DEHN 900050, EAN: 4013364107496

DEHN 900050 DGPM 1 255 S N-PE lightning surge arrester gap Maxi 1

Energy > Surge Protection

DEHN 900050 DGPM 1 255 S N-PE lightning surge arrester gap Maxi 1

Lieske Part No. 225324
Mfg Part No 900050
EAN-Code 4013364107496
Manufacturer DEHN
Here only 416,10 EUR
495,16 EUR incl. VAT

Further information for DEHN 900050 DGPM 1 255 S N-PE lightning surge arrester gap Maxi 1

General
Degree of protectionType 1
NormEN 6143-11
Circuit variant3+1 and 1+1
System typeTT system
Mounting methodon industrial busbar systems
FunctionN-PE surge arrester
Protection conceptlightning protection zones concept
Interface0A - 1
SPD according to EN 61643-11 / IEC 61643-11type 1 / class I
Max. continuous operating voltage (AC) (UC)255 V (50 / 60 Hz)
Lightning impulse current (10/350 µs) (Iimp)100 kA
Voltage protection level (UP)≤ 2.5 kV (including 80 cm connecting cable)
Monitoringvia DEHNsignal DSI E 3
The DEHN DGPM 1 255 S is a single-pole, coordinated N-PE lightning current diverter from the DEHNgap Maxi S series, specifically designed for use in TT systems. It serves as a total current diverter and is installed in 3+1 and 1+1 configurations according to DIN VDE 0100-534 between the neutral conductor (N) and the protective conductor (PE). The device is mounted on industrial busbar systems to protect low-voltage consumer installations from overvoltages, even in the event of direct lightning strikes. The diverter is part of the lightning protection zone concept and is used at the interface between Zone 0A and Zone 1 in the 3+1 configuration.

Lightning current diverter
The DGPM 1 255 S is a Type 1 overvoltage protection device according to EN 6143-11. Type 1 devices are designed to handle lightning currents that may occur during direct lightning strikes. They provide the first line of protection in a building before energy enters the internal electrical installation. The coordination of the diverter ensures that it activates first in the event of an overvoltage, protecting subsequent protective devices.

Application areas
The diverter is specifically intended for TT systems, where the neutral conductor and protective conductor are separated in the network. It is used in industrial facilities where high energy flows and increased overvoltage risks exist. Mounting on busbar systems allows for flexible integration into existing installations and secure fixation within the electrical distribution system.

Functions and equipment in detail
The DGPM 1 255 S is an N-PE diverter that diverts overvoltages between the neutral conductor and the protective conductor. It is designed for use in 3+1 and 1+1 configurations, with the 3+1 configuration being the classic setup for industrial installations. The coordination of the device ensures that it activates first in the event of an overvoltage, protecting subsequent protection stages.

Technology explained simply
The diverter operates on the principle of voltage limitation. When overvoltages exceed a certain threshold, it switches within milliseconds and diverts the overvoltage current through the protective conductor. The technology is based on a gas discharge breakdown (GAP), which activates during overvoltage. The protection function occurs without mechanical movement, ensuring high service life and reliability.

Compatibility and accessories
The diverter is designed for mounting on industrial busbar systems. It is part of a comprehensive overvoltage protection concept and is used in combination with other protective devices within the lightning protection zone concept. Use in the 3+1 configuration requires integration into an existing distribution system that provides the appropriate connections for N and PE.

Mounting and installation
Mounting is done directly onto industrial busbar systems. It is essential to ensure that the electrical connections between the diverter and the conductors (N and PE) are secure and correctly made. Installation is carried out as part of lightning protection measures at the interface between Zone 0A and Zone 1, with the 3+1 configuration being the recommended setup.

Advantages in operation
The DGPM 1 255 S provides reliable protection against overvoltages, especially during direct lightning strikes. Coordination with subsequent protection stages minimizes the risk of damage to electrical devices and installations. Mounting on busbar systems enables flexible and secure integration into existing installations. Use in TT systems ensures optimal protection in facilities based on separated neutral and protective conductors.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/225324
qrcode für DEHN 900050 DGPM 1 255 S N-PE lightning surge arrester gap Maxi 1