DEHN 952035 DGP C S FM surge arrester Type 2 gap C S for TT systems
|
143,83 EUR 145,53 EUR |
|||||||||||
|
( 171,16 EUR incl. VAT ) ≈ £120.24 | ≈ $158.93 plus delivery charges: 55,00 € |
|||||||||||
| Made to order · Delivery time approx. 20 workdaysinfo_outline | |||||||||||
| Lieske Part No.: | 117038 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfg Part No: | 952035 | ||||||||||
| UPC/EAN: | 4013364108547 | ||||||||||
| Weight: | 0.125 kg | ||||||||||
| Type: | DGP C S FM | ||||||||||
|
Graduated prices net
|
|||||||||||
Further Surge Protection from DEHNFurther products in category Surge Protection
All products of DEHN
Product information for DEHN 952035:
The DEHN surge arrester type DGP C S FM, manufacturer's number 952035, is a single-pole N-PE surge arrester of the DEHNgap C S series, designed for use in TT systems. It protects low-voltage consumer installations against transient overvoltages caused by lightning strikes or network disturbances. The arrester is classified as Type 2 according to the standard EN 61643-11 and is installed in 3+1 or 1+1 configurations between the neutral conductor (N) and the protective earth conductor (PE). It is part of the lightning protection zone concept and can be used at interfaces 0B, -1 and higher to ensure electrical safety in buildings and installations.
Applications
This arrester is specifically designed for TT systems, where the protective earth conductor PE is directly connected to the earthing system, while the neutral conductor N is connected via a separate earthing point in the distribution box. In such systems, installing an N-PE surge arrester is particularly important to minimize the risk of overvoltages between N and PE, which can arise from inductive or capacitive coupling. It is typically mounted in distribution boxes or at the entry interface of consumer systems to protect sensitive electrical equipment inside.
Functions and Equipment in Detail
The arrester consists of a base unit and a plug-in protection module, enabling modular and flexible installation. The protection module is designed to divert overvoltages between N and PE and activates during overvoltage events to reduce the voltage to a safe level. The construction ensures reliable operation under normal conditions and during disturbances. Its use within the lightning protection zone concept at interfaces 0B to -1 and higher enables a structured and standard-compliant protection concept that safeguards the entire installation from transient voltage spikes.
Technology Explained Simply
The arrester operates on the principle of overvoltage diversion: when a voltage exceeding the permissible operating range occurs, the protection module activates within nanoseconds and diverts the excess energy to the protective earth conductor PE. This prevents the overvoltage from reaching the connected consumer installations. The standard EN 61643-11 defines requirements for Type-2 surge protection devices, which are installed close to the equipment to be protected and are designed to divert energy from lightning and network disturbances. Thus, the arrester is suitable for use near sensitive electrical equipment.
Compatibility and Accessories
The arrester is designed for use in TT systems and can be installed in 3+1 or 1+1 configurations. It is part of the DEHNgap C S series, designed for modular installations in distribution boxes. Precise installation is carried out in a suitable distribution box, with electrical connections made according to the relevant standards and installation instructions.
Mounting and Installation
Installation takes place in a suitable distribution box, with the arrester connected between the neutral conductor (N) and the protective earth conductor (PE). Installation must comply with the relevant standards and the installation instructions. Connections are made via the designated terminal clamps, designed for the required cross-sections.
Operational Advantages
The arrester provides reliable protection against transient overvoltages caused by lightning strikes or network disturbances. Its modular design allows for flexible installation and maintenance. Compliance with EN 61643-11 ensures high safety and reliability. Its use within the lightning protection zone concept at interfaces 0B to -1 and higher enables a structured and standard-compliant protection concept that safeguards the entire installation from transient voltage spikes. Installation in TT systems is particularly important to minimize the risk of overvoltages between N and PE.
Applications
This arrester is specifically designed for TT systems, where the protective earth conductor PE is directly connected to the earthing system, while the neutral conductor N is connected via a separate earthing point in the distribution box. In such systems, installing an N-PE surge arrester is particularly important to minimize the risk of overvoltages between N and PE, which can arise from inductive or capacitive coupling. It is typically mounted in distribution boxes or at the entry interface of consumer systems to protect sensitive electrical equipment inside.
Functions and Equipment in Detail
The arrester consists of a base unit and a plug-in protection module, enabling modular and flexible installation. The protection module is designed to divert overvoltages between N and PE and activates during overvoltage events to reduce the voltage to a safe level. The construction ensures reliable operation under normal conditions and during disturbances. Its use within the lightning protection zone concept at interfaces 0B to -1 and higher enables a structured and standard-compliant protection concept that safeguards the entire installation from transient voltage spikes.
Technology Explained Simply
The arrester operates on the principle of overvoltage diversion: when a voltage exceeding the permissible operating range occurs, the protection module activates within nanoseconds and diverts the excess energy to the protective earth conductor PE. This prevents the overvoltage from reaching the connected consumer installations. The standard EN 61643-11 defines requirements for Type-2 surge protection devices, which are installed close to the equipment to be protected and are designed to divert energy from lightning and network disturbances. Thus, the arrester is suitable for use near sensitive electrical equipment.
Compatibility and Accessories
The arrester is designed for use in TT systems and can be installed in 3+1 or 1+1 configurations. It is part of the DEHNgap C S series, designed for modular installations in distribution boxes. Precise installation is carried out in a suitable distribution box, with electrical connections made according to the relevant standards and installation instructions.
Mounting and Installation
Installation takes place in a suitable distribution box, with the arrester connected between the neutral conductor (N) and the protective earth conductor (PE). Installation must comply with the relevant standards and the installation instructions. Connections are made via the designated terminal clamps, designed for the required cross-sections.
Operational Advantages
The arrester provides reliable protection against transient overvoltages caused by lightning strikes or network disturbances. Its modular design allows for flexible installation and maintenance. Compliance with EN 61643-11 ensures high safety and reliability. Its use within the lightning protection zone concept at interfaces 0B to -1 and higher enables a structured and standard-compliant protection concept that safeguards the entire installation from transient voltage spikes. Installation in TT systems is particularly important to minimize the risk of overvoltages between N and PE.
| General | |
| Norm | EN 61643-11 |
| Degree of protection | N-PE |
| System | TT system |
| Circuit | 3+1, 1+1 |
| Use in lightning protection zone concept | Interfaces 0B, -1 and higher |
| Product type | Surge arrester |
| Manufacturer | DEHN |
| Model | DGP C S FM |
| Product series | DEHNgap C S |
| Connection | Between neutral conductor N and protective earth conductor PE |
| Function | Diverting overvoltages |
| Purpose | protection of low-voltage consumer installations |
Questions & answers
What is the delivery time of DEHN 952035 DGP C S FM surge arrester Type 2 gap C S for TT systems?
The article DEHN 952035 DGP C S FM surge arrester Type 2 gap C S for TT systems is currently not in stock and must be ordered on a per-order basis.
According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of DEHN 952035 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you DEHN 952035 DGP C S FM surge arrester Type 2 gap C S for TT systems always at the best possible price. We can give you a discount of 2% on DEHN 952035 DGP C S FM surge arrester Type 2 gap C S for TT systems if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 5 pieces of DEHN 952035 DGP C S FM surge arrester Type 2 gap C S for TT systems we can offer you a price of 135,20 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.