Cimco 183171 right-angle pipe cable lug Cu 90° 16 mm² normal bolt 6 mm
|
96,59 EUR |
|
|
incl. 10,85 EUR copper surcharge ( 114,94 EUR incl. VAT ) ≈ £80.85 | ≈ $106.15 plus delivery charges: 55,00 € |
|
| Made to order · Delivery time approx. 20 workdaysinfo_outline | |
| Sales unit: 100 pieces | |
| Datasheet: | file_download Download |
|---|---|
| Lieske Part No.: | 203881 |
| Mfg Part No: | 183171 |
| UPC/EAN: | 4021103831717 |
| Weight: | 1 kg |
| Type: | 183171 |
Product information for Cimco 183171:
Angle pipe cable lugs are commonly used in electrical installations to securely connect cables to pipe conduits, where the angled design enables better strain relief and more compact mounting. The material Cu-ETP (Electrolytic Copper) complies with DIN EN 13600 and ensures high electrical conductivity as well as mechanical stability. The surface is galvanically tinned, providing good corrosion resistance and a secure connection during crimping. The tinning is particularly advantageous when working with fine-stranded conductors according to IEC 228, as it supports an even crimp connection and minimizes the risk of breaks or poor contacts.
Cable lugs of this type are frequently used in industrial electrical installations, building technology, and distribution technology. The angle pipe cable lug design enables efficient mounting in switchgear, where cables must be introduced into the conduit plane at a right angle. Crimping is performed using a crimping tool, with the specified crimp lengths of 7 mm (for one crimp) and 5 mm (for two crimps) ensuring that the connection remains mechanically stable and electrically conductive. The annealing treatment to copper hardness F 20 ensures optimal formability during crimping without compromising the material's strength.
Technology explained clearly: Crimping is a process in which the cable lug is applied to the conductor using a special tool to create a secure, durable, and conductive connection. The crimp lengths of 7 mm and 5 mm refer to the length required during crimping to securely fix the conductor. The specification crimp 7 mm: 2,5 cm ( 1 inch ) means that a single crimp with a length of 7 mm is sufficient, while "crimp 5 mm: 2 means that two crimps, each 5 mm long, are required to achieve the same connection security. The choice depends on the crimping tool used and the specific requirements of the installation.
Compatibility and accessories: The cable lug is suitable for fine-stranded conductors according to IEC 228, making it usable for a wide range of cable types in electrical installations. It is not specifically designed for a particular brand or series of accessories, but can be universally used in systems with 6 mm bolts. Crimping must be performed according to the requirements of standards and manufacturer instructions to ensure a secure connection.
Mounting and installation: Mounting is done by crimping the cable lug onto the conductor, ensuring that the crimp lengths and number comply with the technical specifications. The 6 mm diameter bolt is inserted into the designated screw connection, with mechanical strength ensured by the crimping and material quality. Use in enclosures or distributors requires careful planning of cable routing to optimally utilize the angled design.
Operational advantages: The galvanic tinning and annealing treatment ensure high reliability of the connection, even during frequent mounting and dismounting operations. The angled design enables compact and orderly cabling, facilitating maintenance and inspection. The use of Cu-ETP ensures long service life and high electrical conductivity, which is crucial for the safety and efficiency of the installation.
The article is supplied in a packaging unit of 100 pieces. The weight per 100 pieces is approximately 1 kg. The specifications refer to the technical data provided by the manufacturer Cimco and are relevant for planning and executing electrical installations. Use must comply with applicable standards and regulations in electrical engineering.
The item price shown refers to 100 pieces Cimco 183171
| General | |
| Material | Cu-ETP |
| Surface protection | Galvanic tinned |
| Model | 95° angled |
| Cross section | 16 mm² |
| Pin diameter | 6 mm |
| Operation temperature | 90 °C |
| Compression 7 mm | 1 |
| Compression 5 mm | 2 |
| Hardness, copper | F 20 |
| Compatibility | fine-stranded conductors IEC 228 |
Questions & answers
What is the delivery time of Cimco 183171 right-angle pipe cable lug Cu 90° 16 mm² normal bolt 6 mm?
The article Cimco 183171 right-angle pipe cable lug Cu 90° 16 mm² normal bolt 6 mm is currently not in stock and must be ordered on a per-order basis.
According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Cimco 183171 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Cimco 183171 right-angle pipe cable lug Cu 90° 16 mm² normal bolt 6 mm always at the best possible price. We can give you a discount of 2% on Cimco 183171 right-angle pipe cable lug Cu 90° 16 mm² normal bolt 6 mm if you choose payment in advance on ordering.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.
How many units does the article contain?
Cimco 183171 right-angle pipe cable lug Cu 90° 16 mm² normal bolt 6 mm is offered by us in a sales unit of 100 pieces If you need a larger quantity, you can contact us at any time. We will make a special offer for you



