Online retailer for industrial customers, commercial customers and public institutions - no sales to private customers
Switch to german languageIndustry-Electronics in English

DEHN 952315 DGMTT275FM surge arrester Type 2 guard M 4-pole for TT- and TN-S

Your rating:
Average rating
product review for DEHN 952315 DGMTT275FM surge arrester Type 2 guard M 4-pole for TT- and TN-S
( 4 / 5 ) 1 ratings
DEHN 952315
This image may differ from the desired article.
DEHN 952315DEHN 952315
459,23 EUR 464,61 EUR
( 546,48 EUR incl. VAT )
≈ £384.38  |  ≈ $504.69
plus delivery charges: 55,00 €
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
In Stock: >10 pieces
1x DEHN 952315 DGMTT275FM surge arrester Type 2 guard M 4-pole for TT- and TN-S
Datasheet:file_download Download
Lieske Part No.:700454
Mfg Part No: 952315
UPC/EAN: 4013364108486
Weight:0.441 kg
Type:DG M TT 275 FM
Graduated prices net
From piecesPrice per pieces
4393,79 EUR
8328,35 EUR
12262,91 EUR
16197,47 EUR

Product information for DEHN 952315:

The DEHNguard M TT 275 FM is a multipole surge arrester of Type 2 category, designed for the protection of low-voltage consumer installations against transient overvoltages. The manufacturer is DEHN, and the device carries the manufacturer's number 952315. It is specifically designed for use in the lightning protection zone concept, particularly at interfaces 0B – 1 and higher, where it functions as the second protection stage to safeguard sensitive electrical equipment from damage caused by induced voltages or direct lightning strikes.

Applications

The arrester is intended for use in electrical installations with TT- and TN-S systems. It protects consumer installations in buildings that have earthing, and is particularly suitable for residential and commercial buildings where electrical devices such as heating systems, lighting, household appliances, or IT systems are connected. The application typically takes place in the distribution box, where it is installed between the supply line and the consumer system.

Functions and Equipment in Detail

The DEHNguard M TT 275 FM consists of a base unit and several plug-in protection modules, each covering one pole. The construction allows for modular expansion and maintenance. A central feature is the arrester monitoring with Thermo-Dynamic-Control, which continuously monitors the condition of the arrester. In case of a malfunction, for example due to thermal overload or wear, the arrester is automatically deactivated to prevent hazards from faulty discharge. This increases the safety of the entire installation.

Technology Explained Simply

The arrester operates on the principle of overvoltage limitation. When a voltage spike exceeds the permissible operating voltage range, it switches within nanoseconds and safely diverts the excess energy. The protection function is achieved through nonlinear resistors, which are highly resistive under normal voltage conditions but suddenly become low resistive under overvoltage conditions. The Thermo-Dynamic-Control monitors the temperature and electrical condition of the protection modules to enable early detection of defects.

Compatibility and Accessories

The device is designed for TT- and TN-S systems, which cover most modern electrical installations in Germany and Europe. As suitable accessories, the DEHNguard MD TT 275 FM (article number 943315) is offered, which serves as an additional type of protection module for similar applications. Combination with other DEHN protection modules is possible, provided the system requirements and protection levels match.

Mounting and Installation

Installation takes place in a distribution box, where the arrester is connected to the supply line. Mounting is done by plugging the protection modules into the base unit, which is screwed into the distribution box. The electrical connection is made via the designated terminal clamps. Installation must comply with applicable VDE and EN standards, ensuring correct earthing and maintaining minimum distances from other components.

Advantages in Operation

The integrated monitoring function with Thermo-Dynamic-Control increases the reliability of protection. The user receives a clear indication when the arrester is no longer functional, simplifying maintenance and inspection. The modular design allows flexible adaptation to different installation configurations. Compliance with standard EN 61643-11 ensures conformity with European requirements for surge protection devices.

General
Degree of protectionType 2
NormEN 61643-11
Monitoring technologyThermo-Dynamik-Control
Number of poles4-pole
Use in lightning protection zone conceptinterfaces 0B – 1 and higher
Arrester use at 16.7 Hz – traction power supply systems
Test voltage AC (UC)275 V
Nominal AC voltage (UN)230 / 400 V
Nominal frequency AC (fN)16.7 Hz
Standards
CertificationUL
UL StandardUL 1449 5th edition
UL File NumberE319777
Technical data
Energy coordination with terminal equipment (≤ 10 m)type 2 + type 3
Nominal voltage (a.c.) (UN)230 / 400 V (50 / 60 Hz)
Max. continuous operating voltage (a.c.) [L-N] (UC)275 V (50 / 60 Hz)
Max. continuous operating voltage (a.c.) [N-PE] (UC)255 V (50 / 60 Hz)
Nominal discharge current (8/20 µs) (In)20 kA
Max. discharge current (8/20 µs) (Imax)40 kA
Combination wave [L-N] (UOC)20 kV
Combination wave [N-PE] (UOC)6 kV
Voltage protection level [L-N]/[N-PE] (UP)≤ 1.5 / ≤ 1.5 kV
Voltage protection level [L-N]/[N-PE] at 5 kA (UP)≤ 1 / ≤ 1.5 kV
Protective conductor current (IPE)≤ 10 µA
Response time [L-N] (tA)≤ 25 ns
Response time [N-PE] (tA)≤ 100 ns
Max. mains-side overcurrent protection125 A gG
Short-circuit withstand capability for max. mains-side overcurrent protection (ISCCR)50 kArms
Temporary overvoltage (TOV) [L-N] (UT) – Characteristic335 V / 5 sec. – Festigkeit, 440 V / 120 min. – sicherer Ausfall
Temporary overvoltage (TOV) [N-PE] (UT) - Characteristic1200 V / 200 ms – withstand
Operating temperature range (TU)-40 °C ... +80 °C
Operating state / fault indicationgreen / red
Number of ports1
Cross-sectional area (min.)1.5 mm2 solid / flexible
Cross-sectional area (max.)35 mm2 stranded / 25 mm2 flexible
For mounting on35 mm DIN rails acc. to EN 60715
Enclosure materialthermoplastic, red, UL 94 V-0
Place of installationindoor installation
Degree of protectionIP 20 (integrated)
Capacity4 Standard DIN module, DIN 43880
ApprovalsDEKRA, VDE, UL
Type of remote signalling contactchangeover contact
Switching capacity (a.c.)250 V / 0.5 A
Switching capacity (d.c.)250 V / 0.1 A; 125 V / 0.2 A; 75 V / 0.5 A
Cross-sectional area for remote signalling terminalsmax. 1.5 mm2 solid / flexible
Test values according to UL 1449
Rated Voltage (AC, 50/60 Hz)230 V
MCOV (AC, 50/60 Hz) [L-N]/[L-G]/[N-G]275 V
Voltage protection rating (VPR)≤ 1500 / ≤ 1500 V
Nominal discharge current (8/20µs) ( In)20 kA
Maximum ambient temperature85 °C
UL 1449 edition5th edition
Type (SPD classification)Type 4 component assembly


Product data sheet
Datasheet for DEHN 952315, EAN: 4013364108486

Questions & answers

What is the delivery time of DEHN 952315 DGMTT275FM surge arrester Type 2 guard M 4-pole for TT- and TN-S?

The article DEHN 952315 DGMTT275FM surge arrester Type 2 guard M 4-pole for TT- and TN-S is currently in stock

According to our experience the article is ready for dispatch within 2 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of DEHN 952315 to our sales team for an exact delivery time.

How can I buy the item at a lower price?

We offer you DEHN 952315 DGMTT275FM surge arrester Type 2 guard M 4-pole for TT- and TN-S always at the best possible price. We can give you a discount of 2% on DEHN 952315 DGMTT275FM surge arrester Type 2 guard M 4-pole for TT- and TN-S if you choose payment in advance on ordering.

In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 4 pieces of DEHN 952315 DGMTT275FM surge arrester Type 2 guard M 4-pole for TT- and TN-S we can offer you a price of 393,79 EUR per piece. The more you buy, the cheaper the article will be.

We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

 


This product is recommended as accessory for

DEHN 943315 DG MD TT 275 FM surge protector type 2 guard MD DEHN 943315 DG MD TT 275 FM surge protector type 2 guard MD Mehrpoliger Überspannungsableiter DEHNguard MD, Typ 2 nach EN 61643-11, bestehend aus Basisteil und gesteckten Schutzmodulen. Hohe Gerätesicherheit durch Ableiterüberwachung mit ...

Lieske Part No.: 889516
Mfg Part No: 943315
Type: DG MD TT 275 FM
425,22 EUR 430,25 EUR
DEHN 943315 plus VAT
≈ £355.91  |  ≈ $467.32
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline

Fitting accessory for DEHN 952315 DGMTT275FM surge arrester Type 2 guard M 4-pole for TT- and TN-S

DEHN 943315 DG MD TT 275 FM surge protector type 2 guard MD DEHN 943315 DG MD TT 275 FM surge protector type 2 guard MD Mehrpoliger Überspannungsableiter DEHNguard MD, Typ 2 nach EN 61643-11, bestehend aus Basisteil und gesteckten Schutzmodulen. Hohe Gerätesicherheit durch Ableiterüberwachung mit ...

Lieske Part No.: 889516
Mfg Part No: 943315
Type: DG MD TT 275 FM
425,22 EUR 430,25 EUR
DEHN 943315 plus VAT
≈ £355.91  |  ≈ $467.32
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
Searching
Search is performed.
Please be patient ...
Fehlende Felder
Close
Product in the shopcart

The following item has been put into your shopping cart by our system:

1x Dehn 952315 Surge Arrester 4-pole TT
DEHN 952315 DGMTT275FM surge arrester Type 2 guard M 4-pole for TT- and TN-S
459,23 EUR
Sum of all articles in cart
plus VAT
You can continue shopping and open your cart at any time from the top menu bar or now directly by clicking the button.
Enquiry: Dehn 952315 Surge Arrester 4-pole TT
Company name
Name
Homepage
Street
ZIP-Code City
Country
Telephone
Desired quantity
Comment
2 + 4 =
Data protection notice: The data entered here will only be electronically stored and processed for the purpose of responding to your inquiry in accordance with Art. 6 GDPR para. 1b. The basis for this is our privacy policy.
Name and email address are the only mandatory fields.

We use cookies. Some are required to run the shop (e.g. shopping cart and login), others help us improve it (Google Analytics). Statistics cookies are only used with your consent. See our privacy policy for details.