DIGITUS DN-19 32U-8/8-1 Network enclosure Unique 32 U 1609x800x800 mm grey (freight shipping)
|
1.189,15 EUR |
|||||||||||
|
( 1.415,09 EUR incl. VAT ) ≈ £995.32 | ≈ $1,306.88 plus delivery charges |
|||||||||||
| Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline | |||||||||||
| In Stock: 1 pieces | |||||||||||
| Lieske Part No.: | 547179 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfg Part No: | DN-19 32U-8/8-1 | ||||||||||
| UPC/EAN: | 4016032331162 | ||||||||||
| Weight: | 111.5 kg | ||||||||||
| Type: | DN-19 32U-8/8-1 | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for DIGITUS DN-19 32U-8/8-1:
Applications
This enclosure is designed for use in data centers, server rooms, IT cabling centers, and other environments where structured and secure housing of IT components is required. Due to its robust construction and flexible cable management elements, it is also suitable for use as a server rack, especially when considering the heat generation and weight of installed devices. The front door made of safety glass with a steel frame and swing handle provides secure and transparent accessibility.
Functions and Equipment in Detail
The enclosure features two pairs of crimped, galvanized 483 mm (48,3 cm ( 19 inch )) profile rails, which are infinitely adjustable in depth and marked with opposing readable height units. The maximum load capacity of the profile rails is up to 1200 kg. The rails are connected to additional depth braces inside the enclosure, increasing stability. The base chassis is modular and openable, with removable 48,3 cm ( 19 inch ) blanking plates to allow flexible cable routing. On the front side, vertical cable ducts with cable management aids and a cover are installed, available from an enclosure width of 800 mm.
Technology Explained Simply
Cable management is achieved via generous inlets with brushes on the roof, floor, and rear of the enclosure. These brush strips prevent dust ingress and enable clean cable routing. Rear brush strips above and below the rear door (from 26 U) enhance installation flexibility. The roof is prepared for mounting a fan unit and a removable cover. Ventilation is passive, with the use of perforated steel sheet doors enabling improved passive cooling. The front door is equipped with a half-cylinder lock including key type 333, ensuring secure locking. The door hinge can be optionally changed from left to right, facilitating installation at different locations.
Compatibility and Accessories
The enclosure is compatible with a wide range of accessories that extend its functionality. These include patch panels such as the 1 U 24-port Cat5e unshielded black or the 1 U 8-port Cat6 shielded black. Other options include cover plates, shelf floors in various sizes and loads, castors up to 250 kg, drawers, cable routing panels, roof fan units, and plinths. These elements allow individual adaptation to specific installation requirements.
Mounting and Installation
The enclosure is delivered assembled and ready for immediate use. Due to its disassemblable construction, it can be completely disassembled if needed, facilitating transport and installation in confined spaces. Mounting of doors and side panels is simple and quick. The front and rear profile rails are variably adjustable in depth, allowing flexible adaptation to different devices.
Advantages in Operation
The combination of high load capacity, flexible cable management, and modular design offers a high degree of flexibility and adaptability. The powder-coated surface ensures high corrosion resistance. Integrated brush strips and cable ducts reduce the risk of cable damage and simplify maintenance. Lockable doors and side panels increase the security of installed devices. The preparation for fan units allows future expansion of cooling if thermal load increases.
Protection Rating and Operating Conditions
The enclosure is designed for indoor use and complies with protection rating IP20, providing protection against foreign objects larger than 12.5 mm, but no water tightness. The passively ventilated construction is suitable for applications where active cooling is not required. The use of perforated doors can improve passive cooling, especially with higher heat generation from installed components.
| General | |
| Number of rack units | 32 HE |
| Modular spacing | 482,6 mm |
| Degree of protection | IP20 |
| Colour | Grey |
| RAL-number | 7035 |
| Material | Steel |
| Surface coating | Powder coating |
| Front door | Safety glass with steel frame |
| Rear door | Steel |
| Side walls | Lockable |
| Hinge position | selectable left/right |
| DIN rail | crimped, galvanised |
| Load capacity of profile rails | 1200 kg |
| Cable channels | vertical on front side |
| Cable entry | roof, floor, rear with brushes |
| Roof preparation | for fan unit and removable cover |
| Floor chassis | modular, openable, with blank plates |
| Ventilation | Passive |
| Delivery condition | Mounted |
| Disassemblability | |
Questions & answers
What is the delivery time of DIGITUS DN-19 32U-8/8-1 Network enclosure Unique 32 U 1609x800x800 mm grey (freight shipping)?
The article DIGITUS DN-19 32U-8/8-1 Network enclosure Unique 32 U 1609x800x800 mm grey (freight shipping) is currently in stock
According to our experience the article is ready for dispatch within 9 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of DIGITUS DN-19 32U-8/8-1 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you DIGITUS DN-19 32U-8/8-1 Network enclosure Unique 32 U 1609x800x800 mm grey (freight shipping) always at the best possible price. We can give you a discount of 2% on DIGITUS DN-19 32U-8/8-1 Network enclosure Unique 32 U 1609x800x800 mm grey (freight shipping) if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 2 pieces of DIGITUS DN-19 32U-8/8-1 Network enclosure Unique 32 U 1609x800x800 mm grey (freight shipping) we can offer you a price of 1.126,72 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.
Fitting accessory for DIGITUS DN-19 32U-8/8-1 Network enclosure Unique 32 U 1609x800x800 mm grey (freight shipping)
|
DIGITUS DN-19 BPN-01 Blind cover 1 U grey
The DIGITUS 1 U blanking plate DN-19 BPN-01 is a modular accessory for network and server racks in 19-inch format. It is designed to cover unused height units and supports airflow circulation within ... Lieske Part No.: 122512 Mfg Part No: DN-19 BPN-01 |
-9% 5,61 EUR 6,14 EUR
![]() ≈ £4.70 | ≈ $6.17
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
|
DIGITUS DN-19 TRAY-2-600 Rack shelf 1 U 30x483x385 mm up to 25 kg grey pull-out
The DIGITUS DN-19 TRAY-2-600 is an extendable shelf tray for 19-inch network enclosures with a depth of 600 mm. It serves as a stable mounting surface for IT and network devices within enclosure ... Lieske Part No.: 136851 Mfg Part No: DN-19 TRAY-2-600 |
57,97 EUR
![]() ≈ £48.52 | ≈ $63.71
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
|
DIGITUS DN-19 CASTOR Castors for network enclosures 4 pcs up to 250 kg
The DIGITUS DN-19 CASTOR is a castor set for freestanding network and server enclosures in the 482.6 mm (48,3 cm ( 19 inch )) format. It enables mobile positioning and relocation of enclosures from ... Lieske Part No.: 156063 Mfg Part No: DN-19 CASTOR |
61,44 EUR
![]() ≈ £51.43 | ≈ $67.52
Delivery time from supplier's stock (ca.) 7 workdaysinfo_outline
|
|
DIGITUS DN-91524U Patch panel 1 U 24-port Cat5e unshielded black
The DIGITUS Patch Panel DN-91524U is an unshielded CAT 5e network panel with 24 connections, designed for mounting in 19-inch racks. It serves structured cabling in network infrastructures and enables ... Lieske Part No.: 156296 Mfg Part No: DN-91524U Type: ACCS |
23,87 EUR
![]() ≈ £19.98 | ≈ $26.23
Delivery time from supplier's stock (ca.) 12 workdaysinfo_outline
|
|
DIGITUS DN-19 KEY-3U Drawer 3 U 483 mm grey lockable
The DIGITUS DN-19 KEY-3U is a 3U lockable drawer made of robust sheet steel with powder coating in the colour Grey (RAL 7035). It is specifically designed for use in 19-inch network and server racks ... Lieske Part No.: 173300 Mfg Part No: DN-19 KEY-3U |
111,17 EUR
![]() ≈ £93.05 | ≈ $122.18
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
|
DIGITUS DN-19 ORG-1 Cable management bracket 1 U for 483 mm 44x60 mm grey 10 pcs
The DIGITUS DN-19 ORG-1 is a Rack cable routing ring made of sheet steel, specifically designed for structured cabling in 48,3 cm ( 19 inch ) network and server racks with a width of 48.3 cm. The ... Lieske Part No.: 312818 Mfg Part No: DN-19 ORG-1 |
25,95 EUR
![]() ≈ £21.72 | ≈ $28.52
Delivery time from supplier's stock (ca.) 6 workdaysinfo_outline
|
|
DIGITUS DN-91648U Patch panel 2 U 48-port Cat6 unshielded black
The DIGITUS Patch Panel DN-91648U is a 48-port network connection panel of Category 6, designed for use in professional IT and telecommunications installations. It enables structured cabling in ... Lieske Part No.: 321561 Mfg Part No: DN-91648U Type: ACCS |
55,00 EUR
![]() ≈ £46.04 | ≈ $60.45
Delivery time from supplier's stock (ca.) 6 workdaysinfo_outline
|
|
DIGITUS DN-97614 Rack shelf 1 U 44x482x399 mm up to 15 kg grey
The DIGITUS shelf DN-97614 is a 1 U element for fixed installation in 483 mm (48,3 cm ( 19 inch )) network or server racks. It serves as a stable mounting surface for components that cannot be mounted ... Lieske Part No.: 365477 Mfg Part No: DN-97614 |
34,50 EUR
![]() ≈ £28.88 | ≈ $37.92
Delivery time from supplier's stock (ca.) 7 workdaysinfo_outline
|
|
DIGITUS DN-91350-1 Patch panel 1 U 50-port Cat3 unshielded ISDN
The DIGITUS DN-91350-1 is a Patch Panel for use in network infrastructures, specifically designed for mounting in 48,3 cm ( 19 inch )-racks. It features 50 unshielded connections and is intended for ... Lieske Part No.: 367439 Mfg Part No: DN-91350-1 |
66,01 EUR
![]() ≈ £55.25 | ≈ $72.54
Delivery time from supplier's stock (ca.) 8 workdaysinfo_outline
|
|
DIGITUS DN-19 FEET Replacement feet for network enclosures 4 pcs
The product DN-19 FEET from DIGITUS is a set of four height-adjustable levelling feet, specifically designed for mounting under 482.6 mm (48,3 cm ( 19 inch )) network and server racks. These stand ... Lieske Part No.: 403802 Mfg Part No: DN-19 FEET |
12,89 EUR
![]() ≈ £10.79 | ≈ $14.17
Delivery time from supplier's stock (ca.) 7 workdaysinfo_outline
|
|
DIGITUS DN-19 PLINTH-8/8-1 plinth 100x800x800 mm Unique/Dynamic grey
The DIGITUS Professional plinth DN-19 PLINTH-8/8-1 is an accessory for 19-inch network enclosures of the Unique and Dynamic Basic series. It increases the floor clearance by 100 mm and enables the ... Lieske Part No.: 417560 Mfg Part No: DN-19 PLINTH-8/8-1 |
136,18 EUR
![]() ≈ £113.98 | ≈ $149.66
Delivery time from supplier's stock (ca.) 5 workdaysinfo_outline
|
|
DIGITUS DN-19 FAN-2-N Roof fan unit for network enclosures 2 fans grey
The DIGITUS roof fan unit DN-19 FAN-2-N is an accessory module for 19-inch network enclosures, specifically designed for the Unique, Unique Light, Unique Server-N, and Dynamic Basic series. The device ... Lieske Part No.: 437444 Mfg Part No: DN-19 FAN-2-N |
179,34 EUR
![]() ≈ £150.11 | ≈ $197.09
Delivery time from supplier's stock (ca.) 6 workdaysinfo_outline
|
|
DIGITUS DN-19 TRAY-2-1000 Shelf 1 U 30x483x720 mm up to 65 kg grey pull-out
The DIGITUS DN-19 TRAY-2-1000 is a 1 U pull-out tray for 19-inch network and server racks with a depth of 1000 mm. It serves as a stable mounting surface for IT components, such as network switches, ... Lieske Part No.: 454013 Mfg Part No: DN-19 TRAY-2-1000 |
197,38 EUR
![]() ≈ £165.21 | ≈ $216.92
Delivery time from supplier's stock (ca.) 7 workdaysinfo_outline
|
|
DIGITUS DN-97609 Rack shelf 1 U 45x483x250 mm up to 15 kg grey
The DIGITUS rack shelf DN-97609 is a 19-inch rack element in 1U format, specifically designed for use in network and server enclosures. It serves as a ventilated mounting base for devices intended to ... Lieske Part No.: 479639 Mfg Part No: DN-97609 Type: RACK |
15,45 EUR
![]() ≈ £12.93 | ≈ $16.98
Delivery time from supplier's stock (ca.) 7 workdaysinfo_outline
|
|
DIGITUS DN-91524S Patch panel 1 U 24-port Cat5e shielded grey
The DIGITUS DN-91524S is a shielded CAT 5e patch panel with 24 ports, designed for professional network infrastructure in server rooms and IT enclosure installations. It serves as a central connection ... Lieske Part No.: 518583 Mfg Part No: DN-91524S |
47,41 EUR
![]() ≈ £39.68 | ≈ $52.10
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
|
DIGITUS DN-91608SD Patch panel 1 U 8-port Cat6 shielded black
The DIGITUS DN-91608SD is a Desktop Patch Panel with 8 connections, designed for use in SoHo environments (Smart Office, Home Office). It serves as a central connection unit for network cables and ... Lieske Part No.: 566052 Mfg Part No: DN-91608SD |
25,01 EUR
![]() ≈ £20.93 | ≈ $27.49
Delivery time from supplier's stock (ca.) 8 workdaysinfo_outline
|
|
DIGITUS DN-97601 Rack panel 1 U 5x rings 40x60 mm grey
The DIGITUS cable routing panel DN-97601 is a 1 U high routing panel for enclosures in standard format with a width of 48.3 cm (19 inch). It is designed for orderly routing and securing of cables in ... Lieske Part No.: 568291 Mfg Part No: DN-97601 Type: RACK |
9,24 EUR
![]() ≈ £7.73 | ≈ $10.15
Delivery time from supplier's stock (ca.) 7 workdaysinfo_outline
|
|
DIGITUS DN-91325-1 Patch panel 1 U 25-port Cat3 unshielded ISDN grey
The DIGITUS DN-91325-1 is a Patch Panel for ISDN applications, designed as a 25-Port module with RJ45 connectors in 8P4C format. It serves for structured connection of ISDN end devices and lines in ... Lieske Part No.: 591820 Mfg Part No: DN-91325-1 |
47,37 EUR
![]() ≈ £39.65 | ≈ $52.06
Delivery time from supplier's stock (ca.) 8 workdaysinfo_outline
|
|
DIGITUS DN-91624S-SL-SH Patch panel 0.5 U 24-port Cat6 shielded black
The DIGITUS Patch Panel DN-91624S-SL-SH is a 24-port network connection component of category CAT 6, designed for use in 19-inch racks. With a height of only 0.5 U, it enables high packing density, ... Lieske Part No.: 599842 Mfg Part No: DN-91624S-SL-SH |
94,80 EUR
![]() ≈ £79.35 | ≈ $104.19
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
|
DIGITUS DN-97616 Rear panel 1 U removable rear panel grey
The DIGITUS cable management panel DN-97616 is a 1 U cable management cage, specifically designed for use in 483 mm (19 inch) network or server enclosures. It serves for structured routing and ... Lieske Part No.: 610754 Mfg Part No: DN-97616 |
20,80 EUR
![]() ≈ £17.41 | ≈ $22.86
Delivery time from supplier's stock (ca.) 6 workdaysinfo_outline
|
|
DIGITUS DN-91624S-EA Patch panel 1 U 24-port Cat6a shielded light grey
The DIGITUS DN-91624S-EA is a 24-port patch panel of category CAT 6a, class EA, specifically designed for use in 19-inch racks. It serves structured cabling in networks and enables the connection of ... Lieske Part No.: 646839 Mfg Part No: DN-91624S-EA |
112,95 EUR
![]() ≈ £94.54 | ≈ $124.13
Delivery time from supplier's stock (ca.) 6 workdaysinfo_outline
|
|
DIGITUS DN-19 ORG-2U Cable routing panel 2 U 5x rings 85x60 mm Grey
The DIGITUS 2 U cable routing panel DN-19 ORG-2U is an accessory for 483 mm (19 inch) network or server enclosures, specifically designed for organizing and guiding patch cables. It enables structured ... Lieske Part No.: 674053 Mfg Part No: DN-19 ORG-2U |
30,25 EUR
![]() ≈ £25.32 | ≈ $33.24
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
|
DIGITUS DN-19 FAN-2-HO Insert fan unit 2 fans gray
The DIGITUS fan unit DN-19 FAN-2-HO is an accessory module for 483 mm (48,3 cm ( 19 inch )) network and server racks, designed for active dissipation of waste heat from IT components. Designed as a ... Lieske Part No.: 690454 Mfg Part No: DN-19 FAN-2-HO |
196,87 EUR
![]() ≈ £164.78 | ≈ $216.36
On order · Expected to be available from 05.12.2026info_outline
|
|
DIGITUS DN-19 EARTH equipotential bonding rail for enclosures 4 earthing cables
The DIGITUS equipotential bonding bar DN-19 EARTH is a busbar made of copper, specifically designed for use in 19-inch network enclosures. It ensures safe earthing of components installed in the ... Lieske Part No.: 691330 Mfg Part No: DN-19 EARTH |
49,25 EUR
![]() ≈ £41.22 | ≈ $54.13
Delivery time from supplier's stock (ca.) 5 workdaysinfo_outline
|
|
DIGITUS DN-19 TRAY-1-1000 Rack shelf 1 U 44x483x737 mm up to 100 kg grey
The DIGITUS shelf DN-19 TRAY-1-1000 is a 1 U module for fixed installation in 483 mm (48,3 cm ( 19 inch )) network or server racks with a minimum depth of 1000 mm. It serves as a stable mounting ... Lieske Part No.: 754181 Mfg Part No: DN-19 TRAY-1-1000 |
41,66 EUR
![]() ≈ £34.87 | ≈ $45.78
Delivery time from supplier's stock (ca.) 7 workdaysinfo_outline
|
|
DIGITUS DN-19 TRAY-2-55 Rack shelf 2 U 88x482x549 mm up to 25 kg grey
The DIGITUS DN-19 TRAY-2-55 is a 2 U rack shelf for fixed installation in 48,3 cm ( 19 inch )-network or server racks. It serves as a stable mounting surface for components that do not fit the ... Lieske Part No.: 782754 Mfg Part No: DN-19 TRAY-2-55 |
52,52 EUR
![]() ≈ £43.96 | ≈ $57.72
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
|
DIGITUS DN-19 BPN-04-SW Cover plate 4 U blind cover 483 mm black
The DIGITUS DN-19 BPN-04-SW is a 4HE blanking plate in black (RAL 9005), specifically designed for use in 19-inch network and server racks. It is used to cover unused height units in the 482.6 mm ... Lieske Part No.: 791375 Mfg Part No: DN-19 BPN-04-SW |
17,46 EUR
![]() ≈ £14.61 | ≈ $19.19
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
|
DIGITUS DN-95407 power strip 7-way Schutzkontakt Alu 2m supply cable
The DIGITUS power strip DN-95407 is a 1HE aluminium PDU (Power Distribution Unit) for mounting in 19 inch network or server enclosures. It serves as a central power distribution unit for IT and ... Lieske Part No.: 823806 Mfg Part No: DN-95407 |
52,15 EUR
![]() ≈ £43.65 | ≈ $57.31
Delivery time from supplier's stock (ca.) 5 workdaysinfo_outline
|
|
DIGITUS DN-19 KEY-2U drawer 2 U 483 mm gray lockable
The DIGITUS DN-19 KEY-2U is a 2 U lockable drawer made of robust sheet steel with powder coating in the colour Grey (RAL 7035). It is specifically designed for use in 19-inch network and server racks ... Lieske Part No.: 830721 Mfg Part No: DN-19 KEY-2U |
108,80 EUR
![]() ≈ £91.07 | ≈ $119.57
Delivery time from supplier's stock (ca.) 9 workdaysinfo_outline
|
|
DIGITUS DN-19 BPN-02-SW Cover plate 2 U blind cover 483 mm black
The DIGITUS 2 U blanking plate DN-19 BPN-02-SW is a modular accessory for 19-inch network and server racks. It is designed to cover unused rack units in the 482.6 mm (48,3 cm ( 19 inch )) profile and ... Lieske Part No.: 844815 Mfg Part No: DN-19 BPN-02-SW |
10,28 EUR
![]() ≈ £8.60 | ≈ $11.30
Delivery time from supplier's stock (ca.) 7 workdaysinfo_outline
|

































