DEHN 478450, EAN: 4013364136359

DEHN 478450 EWD MVK8.10 M10 L500 700 V4A earth-to-wall passage 500-700 mm

Energy > Surge Protection

DEHN 478450 EWD MVK8.10 M10 L500 700 V4A earth-to-wall passage 500-700 mm

Lieske Part No. 527799
Mfg Part No 478450
EAN-Code 4013364136359
Manufacturer DEHN
Here only 70,97 EUR
84,45 EUR incl. VAT

Further information for DEHN 478450 EWD MVK8.10 M10 L500 700 V4A earth-to-wall passage 500-700 mm

General
Length of bushing (l2)500-700 mm
Length of threaded rod (l1)708 mm
SealingsNeoprene
Sealing disk Ø80 mm
Material of discStSt (V4A)
Material No.1.4571 / 1.4404 / 1.4401
Short-circuit current (AC 50 Hz / DC) (1 s; ≤ 300 °C)2.7 kA
StandardEN 62561-1
The earth and wall penetration EWD MVK8.10 M10 L500 700 V4A from DEHN is a component specifically designed for use in earthing and equipotential bonding systems. It enables pressure-water-tight penetration of earth or equipotential bonding conductors through walls and masonry, with the connection made via an MV terminal clamp made of NIRO (V4A). The penetration is designed for round conductors with a diameter of 8 to 10 mm and features a threaded rod M10 made of NIRO, which allows for secure fastening in the building component. The construction is intended for retrofitted installation, where either a drilled hole with a diameter of 14 mm or the use of a pre-formed opening in the formwork is possible. The pressure water test up to 1 bar corresponds to an installation depth of up to 10 m relative to standing water, ensuring suitability for use in wet or submerged areas.

Earth and wall penetration is the product type specifically developed for use in electrical protection systems. The MV terminal clamp enables a secure and corrosion-resistant connection with the conductor, while the use of NIRO (V4A) as the material for the clamp and sealing washer ensures high corrosion resistance and long-term stability. The material numbers 1.4571, 1.4404, and 1.4401, as well as the ASTM / AISI designations 316Ti, 316L, and 316, confirm the use of high-quality stainless steels that are also resistant in aggressive environments. The sealings made of neoprene ensure a tight seal and prevent moisture or water from entering the components.

Applications include use in buildings where earth or equipotential bonding conductors must be routed through walls or masonry, particularly in areas with increased humidity, such as basements, foundations, or near water connections. The penetration length is 500 to 700 mm, with the total length of the threaded rod being 708 mm. This allows for flexible adaptation to different wall thicknesses. The sealing washers have a diameter of 80 mm and provide sufficient surface area for sealing and fastening.

Functions and equipment in detail include the MV terminal clamp, specifically designed for round conductors of 8 to 10 mm, and the M10 threaded rod made of NIRO, which enables secure mechanical anchoring in the building component. The neoprene sealings ensure a tight seal that remains effective under pressure water load up to 1 bar. The pressure water tightness test up to 1 bar corresponds to an installation depth of up to 10 m relative to standing water, ensuring suitability for use in wet or submerged areas.

Technology explained simply shows that the design aims for a durable and secure connection. The use of NIRO (V4A) for the clamp, sealing washer, threaded rod, and nut ensures high corrosion resistance. The neoprene sealings are elastic and dimensionally stable, ensuring a tight seal even under temperature fluctuations. The short-circuit current withstand capability of 2.7 kA (AC 50 Hz / DC, 1 s, ≤ 300 °C) demonstrates the component’s ability to withstand short-term high current loads, which is critical for use in protection systems.

Compatibility and accessories refer to use with round conductors of 8 to 10 mm diameter. The MV terminal clamp is specifically designed for this conductor diameter, ensuring a secure and firm connection. The M10 threaded rod allows fastening in building components with corresponding threading. Compliance with DIN EN 62561-1 ensures that the required requirements for earth and wall penetrations are met.

Installation and mounting is performed as a retrofitted installation, where either a drilled hole with a diameter of 14 mm or the use of a pre-formed opening in the formwork is possible. The threaded rod is screwed into the building component, with the sealing washers and sealings providing the seal. The MV terminal clamp is connected to the conductor, establishing the electrical connection.

Operational advantages include high corrosion resistance due to the use of NIRO (V4A), secure and tight sealing provided by neoprene sealings, and the ability to withstand pressure water loads up to 1 bar. The short-circuit current withstand capability of 2.7 kA ensures operational safety, even under short-term high current loads. Compliance with the DIN EN 62561-1 standard ensures the quality and reliability of the component.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/527799
qrcode für DEHN 478450 EWD MVK8.10 M10 L500 700 V4A earth-to-wall passage 500-700 mm