Online retailer for industrial customers, commercial customers and public institutions - no sales to private customers
Switch to german languageIndustry-Electronics in English

DEHN 952305 DGMTNC275FM surge arrester type 2 guard M 3-pole for TN-C

Your rating:
Average rating
product review for DEHN 952305 DGMTNC275FM surge arrester type 2 guard M 3-pole for TN-C
( 4.4 / 5 ) 11 ratings
DEHN 952305
This image may differ from the desired article.
DEHN 952305DEHN 952305
338,58 EUR 342,54 EUR
( 402,91 EUR incl. VAT )
≈ £283.39  |  ≈ $372.10
plus delivery charges: 55,00 €
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
In Stock: >10 pieces
1x DEHN 952305 DGMTNC275FM surge arrester type 2 guard M 3-pole for TN-C
Datasheet:file_download Download
Lieske Part No.:481558
Mfg Part No: 952305
UPC/EAN: 4013364108448
Weight:0.349 kg
Type:DG M TNC 275 FM
Graduated prices net
From piecesPrice per pieces
4292,87 EUR
8247,16 EUR
12201,46 EUR
16155,75 EUR

Product information for DEHN 952305:

The DEHN surge arrester type DG M TNC 275 FM is a multipole, modular surge arrester from the DEHNguard modular product family, specifically designed for use in TN-C systems. It protects low-voltage consumer installations against transient overvoltages caused by lightning strikes or network disturbances. The device is classified as Type 2 + Type 3 according to IEC 61643-11 / EN IEC 61643-11 and is suitable for use in the lightning protection zone concept at interfaces 0B - 1 and higher. The energy-coordinated protection effect within the Red/Line family ensures optimal coordination with downstream devices over a distance of up to 10 meters.

Applications

The arrester is intended for indoor use and is mounted on a 35 mm DIN rail in accordance with EN 60715. It is designed for low-voltage installations with a nominal voltage of 230/400 V (50/60 Hz) and has a maximum continuous voltage of 275 V AC. The overvoltage category (OVC) for the main circuit is III, allowing application near consumers or at the distribution level. The auxiliary circuit is equipped with OVC II, ensuring safe use of remote signaling contacts.

Functions and Equipment in Detail

The device consists of a base unit and plug-in protection modules that can be replaced without tools. Surge arrester monitoring is performed via the Thermo-Dynamic-Control system, which continuously monitors the arrester's condition. A green LED indicates proper functionality, while a red LED signals a fault. At the end of the arrester's service life, an open circuit (OCM) is achieved to ensure safe disconnection.

Technology Explained Simply

The arrester features high surge current handling capacity thanks to powerful zinc oxide varistors and spark gaps. The nominal surge current is 20 kA (8/20 µs), with a maximum surge current of 40 kA. The protection level is ≤ 1.5 kV; at a test current of 5 kA, it is ≤ 1 kV. The response time is ≤ 25 ns, enabling rapid reaction to overvoltages. The TOV voltage (UT) is specified as 335 V/5 sec. (withstand) and 440 V/120 min. (safe failure). The short-circuit withstand capability is 50 kAeff with a maximum network-side overcurrent protection of 125 A gG.

Compatibility and Accessories

The arrester is designed for use in TN-C systems and includes a potential-free remote signaling contact in changeover configuration. The switching capacity is 250 V / 0.5 A (AC) and 250 V / 0.1 A (DC), 125 V / 0.2 A (DC), 75 V / 0.5 A (DC). The connection cross-sections for main conductors range from 1.5 mm² (min.) to 35 mm² (max. stranded) or 25 mm² (max. fine-stranded). For FM terminals, the maximum connection cross-section is 1.5 mm² (single- or fine-stranded). The insulation between main and auxiliary circuits is double-insulated.

Mounting and Installation

Mounting is on a 35 mm DIN rail in accordance with EN 60715. The housing is made of a thermoplastic material in red, certified to UL 94 V-0. The installation dimensions correspond to 3 TE according to DIN 43880. The operating temperature range is between -40 °C and +80 °C. The protection rating is IP 20 (installed), providing protection against finger contact and solid foreign objects, but not against water or dust.

Operational Advantages

The modular design allows for easy replacement of protection modules without tools. The integrated fault indication and arrester monitoring increase safety and prevent unintended damage to downstream devices. The energy coordination within the Red/Line family ensures optimal alignment throughout the entire protection concept. Certifications from DEKRA, VDE, and UL confirm compliance with international safety standards.

Standards
CertificationUL
UL StandardUL 1449 5th edition
UL File NumberE319777
Technical data
Energy coordination with terminal equipment (≤ 10 m)type 2 + type 3
Nominal voltage (a.c.) (UN)230 / 400 V (50 / 60 Hz)
Max. continuous operating voltage (AC) (UC)275 V (50 / 60 Hz)
Nominal discharge current (8/20 µs) (In)20 kA
Max. discharge current (8/20 µs) (Imax)40 kA
Voltage protection level (UP)≤ 1.5 kV
Voltage protection level at 5 kA (UP)≤ 1 kV
Response time (tA)≤ 25 ns
Max. mains-side overcurrent protection125 A gG
Short-circuit withstand capability for max. mains-side overcurrent protection (ISCCR)50 kArms
Temporary overvoltage (UT) – characteristic335 V / 5 sec. – Festigkeit, 440 V / 120 min. – sicherer Ausfall
Operating temperature range (TU)-40 °C ... +80 °C
Operating state / fault indicationgreen / red
Number of ports1
Cross-sectional area (min.)1.5 mm2 solid / flexible
Cross-sectional area (max.)35 mm2 stranded / 25 mm2 flexible
For mounting on35 mm DIN rails acc. to EN 60715
Enclosure materialthermoplastic, red, UL 94 V-0
Place of installationindoor installation
Degree of protectionIP 20 (integrated)
Capacity3 Standard DIN module, DIN 43880
ApprovalsDEKRA, VDE, UL
Type of remote signalling contactchangeover contact
Switching capacity (a.c.)250 V / 0.5 A
Switching capacity (d.c.)250 V / 0.1 A; 125 V / 0.2 A; 75 V / 0.5 A
Cross-sectional area for remote signalling terminalsmax. 1.5 mm2 solid / flexible
Test values according to UL 1449
Rated Voltage (AC, 50/60 Hz)230 V
MCOV (AC, 50/60 Hz) [L-N]/[L-G]/[N-G]275 V
Voltage protection rating (VPR)1500 V
Nominal discharge current (8/20µs) ( In)20 kA
Maximum ambient temperature85 °C
UL 1449 edition5th edition
Type (SPD classification)Type 4 component assembly


Product data sheet
Datasheet for DEHN 952305, EAN: 4013364108448

Questions & answers

What is the delivery time of DEHN 952305 DGMTNC275FM surge arrester type 2 guard M 3-pole for TN-C?

The article DEHN 952305 DGMTNC275FM surge arrester type 2 guard M 3-pole for TN-C is currently in stock

According to our experience the article is ready for dispatch within 3 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of DEHN 952305 to our sales team for an exact delivery time.

How can I buy the item at a lower price?

We offer you DEHN 952305 DGMTNC275FM surge arrester type 2 guard M 3-pole for TN-C always at the best possible price. We can give you a discount of 2% on DEHN 952305 DGMTNC275FM surge arrester type 2 guard M 3-pole for TN-C if you choose payment in advance on ordering.

In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 4 pieces of DEHN 952305 DGMTNC275FM surge arrester type 2 guard M 3-pole for TN-C we can offer you a price of 292,87 EUR per piece. The more you buy, the cheaper the article will be.

We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

 


Searching
Search is performed.
Please be patient ...
Fehlende Felder
Close
Product in the shopcart

The following item has been put into your shopping cart by our system:

1x DEHN 952305 Surge Arrester 3-pole TN-C
DEHN 952305 DGMTNC275FM surge arrester type 2 guard M 3-pole for TN-C
338,58 EUR
Sum of all articles in cart
plus VAT
You can continue shopping and open your cart at any time from the top menu bar or now directly by clicking the button.
Enquiry: DEHN 952305 Surge Arrester 3-pole TN-C
Company name
Name
Homepage
Street
ZIP-Code City
Country
Telephone
Desired quantity
Comment
1 + 6 =
Data protection notice: The data entered here will only be electronically stored and processed for the purpose of responding to your inquiry in accordance with Art. 6 GDPR para. 1b. The basis for this is our privacy policy.
Name and email address are the only mandatory fields.

We use cookies. Some are required to run the shop (e.g. shopping cart and login), others help us improve it (Google Analytics). Statistics cookies are only used with your consent. See our privacy policy for details.