supply providing 5 V. The connection between both units is established via a fibre optic cable with a standard length of 10 metres. The USB interface is configured as a Type A plug on the computer and a Type A receptacle on the device, enabling direct connection to USB-compatible devices.
Technology Explained Simply
Galvanic isolation is achieved by converting electrical USB signals into light signals, which are transmitted over a fibre optic cable. These light signals are not electrically conductive and thus prevent any direct electrical connection between the connected devices. The maximum data transfer rate is 12 MBit/s, corresponding to the USB Full Speed standard. The device is compatible with USB 1.1 and also supports USB 2.0 systems, although the data transfer rate is limited to the USB 1.1 level. The secondary unit is powered via an external power supply, designed for operation in Europe and the USA.
Compatibility and Accessories
The USB Isolator STD 10 LWL is designed for devices equipped with a USB interface. Compatibility with USB 2.0 systems is provided, although data transfer is limited to USB 1.1 speed. For specific medical applications, optional power supplies with EN 60601-1 certification are available, enabling use in medical facilities. Certifications CE, EN 61000-3-2, EN 61000-3-3, and EN 55022 confirm compliance with European standards for electromagnetic compatibility and safety.
Installation and Mounting
Installation involves connecting the primary unit to the computer via the USB Type A plug and the secondary unit to the device via the USB Type A receptacle. The two units are connected using the 10-metre-long fibre optic cable. The secondary unit is powered by the included external power supply providing 5 V. Mounting requires no special tools or additional components.
Operational Advantages
Galvanic isolation provides high protection against electrical interference and voltage spikes. The use of fibre optic cables enables secure data transmission over long distances without signal loss. Compatibility with USB 1.1 and USB 2.0 systems expands application possibilities. The integrated power supply for the secondary unit via an external power supply ensures independent operation, not dependent on the connected device. Certifications according to EN 61000-3-2, EN 61000-3-3, and EN 55022 guarantee compliance with applicable standards for electromagnetic compatibility and safety.