Further information for DIGITUS DN-19 32U-8/8-1 Network Cabinet 32HE gray
General
Number of rack units
32 HE
Modular spacing
482,6 mm
Degree of protection
IP20
Colour
Grey
RAL-number
7035
Material
Steel
Surface coating
Powder coating
Front door
Safety glass with steel frame
Rear door
Steel
Side walls
Lockable
Hinge position
selectable left/right
DIN rail
crimped, galvanised
Load capacity of profile rails
1200 kg
Cable channels
vertical on front side
Cable entry
roof, floor, rear with brushes
Roof preparation
for fan unit and removable cover
Floor chassis
modular, openable, with blank plates
Ventilation
Passive
Delivery condition
Mounted
Disassemblability
The DIGITUS network enclosure DN-19 32U-8/8-1 from the Unique Series is a 32 U floor-standing enclosure with dimensions 1609x800x800 mm, designed for use in IT infrastructures. It is intended for housing and organizing network and server components indoors. The construction from steel sheet up to 1.5 mm thick ensures high mechanical stability. The surface is electrostatically powder-coated in Grey (RAL 7035), providing an even and durable coating.
Applications
This enclosure is designed for use in data centers, server rooms, IT cabling centers, and other environments where structured and secure housing of IT components is required. Due to its robust construction and flexible cable management elements, it is also suitable for use as a server rack, especially when considering the heat generation and weight of installed devices. The front door made of safety glass with a steel frame and swing handle provides secure and transparent accessibility.
Functions and Equipment in Detail
The enclosure features two pairs of crimped, galvanized 483 mm (48,3 cm ( 19 inch )) profile rails, which are infinitely adjustable in depth and marked with opposing readable height units. The maximum load capacity of the profile rails is up to 1200 kg. The rails are connected to additional depth braces inside the enclosure, increasing stability. The base chassis is modular and openable, with removable 48,3 cm ( 19 inch ) blanking plates to allow flexible cable routing. On the front side, vertical cable ducts with cable management aids and a cover are installed, available from an enclosure width of 800 mm.
Technology Explained Simply
Cable management is achieved via generous inlets with brushes on the roof, floor, and rear of the enclosure. These brush strips prevent dust ingress and enable clean cable routing. Rear brush strips above and below the rear door (from 26 U) enhance installation flexibility. The roof is prepared for mounting a fan unit and a removable cover. Ventilation is passive, with the use of perforated steel sheet doors enabling improved passive cooling. The front door is equipped with a half-cylinder lock including key type 333, ensuring secure locking. The door hinge can be optionally changed from left to right, facilitating installation at different locations.
Compatibility and Accessories
The enclosure is compatible with a wide range of accessories that extend its functionality. These include patch panels such as the 1 U 24-port Cat5e unshielded black or the 1 U 8-port Cat6 shielded black. Other options include cover plates, shelf floors in various sizes and loads, castors up to 250 kg, drawers, cable routing panels, roof fan units, and plinths. These elements allow individual adaptation to specific installation requirements.
Mounting and Installation
The enclosure is delivered assembled and ready for immediate use. Due to its disassemblable construction, it can be completely disassembled if needed, facilitating transport and installation in confined spaces. Mounting of doors and side panels is simple and quick. The front and rear profile rails are variably adjustable in depth, allowing flexible adaptation to different devices.
Advantages in Operation
The combination of high load capacity, flexible cable management, and modular design offers a high degree of flexibility and adaptability. The powder-coated surface ensures high corrosion resistance. Integrated brush strips and cable ducts reduce the risk of cable damage and simplify maintenance. Lockable doors and side panels increase the security of installed devices. The preparation for fan units allows future expansion of cooling if thermal load increases.
Protection Rating and Operating Conditions
The enclosure is designed for indoor use and complies with protection rating IP20, providing protection against foreign objects larger than 12.5 mm, but no water tightness. The passively ventilated construction is suitable for applications where active cooling is not required. The use of perforated doors can improve passive cooling, especially with higher heat generation from installed components.