Online retailer for industrial customers, commercial customers and public institutions - no sales to private customers
Switch to german languageIndustry-Electronics in English

DEHN 478450 EWDMVK8.10 M10 L500 700 V4A earth/panel penetration 500–700 mm L720 mm

Your rating:
Average rating
product review for DEHN 478450 EWDMVK8.10 M10 L500 700 V4A earth/panel penetration 500–700 mm L720 mm
( 4.4 / 5 ) 11 ratings
DEHN 478450
This image may differ from the desired article.
DEHN 478450DEHN 478450
70,97 EUR
( 84,45 EUR incl. VAT )
≈ £59.40  |  ≈ $78.00
plus delivery charges: 55,00 €
Delivery time from supplier's stock (ca.) 5 workdaysinfo_outline
In Stock: >5 pieces
1x DEHN 478450 EWDMVK8.10 M10 L500 700 V4A earth/panel penetration 500–700 mm L720 mm
Datasheet:file_download Download
Lieske Part No.:527799
Mfg Part No: 478450
UPC/EAN: 4013364136359
Weight:0.78 kg
Type:EWD MVK8.10 M10 L500 700 V4A
Graduated prices net
From piecesPrice per pieces
666,71 EUR
1262,45 EUR
2458,20 EUR
3653,94 EUR

Product information for DEHN 478450:

The earth and wall penetration EWD MVK8.10 M10 L500 700 V4A from DEHN is a component specifically designed for use in earthing and equipotential bonding systems. It enables pressure-water-tight penetration of earth or equipotential bonding conductors through walls and masonry, with the connection made via an MV terminal clamp made of NIRO (V4A). The penetration is designed for round conductors with a diameter of 8 to 10 mm and features a threaded rod M10 made of NIRO, which allows for secure fastening in the building component. The construction is intended for retrofitted installation, where either a drilled hole with a diameter of 14 mm or the use of a pre-formed opening in the formwork is possible. The pressure water test up to 1 bar corresponds to an installation depth of up to 10 m relative to standing water, ensuring suitability for use in wet or submerged areas.

Earth and wall penetration is the product type specifically developed for use in electrical protection systems. The MV terminal clamp enables a secure and corrosion-resistant connection with the conductor, while the use of NIRO (V4A) as the material for the clamp and sealing washer ensures high corrosion resistance and long-term stability. The material numbers 1.4571, 1.4404, and 1.4401, as well as the ASTM / AISI designations 316Ti, 316L, and 316, confirm the use of high-quality stainless steels that are also resistant in aggressive environments. The sealings made of neoprene ensure a tight seal and prevent moisture or water from entering the components.

Applications include use in buildings where earth or equipotential bonding conductors must be routed through walls or masonry, particularly in areas with increased humidity, such as basements, foundations, or near water connections. The penetration length is 500 to 700 mm, with the total length of the threaded rod being 708 mm. This allows for flexible adaptation to different wall thicknesses. The sealing washers have a diameter of 80 mm and provide sufficient surface area for sealing and fastening.

Functions and equipment in detail include the MV terminal clamp, specifically designed for round conductors of 8 to 10 mm, and the M10 threaded rod made of NIRO, which enables secure mechanical anchoring in the building component. The neoprene sealings ensure a tight seal that remains effective under pressure water load up to 1 bar. The pressure water tightness test up to 1 bar corresponds to an installation depth of up to 10 m relative to standing water, ensuring suitability for use in wet or submerged areas.

Technology explained simply shows that the design aims for a durable and secure connection. The use of NIRO (V4A) for the clamp, sealing washer, threaded rod, and nut ensures high corrosion resistance. The neoprene sealings are elastic and dimensionally stable, ensuring a tight seal even under temperature fluctuations. The short-circuit current withstand capability of 2.7 kA (AC 50 Hz / DC, 1 s, ≤ 300 °C) demonstrates the component’s ability to withstand short-term high current loads, which is critical for use in protection systems.

Compatibility and accessories refer to use with round conductors of 8 to 10 mm diameter. The MV terminal clamp is specifically designed for this conductor diameter, ensuring a secure and firm connection. The M10 threaded rod allows fastening in building components with corresponding threading. Compliance with DIN EN 62561-1 ensures that the required requirements for earth and wall penetrations are met.

Installation and mounting is performed as a retrofitted installation, where either a drilled hole with a diameter of 14 mm or the use of a pre-formed opening in the formwork is possible. The threaded rod is screwed into the building component, with the sealing washers and sealings providing the seal. The MV terminal clamp is connected to the conductor, establishing the electrical connection.

Operational advantages include high corrosion resistance due to the use of NIRO (V4A), secure and tight sealing provided by neoprene sealings, and the ability to withstand pressure water loads up to 1 bar. The short-circuit current withstand capability of 2.7 kA ensures operational safety, even under short-term high current loads. Compliance with the DIN EN 62561-1 standard ensures the quality and reliability of the component.

General
Length of bushing (l2)500-700 mm
Length of threaded rod (l1)708 mm
SealingsNeoprene
Sealing disk Ø80 mm
Material of discStSt (V4A)
Material No.1.4571 / 1.4404 / 1.4401
Short-circuit current (AC 50 Hz / DC) (1 s; ≤ 300 °C)2.7 kA
StandardEN 62561-1


Product data sheet
Datasheet for DEHN 478450, EAN: 4013364136359

Questions & answers

What is the delivery time of DEHN 478450 EWDMVK8.10 M10 L500 700 V4A earth/panel penetration 500–700 mm L720 mm?

The article DEHN 478450 EWDMVK8.10 M10 L500 700 V4A earth/panel penetration 500–700 mm L720 mm is currently in stock

According to our experience the article is ready for dispatch within 5 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of DEHN 478450 to our sales team for an exact delivery time.

How can I buy the item at a lower price?

We offer you DEHN 478450 EWDMVK8.10 M10 L500 700 V4A earth/panel penetration 500–700 mm L720 mm always at the best possible price. We can give you a discount of 2% on DEHN 478450 EWDMVK8.10 M10 L500 700 V4A earth/panel penetration 500–700 mm L720 mm if you choose payment in advance on ordering.

In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 6 pieces of DEHN 478450 EWDMVK8.10 M10 L500 700 V4A earth/panel penetration 500–700 mm L720 mm we can offer you a price of 66,71 EUR per piece. The more you buy, the cheaper the article will be.

We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

 


Searching
Search is performed.
Please be patient ...
Fehlende Felder
Close
Product in the shopcart

The following item has been put into your shopping cart by our system:

1x DEHN 478450 EWD MVK8.10 M10 L500 700 V4A earth-to-wall passage 500-700 mm
DEHN 478450 EWDMVK8.10 M10 L500 700 V4A earth/panel penetration 500–700 mm L720 mm
70,97 EUR
Sum of all articles in cart
plus VAT
You can continue shopping and open your cart at any time from the top menu bar or now directly by clicking the button.
Enquiry: DEHN 478450 EWD MVK8.10 M10 L500 700 V4A earth-to-wall passage 500-700 mm
Company name
Name
Homepage
Street
ZIP-Code City
Country
Telephone
Desired quantity
Comment
1 + 3 =
Data protection notice: The data entered here will only be electronically stored and processed for the purpose of responding to your inquiry in accordance with Art. 6 GDPR para. 1b. The basis for this is our privacy policy.
Name and email address are the only mandatory fields.

We use cookies. Some are required to run the shop (e.g. shopping cart and login), others help us improve it (Google Analytics). Statistics cookies are only used with your consent. See our privacy policy for details.