DEHN 951405 DVMTNS255FM combination earthing bar Type 1 valve M for 3-phase TN-S systems
|
1.900,95 EUR |
|||||||||||
|
( 2.262,13 EUR incl. VAT ) ≈ £1,591.10 | ≈ $2,089.14 plus delivery charges: 55,00 € |
|||||||||||
| Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline | |||||||||||
| In Stock: >5 pieces | |||||||||||
| Lieske Part No.: | 495192 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfg Part No: | 951405 | ||||||||||
| UPC/EAN: | 4013364108165 | ||||||||||
| Weight: | 1.399 kg | ||||||||||
| Type: | DV M TNS 255 FM | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for DEHN 951405:
Applications
The combination surge arrester is designed for use in TN-S systems, which are commonly used in electrical engineering for supplying consumers in buildings and industrial facilities. It protects electrical installations and end devices against transient overvoltages caused by atmospheric discharges or switching operations in the network. The suitability for interfaces 0A to 2 makes it particularly suitable for use at the entry interface of an installation, where the highest overvoltage stress is expected.
Functions and Equipment in Detail
The device combines the protective functions of Type 1 and Type 2 in a single component, resulting in a compact and efficient solution. The RADAX-Flow follow-current limitation ensures that after an overvoltage impulse, the follow current is quickly reduced, increasing the availability of the installation and minimizing damage to downstream equipment. The modular design allows flexible adaptation to different installation configurations, with individual protection modules inserted into the base unit.
Technology Explained Simply
The operation is based on spark gaps, which are bridged during overvoltage to divert the overvoltage current. The RADAX-Flow technology reduces the residual current that may continue to flow after the impulse, thereby reducing the load on the installation. The protection modules are designed for specific conductors (e.g., phase, neutral conductor) and are inserted into the base unit, enabling individual configuration. Standard EN 61643-11 defines the requirements for surge protection devices, with Type 1 intended for direct lightning strikes and Type 2 for indirect overvoltages.
The application occurs at interfaces 0A to 2 of the lightning protection zone concept, meaning the device is installed at the entry interface of the installation to protect the entire downstream electrical installation. The modular design allows flexible adaptation to the specific installation, with protection modules being exchangeable or expandable according to requirements.
Compatibility and Accessories
The combination surge arrester is designed for TN-S systems, which are typically used in buildings with separate neutral and protective conductors. The modular design allows combination with additional protection modules specifically designed for the respective installation. Use in conjunction with other DEHN products that also follow the lightning protection zone concept is possible to ensure a consistent protection strategy.
Mounting and Installation
Installation takes place at the entry interface of the electrical installation, in accordance with the requirements of the lightning protection zone concept. The base unit is installed in the distribution unit, with protection modules inserted according to the conductor configuration (e.g., 3-phase system). Mounting requires compliance with electrical standards and adherence to safety regulations when handling high voltage.
Advantages in Operation
By combining Type 1 and Type 2 protection in a single device, a compact and efficient protection solution is achieved. The RADAX-Flow follow-current limitation increases the availability of the installation, as the follow current is quickly reduced. The modular design allows flexible adaptation to different installation configurations, simplifying maintenance and expansion of the protection system. Compliance with standard EN 61643-11 ensures reliability and safety of the device in practice.
| General | |
| Degree of protection | Type 1 + Type 2 in accordance with EN 61643-11 |
| Technology | spark gap base |
| Follow-up current limitation | RADAX-Flow |
| Application | low-voltage consumer installations |
| Insert interfaces | 0A - 2 Lightning protection zone concept |
| System type | TN-S systems |
| Modularity | Base unit with inserted protection modules |
Questions & answers
What is the delivery time of DEHN 951405 DVMTNS255FM combination earthing bar Type 1 valve M for 3-phase TN-S systems?
The article DEHN 951405 DVMTNS255FM combination earthing bar Type 1 valve M for 3-phase TN-S systems is currently in stock
According to our experience the article is ready for dispatch within 3 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of DEHN 951405 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you DEHN 951405 DVMTNS255FM combination earthing bar Type 1 valve M for 3-phase TN-S systems always at the best possible price. We can give you a discount of 2% on DEHN 951405 DVMTNS255FM combination earthing bar Type 1 valve M for 3-phase TN-S systems if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 2 pieces of DEHN 951405 DVMTNS255FM combination earthing bar Type 1 valve M for 3-phase TN-S systems we can offer you a price of 1.772,64 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

