DEHN 952096 DGS600FM surge arrester Type 2 guard S 1-pole 600 V AC
|
133,38 EUR 134,94 EUR |
|||||||||||
|
( 158,72 EUR incl. VAT ) ≈ £111.64 | ≈ $146.58 plus delivery charges: 55,00 € |
|||||||||||
| Made to order · Delivery time approx. 20 workdaysinfo_outline | |||||||||||
| Datasheet: | file_download Download | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lieske Part No.: | 791448 | ||||||||||
| Mfg Part No: | 952096 | ||||||||||
| UPC/EAN: | 4013364109926 | ||||||||||
| Weight: | 0.171 kg | ||||||||||
| Type: | DG S 600 FM | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for DEHN 952096:
Applications
The arrester is intended for use in electrical installations within the low-voltage range, particularly in buildings where sensitive electronic devices are connected. It protects connected consumers against overvoltages caused by lightning effects, network disturbances, or other electrical interference sources. The application typically occurs in the transition zone between outdoor and indoor installations, where voltage spikes are most intense.
Functions and Equipment in Detail
The DEHNguard S 600 FM provides high device safety through integrated arrester monitoring with Thermo-Dynamic-Control. This technology continuously monitors the condition of the arrester and responds to thermal overloads, which may indicate damage or malfunction. This enables early detection of defects, increasing the reliability of the protection system. The device is designed for use in electrical installations dimensioned according to the lightning protection zone concept.
Technology Explained Simply
The arrester operates according to the principle of a Type 2 surge arrester in accordance with EN 61643-11. When overvoltages exceed a certain threshold, it diverts the energy through a discharge resistor or varistor to reduce the voltage to a level tolerable for connected devices. The Thermo-Dynamic-Control technology monitors the temperature of the protection module and can trigger an alarm or shutdown process if signs of overload are detected. This prevents a defective arrester from continuing to operate in the network and thus posing a hazard.
Compatibility and Accessories
The arrester is designed for use in low-voltage installations and can be used in combination with other DEHN protection devices to implement a comprehensive protection concept. It is used at interfaces 0B – 1 and higher within the lightning protection zone concept, with exact positioning depending on the specific installation configuration.
Mounting and Installation
Installation takes place in a suitable enclosure or distribution box. The device is connected to the respective line, with electrical connections to be made in accordance with applicable standards and regulations. Mounting is achieved by inserting the protection module into the base unit, enabling quick and secure installation.
Advantages in Operation
The DEHNguard S 600 FM provides reliable protection for sensitive electronic devices. The integrated monitoring technology increases safety by enabling early detection of defects. The modular design allows for easy maintenance and replacement of the protection module without having to replace the entire device. Compliance with standard EN 61643-11 ensures standardized performance and compatibility with other protection systems.
| General | |
| Degree of protection | Type 2 |
| Norm | EN 61643-11 |
| Monitoring technology | Thermo-Dynamik-Control |
| Application area | low-voltage consumer installations |
| Use in lightning protection zone concept | interfaces 0B – 1 and higher |
| Type of device | Single-pole surge arrester |
| Manufacturer | DEHN |
| Construction | base unit with inserted protection module |
| Technical data | |
| Max. continuous operating voltage (AC) (UC) | 600 V (50 / 60 Hz) |
| Nominal discharge current (8/20 µs) (In) | 20 kA |
| Max. discharge current (8/20 µs) (Imax) | 40 kA |
| Voltage protection level (UP) | ≤ 2.5 kV |
| Max. mains-side overcurrent protection | 100 A gG |
| Approvals | DEKRA, VDE, UL, CSA |
| Type of remote signalling contact | changeover contact |
| Test values according to UL 1449 | |
| Rated Voltage (AC, 50/60 Hz) | 600 V |
| MCOV (AC, 50/60 Hz) | 600 V |
| MLV (AC, 50/60 Hz) | 2820 V |
| Nominal discharge current (8/20µs) ( In) | 20 kA |
| Maximum ambient temperature | +85 °C |
| AWG (conductors) | 2-14 Cu solid/stranded |
| AWG (remote indicator) | 14-22 Cu |
| UL 1449 edition | 5th edition |
| Type (SPD classification) | Type 4 component assembly |
Questions & answers
What is the delivery time of DEHN 952096 DGS600FM surge arrester Type 2 guard S 1-pole 600 V AC?
The article DEHN 952096 DGS600FM surge arrester Type 2 guard S 1-pole 600 V AC is currently not in stock and must be ordered on a per-order basis.
According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of DEHN 952096 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you DEHN 952096 DGS600FM surge arrester Type 2 guard S 1-pole 600 V AC always at the best possible price. We can give you a discount of 2% on DEHN 952096 DGS600FM surge arrester Type 2 guard S 1-pole 600 V AC if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 5 pieces of DEHN 952096 DGS600FM surge arrester Type 2 guard S 1-pole 600 V AC we can offer you a price of 125,38 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.




