Online retailer for industrial customers, commercial customers and public institutions - no sales to private customers
Switch to german languageIndustry-Electronics in English

DEHN 900050 DGPM1255S N-PE surge arrester gap Maxi 1 for TT systems

Your rating:
Average rating
product review for DEHN 900050 DGPM1255S N-PE surge arrester gap Maxi 1 for TT systems
( 4.6 / 5 ) 28 ratings
DEHN 900050
This image may differ from the desired article.
416,10 EUR 420,95 EUR
( 495,16 EUR incl. VAT )
≈ £348.28  |  ≈ $457.29
plus delivery charges: 55,00 €
Made to order · Delivery time approx. 20 workdaysinfo_outline
1x DEHN 900050 DGPM1255S N-PE surge arrester gap Maxi 1 for TT systems
Datasheet:file_download Download
Lieske Part No.:225324
Mfg Part No: 900050
UPC/EAN: 4013364107496
Weight:0.539 kg
Type:DGPM 1 255 S
Graduated prices net
From piecesPrice per pieces
4391,13 EUR
8366,17 EUR
12341,20 EUR
16316,24 EUR

Product information for DEHN 900050:

The DEHN DGPM 1 255 S is a single-pole, coordinated N-PE lightning current diverter from the DEHNgap Maxi S series, specifically designed for use in TT systems. It serves as a total current diverter and is installed in 3+1 and 1+1 configurations according to DIN VDE 0100-534 between the neutral conductor (N) and the protective conductor (PE). The device is mounted on industrial busbar systems to protect low-voltage consumer installations from overvoltages, even in the event of direct lightning strikes. The diverter is part of the lightning protection zone concept and is used at the interface between Zone 0A and Zone 1 in the 3+1 configuration.

Lightning current diverter
The DGPM 1 255 S is a Type 1 overvoltage protection device according to EN 6143-11. Type 1 devices are designed to handle lightning currents that may occur during direct lightning strikes. They provide the first line of protection in a building before energy enters the internal electrical installation. The coordination of the diverter ensures that it activates first in the event of an overvoltage, protecting subsequent protective devices.

Application areas
The diverter is specifically intended for TT systems, where the neutral conductor and protective conductor are separated in the network. It is used in industrial facilities where high energy flows and increased overvoltage risks exist. Mounting on busbar systems allows for flexible integration into existing installations and secure fixation within the electrical distribution system.

Functions and equipment in detail
The DGPM 1 255 S is an N-PE diverter that diverts overvoltages between the neutral conductor and the protective conductor. It is designed for use in 3+1 and 1+1 configurations, with the 3+1 configuration being the classic setup for industrial installations. The coordination of the device ensures that it activates first in the event of an overvoltage, protecting subsequent protection stages.

Technology explained simply
The diverter operates on the principle of voltage limitation. When overvoltages exceed a certain threshold, it switches within milliseconds and diverts the overvoltage current through the protective conductor. The technology is based on a gas discharge breakdown (GAP), which activates during overvoltage. The protection function occurs without mechanical movement, ensuring high service life and reliability.

Compatibility and accessories
The diverter is designed for mounting on industrial busbar systems. It is part of a comprehensive overvoltage protection concept and is used in combination with other protective devices within the lightning protection zone concept. Use in the 3+1 configuration requires integration into an existing distribution system that provides the appropriate connections for N and PE.

Mounting and installation
Mounting is done directly onto industrial busbar systems. It is essential to ensure that the electrical connections between the diverter and the conductors (N and PE) are secure and correctly made. Installation is carried out as part of lightning protection measures at the interface between Zone 0A and Zone 1, with the 3+1 configuration being the recommended setup.

Advantages in operation
The DGPM 1 255 S provides reliable protection against overvoltages, especially during direct lightning strikes. Coordination with subsequent protection stages minimizes the risk of damage to electrical devices and installations. Mounting on busbar systems enables flexible and secure integration into existing installations. Use in TT systems ensures optimal protection in facilities based on separated neutral and protective conductors.

General
Degree of protectionType 1
NormEN 6143-11
Circuit variant3+1 and 1+1
System typeTT system
Mounting methodon industrial busbar systems
FunctionN-PE surge arrester
Protection conceptlightning protection zones concept
Interface0A - 1
SPD according to EN 61643-11 / IEC 61643-11type 1 / class I
Max. continuous operating voltage (AC) (UC)255 V (50 / 60 Hz)
Lightning impulse current (10/350 µs) (Iimp)100 kA
Voltage protection level (UP)≤ 2.5 kV (including 80 cm connecting cable)
Monitoringvia DEHNsignal DSI E 3


Product data sheet
Datasheet for DEHN 900050, EAN: 4013364107496

Questions & answers

What is the delivery time of DEHN 900050 DGPM1255S N-PE surge arrester gap Maxi 1 for TT systems?

The article DEHN 900050 DGPM1255S N-PE surge arrester gap Maxi 1 for TT systems is currently not in stock and must be ordered on a per-order basis.

According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of DEHN 900050 to our sales team for an exact delivery time.

How can I buy the item at a lower price?

We offer you DEHN 900050 DGPM1255S N-PE surge arrester gap Maxi 1 for TT systems always at the best possible price. We can give you a discount of 2% on DEHN 900050 DGPM1255S N-PE surge arrester gap Maxi 1 for TT systems if you choose payment in advance on ordering.

In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 4 pieces of DEHN 900050 DGPM1255S N-PE surge arrester gap Maxi 1 for TT systems we can offer you a price of 391,13 EUR per piece. The more you buy, the cheaper the article will be.

We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

 


Searching
Search is performed.
Please be patient ...
Fehlende Felder
Close
Product in the shopcart

The following item has been put into your shopping cart by our system:

1x DEHN 900050 DGPM 1 255 S N-PE lightning surge arrester gap Maxi 1
DEHN 900050 DGPM1255S N-PE surge arrester gap Maxi 1 for TT systems
416,10 EUR
Sum of all articles in cart
plus VAT
You can continue shopping and open your cart at any time from the top menu bar or now directly by clicking the button.
Enquiry: DEHN 900050 DGPM 1 255 S N-PE lightning surge arrester gap Maxi 1
Company name
Name
Homepage
Street
ZIP-Code City
Country
Telephone
Desired quantity
Comment
9 + 5 =
Data protection notice: The data entered here will only be electronically stored and processed for the purpose of responding to your inquiry in accordance with Art. 6 GDPR para. 1b. The basis for this is our privacy policy.
Name and email address are the only mandatory fields.

We use cookies. Some are required to run the shop (e.g. shopping cart and login), others help us improve it (Google Analytics). Statistics cookies are only used with your consent. See our privacy policy for details.