Products of Cimco
Categories with products from Cimco
- Electronics ➤ Energy ➤ Extensions / cable drums ( 9 )
- Electrics ➤ Industrial Material ➤ Industrial Connectors ➤ Small connector ( 1 )
- Electrics ➤ Installation ➤ Cable joint sets ➤ Casting resin and cable sleeves ( 11 )
- Electrics ➤ Installation ➤ Grounding Systems ➤ Lightning protection material ( 5 )
- Electrics ➤ Installation ➤ Isolation / Identification ➤ Servicesprays ( 1 )
- Electrics ➤ Installation ➤ Securing material ➤ NH fuses and accessories ( 1 )
- Electrics ➤ Installation ➤ Terminals ➤ Cable lugs, connectors, blank - isolated ( 268 )
- Light & Sound ➤ Light Systems ➤ Downlights ➤ Downlights for NV ( 2 )
- Light & Sound ➤ Light Systems ➤ Living Room Lamps ➤ Recessed lighting ( 1 )
- Light & Sound ➤ Light Systems ➤ Pocket Lamps ( 1 )
- Electronics ➤ Measurement ➤ Cable Testers ( 1 )
- Electronics ➤ Measurement ➤ Measuring Instruments ➤ Spirit Levels ( 3 )
- Electronics ➤ Measurement ➤ Multimeters ( 1 )
- Electronics ➤ Measurement ➤ Other Measuring Devices ( 15 )
- Electronics ➤ Measurement ➤ Testers ( 1 )
- Electronics ➤ Measurement ➤ Voltage Measurement ( 2 )
- IT-Equipment ➤ Office Equipment ➤ POS Consumables ➤ Wristbands ( 7 )
- Technology ➤ Security Technology ➤ Sensors ➤ Fire & Gas Detectors ( 1 )
- Technology ➤ Tools ➤ Cable Drum Uncoilers ( 9 )
- Technology ➤ Tools ➤ Cable Pulling Systems ( 87 )
- Technology ➤ Tools ➤ Drills ( 163 )
- Technology ➤ Tools ➤ Knifes ( 42 )
- Technology ➤ Tools ➤ Ladders ( 6 )
- Technology ➤ Tools ➤ Miscellaneous ( 850 )
- Technology ➤ Tools ➤ Pliers ➤ Pliers Kits ( 6 )
- Technology ➤ Tools ➤ Power Tool Accessories ➤ Step & Taper Drills ( 13 )
- Technology ➤ Tools ➤ Power Tools ➤ Automotive ( 1 )
- Technology ➤ Tools ➤ Punches ( 2 )
- Technology ➤ Tools ➤ Safety & Workwear Equipment ➤ Head Protection ( 4 )
- Technology ➤ Tools ➤ Saws ( 13 )
- Technology ➤ Tools ➤ Screwdrivers ( 120 )
- Technology ➤ Tools ➤ Soldering Tools ➤ Soldering Accessories ( 7 )
- Technology ➤ Tools ➤ Tool Storage ➤ Toolboxes ( 47 )
- Technology ➤ Tools ➤ Wrenches ( 201 )
 |
 Cimco 101884Cimco 101884 pressing pliers hexagonal pressing 16-95qmm L530mmCrimping pliers for tubular cable lugs and connectors 'standard version', hexagonal crimping with built-in, rotating profile discs, leverage, cross section 16-95 mm², length 530 mm Lieske Part No.: 380085 Mfg Part No: 101884 |
348,69 EUR
 plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 101885Cimco 101885 Crimping pliers , Crimping pliers for tubular cable lugs and connectors 'standard version', hexagonal crimping with built-in, rotating profile discs, leverage, cross section 25-150 mm², length 650 mm Lieske Part No.: 828637 Mfg Part No: 101885 |
396,21 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 101886Cimco 101886 hexagon crimping pliers , 16-650mm 95q Crimping pliers, hexagonal crimping with built-in, rotating profile discs, leverage, for compression cable lugs and connectors DIN 46235/46267, 16-95 mm², length 650 mm Lieske Part No.: 100278 Mfg Part No: 101886 |
348,69 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 101888Cimco 101888 hexagon crimping pliers , 25-650mm 150qmm Compound leverage Crimping pliers, hexagonal crimping with built-in, rotating profile discs, leverage, for compression cable lugs and connectors DIN 46235/46267, 25-150 mm², length 650 mm Lieske Part No.: 752058 Mfg Part No: 101888 |
396,21 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 101890 101890Cimco 101890 Crimping pliers WM-Pressung 6-50 mm² For tubular cable lugs and connectors Crimping pliers with rotating profile disks, leverage, for tubular cable lugs and connectors. WM crimping profile for cross sections 6 - 50 mm². Approved for conductor classes 2, 5 and 6 according to ... Lieske Part No.: 682724 Mfg Part No: 101890 |
298,14 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
|
|
Cimco 101891 101891Cimco 101891 Crimping pliers WM-Pressung 10-120 mm² For tubular cable lugs and connections. Crimping pliers with rotating profile disks, leverage, for tubular cable lugs and connectors. WM crimping profile for cross sections 10-120 mm². Approved for conductor classes 2, 5 and 6 according to ... Lieske Part No.: 300270 Mfg Part No: 101891 |
359,18 EUR
plus delivery charges
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
 |
Cimco 101892Cimco 101892 pressing pliers Economy oval pressing 0.5-6mm² L220mm Economy crimping pliers for insulated and non-insulated cable lugs, with wire and screw cutter up to M5, as well as stripping device 0.5-6 mm², crimping of stranded wire and cable insulation takes ... Lieske Part No.: 611367 Mfg Part No: 101892 |
19,74 EUR 20,44 EUR
plus delivery charges
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
 |
Cimco 101902Cimco 101902 pressing pliers mandrel pressing 0.75-16qmm lever transfer with locking device. Crimping pliers for tubular cable lugs and connectors 'standard version', mandrel crimping 0.75-16 mm², lever-operated, with locking device (pressure point release), length 325 mm Lieske Part No.: 596809 Mfg Part No: 101902 |
191,44 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 101904Cimco 101904 notch indent crimping pliers 0.5-16 mm ², for cable end and cable lugs Hand crimping pliers, mandrel crimping 0.5-16 mm² for insulated and non-insulated wire end ferrules and twin wire end ferrules Lieske Part No.: 514668 Mfg Part No: 101904 |
50,73 EUR
plus delivery charges
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
 |
Cimco 101905Cimco 101905 Universal Crimping pliers , 10 - 35 mm Hand crimping pliers, mandrel crimping 10.0-35 mm² for insulated and non-insulated wire end ferrules and twin wire end ferrules Lieske Part No.: 963028 Mfg Part No: 101905 |
53,50 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 101906Cimco 101906 pressing pliers mandrel pressing 0.5-2.5qmm L150mm Hand crimping pliers for insulated and non-insulated wire end ferrules and twin wire end ferrules, mandrel crimping 0.5-2.5 mm², length 150 mm Lieske Part No.: 483283 Mfg Part No: 101906 |
38,04 EUR
plus delivery charges
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
 |
Cimco 101907Cimco 101907 crimping pliers 140 mm , Hand crimping pliers, for insulated and non-insulated wire end ferrules and twin wire end ferrules, mandrel crimping 1.5-6 mm², length 150 mm Lieske Part No.: 972052 Mfg Part No: 101907 |
40,10 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 101909Compound leverage Cimco indent crimping Crimping pliers 101909, 0.5-16mm 325mm Crimping pliers for non-insulated cable lugs and stainless steel tubular cable lugs (VA), lever-operated, locking device (pressure point release), mandrel crimping 0.5 - 16 mm², length 325 mm Lieske Part No.: 271885 Mfg Part No: 101909 |
191,44 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 101911Cimco 101911 Crimping pliers , Hand crimping pliers for insulated and non-insulated wire end ferrules and twin wire end ferrules, trapezoidal crimp 0.25-2.5 mm², length 150 mm Lieske Part No.: 567070 Mfg Part No: 101911 |
53,50 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 101916Cimco 101916 Crimping pliers , Crimping pliers for insulated cable lugs, lever action, with ratchet mechanism and reorderable locking device (pressure point release), double pressing, oval pressing, symmetrical, standard 0 5-6 ... Lieske Part No.: 164809 Mfg Part No: 101916 |
120,95 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 101918Cimco 101918 Oval crimping Crimping pliers , 10-215mm 16mm Crimping pliers for insulated cable lugs, lever action, with ratchet mechanism and adjustable locking device (pressure point release), double crimping, oval crimping 10.0-16 mm², length 215 mm Lieske Part No.: 812427 Mfg Part No: 101918 |
181,55 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 101931Cimco 101931 processing tool, Heavy-duty cable tie tensioning and cutting tool made of sheet steel for cable ties with a width of 2.3 mm to 9.5 mm, with integrated cutting tool. Heavy-duty version 195 mm Lieske Part No.: 786076 Mfg Part No: 101931 |
70,51 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 101935Cimco 101935 chuck, 205mm steel Steel clamping tool for clamping steel ties up to 12 mm wide, also with cable protection coating, with rotary cutter for burr-free band cutting Lieske Part No.: 504782 Mfg Part No: 101935 |
121,69 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 101945 101945Cimco 101945 front pressing pliers 0.5-16 MMY Front crimping pliers Flexi-Crimp Pro, wire end ferrule crimping pliers up to 16 mm² with proven technology as with Flexi Crimp, item no. 10 1940, setting of the crimping ranges via selector switch 0. Lieske Part No.: 1011965 Mfg Part No: 101945 |
157,04 EUR
plus delivery charges
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
 |
Cimco 101950 101950Cimco 101950 ferrule crimping pliers Wire end ferrule crimping pliers FLEXI-CRIMP 6, hexagonal crimping 0.08-16/2x0.5 to 2x10 mm², cross-section range from 0.08 to 16 mm² (for single wires), as well as 2x0.5 to 2x10 mm² (for twin wire ... Lieske Part No.: 1781530 Mfg Part No: 101950 |
171,61 EUR
plus delivery charges
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
 |
Cimco 102000Cimco 102000 Preßzangen set , Presszangenset STANDARD Crimping Tool with 4 interchangeable crimping profile inserts in impact-resistant plastic case type: 2 Quantity: ST. Lieske Part No.: 982114 Mfg Part No: 102000 |
298,54 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 102001Cimco 102001 use to 102000 AE 0.5 - 16 mm ² Press profile inserts loose for 10 2000 trapezoidal pressing 1 pair, insulated and non-insulated wire end ferrules according to DIN: 0.5-0.75-1.5-2.5-4-6-10-16 mm², AWG: 22-20-16-14-12-10-8-6 Lieske Part No.: 855044 Mfg Part No: 102001 |
45,71 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 102002Cimco 102002 CIM use to 102000 Press profile inserts loose, roll pressing 1 pair of 10 2000 - for non-insulated connectors with open crimp claws according to DIN: 0.5 to 1, 1.5 to 2.5, 4 to 6 mm², AWG: 18/20-14/16-10/12 Lieske Part No.: 301913 Mfg Part No: 102002 |
42,95 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Cimco 102003Cimco 102003 pressing profile inserts loose, Indent crimping not isolierterbinder Press profile inserts loose, mandrel pressing non-insulated cable lugs, DIN: 1.5 to 10 mm², AWG: 20 to 8 Lieske Part No.: 986853 Mfg Part No: 102003 |
42,95 EUR
plus delivery charges
Delivery time on requestinfo_outline
|