DEHN 918401, EAN: 4013364074224

DEHN 918401 BVT RS485 5 surge arrester

Energy > Surge Protection

DEHN 918401 BVT RS485 5 surge arrester

Lieske Part No. 474156
Mfg Part No 918401
EAN-Code 4013364074224
Manufacturer DEHN
Here only 242,91 EUR
289,06 EUR incl. VAT

Further information for DEHN 918401 BVT RS485 5 surge arrester

General
SPD classQ
Max. continuous operating voltage DC (UC)6 V
Nominal current (IN)0.5 A
D1 Lightning impulse current (10/350 µs) per line (Iimp)0.8 kA
C2 Total nominal discharge current (8/20 µs) (In)10 kA
Series impedance per line1.8 ohms
Cut-off frequency line-line (fG)1.7 MHz
ApprovalsCSA
The DEHN surge arrester type BVT RS485 5 is a compact device protection for multi-wire signal paths, specifically designed for use in industrial and technical installations. It belongs to the BLITZDUCTOR VT product family and is intended for the protection of bus interfaces such as RS485, RS422 or V.11. The arrester is designed for mounting on a 35 mm DIN rail in accordance with EN 60715 and offers screw terminal connections for secure connection of the cables. It is designed for use in systems with a nominal voltage of 5 V DC, with the maximum continuous voltage at 6 V DC. The nominal current is 0.5 A. The protection function is provided by a Class Q arrester, which is tested in accordance with IEC 61643-21 / EN 61643-21 and energy-coordinated according to IEC 61643-22.

Applications

The arrester is suitable for a wide range of applications, particularly for four-wire symmetric interfaces such as RS485/422, used in industrial automation, building automation or process control. It can also be used for temperature sensors, where reliable signal transmission is required despite electromagnetic interference. The possibility of direct or indirect shield grounding, as well as the connection of a signal ground (SG), expands the application possibilities in complex systems with different grounding concepts.

Functions and equipment in detail

The arrester features six connection terminals, intended for connecting the input and output of the signal lines as well as for grounding. The cross-sections for single-strand and fine-strand wires range from 0.08 to 2.5 mm². The tightening torque for the screw terminals is 0.5 Nm. Grounding is achieved via a screw terminal, which enables a secure and durable connection to the grounding system. The housing is made of a thermoplastic material that meets the flame protection class UL 94 V-0 and is finished in yellow. The protection rating IP 20 ensures protection against contact with fingers and against solid foreign objects, but not against water or dust.

Technology explained simply

The arrester protects connected devices from overvoltages caused by lightning discharges, electrical disturbances or other transient voltage spikes. During an overvoltage impulse, the arrester diverts the energy via the protection function, with the protection level Ad-Ad being ≤ 20 V at a nominal discharge current of 10 kA (8/20 µs). This value ensures that the connected devices are not damaged by the overvoltage. The protection level Ad-PG is ≤ 700 V under the same conditions. At a rapid voltage rise of 1 kV/µs, the protection level Ad-Ad is ≤ 8.5 V and Ad-PG is ≤ 600 V. The series impedance per wire is 1.8 Ohm, ensuring minimal signal distortion. The cutoff frequency Ad-Ad is 1.7 MHz, defining the bandwidth for signal transmission. The capacitance Ad-Ad is ≤ 5 nF, limiting the signal capacitance and thus maintaining signal integrity.

Compatibility and accessories

The arrester is designed for use in systems with RS485/422 interfaces and can be used in combination with other device protection systems that are also tested according to IEC 61643-21. Mounting on the 35 mm DIN rail allows for easy integration into existing enclosures. The direct or indirect shield grounding, as well as the connection of a signal ground (SG), allows for flexible adaptation to various system configurations. Certification according to CSA and the marks CE and UKCA confirm compliance with applicable safety and quality standards.

Mounting and installation

Mounting is done on a 35 mm DIN rail, with the arrester's width being 3 TE. The screw terminals allow for easy and secure connection of the signal lines. The grounding terminal must be connected to the grounding system to ensure the protection function. The operating temperature range is between -40 °C and +80 °C, enabling use in a wide variety of environments.

Advantages in operation

The arrester provides reliable protection for sensitive electronic devices against transient overvoltages. The combination of low series impedance, low protection level and high capacitance ensures efficient signal transmission with minimal interference. Mounting on the DIN rail and the screw terminals simplify installation and maintenance. Compliance with international standards ensures high quality and safety in operation.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/474156
qrcode für DEHN 918401 BVT RS485 5 surge arrester