DEHN 918401 BVTRS4855 surge arrester BLITZDUCTOR VT for bus systems
|
242,91 EUR 245,82 EUR |
|||||||||||
|
( 289,06 EUR incl. VAT ) ≈ £203.32 | ≈ $266.96 plus delivery charges: 55,00 € |
|||||||||||
| Made to order · Delivery time approx. 20 workdaysinfo_outline | |||||||||||
| Datasheet: | file_download Download | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lieske Part No.: | 474156 | ||||||||||
| Mfg Part No: | 918401 | ||||||||||
| UPC/EAN: | 4013364074224 | ||||||||||
| Weight: | 0.199 kg | ||||||||||
| Type: | BVT RS485 5 | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for DEHN 918401:
Applications
The arrester is suitable for a wide range of applications, particularly for four-wire symmetric interfaces such as RS485/422, used in industrial automation, building automation or process control. It can also be used for temperature sensors, where reliable signal transmission is required despite electromagnetic interference. The possibility of direct or indirect shield grounding, as well as the connection of a signal ground (SG), expands the application possibilities in complex systems with different grounding concepts.
Functions and equipment in detail
The arrester features six connection terminals, intended for connecting the input and output of the signal lines as well as for grounding. The cross-sections for single-strand and fine-strand wires range from 0.08 to 2.5 mm². The tightening torque for the screw terminals is 0.5 Nm. Grounding is achieved via a screw terminal, which enables a secure and durable connection to the grounding system. The housing is made of a thermoplastic material that meets the flame protection class UL 94 V-0 and is finished in yellow. The protection rating IP 20 ensures protection against contact with fingers and against solid foreign objects, but not against water or dust.
Technology explained simply
The arrester protects connected devices from overvoltages caused by lightning discharges, electrical disturbances or other transient voltage spikes. During an overvoltage impulse, the arrester diverts the energy via the protection function, with the protection level Ad-Ad being ≤ 20 V at a nominal discharge current of 10 kA (8/20 µs). This value ensures that the connected devices are not damaged by the overvoltage. The protection level Ad-PG is ≤ 700 V under the same conditions. At a rapid voltage rise of 1 kV/µs, the protection level Ad-Ad is ≤ 8.5 V and Ad-PG is ≤ 600 V. The series impedance per wire is 1.8 Ohm, ensuring minimal signal distortion. The cutoff frequency Ad-Ad is 1.7 MHz, defining the bandwidth for signal transmission. The capacitance Ad-Ad is ≤ 5 nF, limiting the signal capacitance and thus maintaining signal integrity.
Compatibility and accessories
The arrester is designed for use in systems with RS485/422 interfaces and can be used in combination with other device protection systems that are also tested according to IEC 61643-21. Mounting on the 35 mm DIN rail allows for easy integration into existing enclosures. The direct or indirect shield grounding, as well as the connection of a signal ground (SG), allows for flexible adaptation to various system configurations. Certification according to CSA and the marks CE and UKCA confirm compliance with applicable safety and quality standards.
Mounting and installation
Mounting is done on a 35 mm DIN rail, with the arrester's width being 3 TE. The screw terminals allow for easy and secure connection of the signal lines. The grounding terminal must be connected to the grounding system to ensure the protection function. The operating temperature range is between -40 °C and +80 °C, enabling use in a wide variety of environments.
Advantages in operation
The arrester provides reliable protection for sensitive electronic devices against transient overvoltages. The combination of low series impedance, low protection level and high capacitance ensures efficient signal transmission with minimal interference. Mounting on the DIN rail and the screw terminals simplify installation and maintenance. Compliance with international standards ensures high quality and safety in operation.
| General | |
| SPD class | Q |
| Max. continuous operating voltage DC (UC) | 6 V |
| Nominal current (IN) | 0.5 A |
| D1 Lightning impulse current (10/350 µs) per line (Iimp) | 0.8 kA |
| C2 Total nominal discharge current (8/20 µs) (In) | 10 kA |
| Series impedance per line | 1.8 ohms |
| Cut-off frequency line-line (fG) | 1.7 MHz |
| Approvals | CSA |
Questions & answers
What is the delivery time of DEHN 918401 BVTRS4855 surge arrester BLITZDUCTOR VT for bus systems?
The article DEHN 918401 BVTRS4855 surge arrester BLITZDUCTOR VT for bus systems is currently not in stock and must be ordered on a per-order basis.
According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of DEHN 918401 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you DEHN 918401 BVTRS4855 surge arrester BLITZDUCTOR VT for bus systems always at the best possible price. We can give you a discount of 2% on DEHN 918401 BVTRS4855 surge arrester BLITZDUCTOR VT for bus systems if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 5 pieces of DEHN 918401 BVTRS4855 surge arrester BLITZDUCTOR VT for bus systems we can offer you a price of 228,34 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.



