Cimco 183171, EAN: 4021103831717

Cimco 183171 angle conduit cable lug 16 mm²

Installation > Terminals > Cable lugs, connectors, blank - isolated

Cimco 183171 angle conduit cable lug 16 mm²

Lieske Part No. 203881
Mfg Part No 183171
EAN-Code 4021103831717
Manufacturer Cimco
Here only 96,59 EUR
114,94 EUR incl. VAT

Further information for Cimco 183171 angle conduit cable lug 16 mm²

General
MaterialCu-ETP
Surface protectionGalvanic tinned
Model95° angled
Cross section16 mm²
Pin diameter6 mm
Operation temperature90 °C
Compression 7 mm1
Compression 5 mm2
Hardness, copperF 20
Compatibilityfine-stranded conductors IEC 228
The article 183171 from Cimco is an angle pipe cable lug made of copper, designed in standard version for an operating temperature of 90 °C. It is specifically designed for use in electrical installations where a secure and durable connection between cables and pipe conduits is required. The angled shape with a 95° angle allows for optimal placement in tight mounting areas, particularly in enclosures or distributors, where a vertical connection direction is not possible. The cable lug is designed for a conductor cross-section of 16 mm² and features a bolt with a diameter of 6 mm, intended for fastening to corresponding screw connection points.

Angle pipe cable lugs are commonly used in electrical installations to securely connect cables to pipe conduits, where the angled design enables better strain relief and more compact mounting. The material Cu-ETP (Electrolytic Copper) complies with DIN EN 13600 and ensures high electrical conductivity as well as mechanical stability. The surface is galvanically tinned, providing good corrosion resistance and a secure connection during crimping. The tinning is particularly advantageous when working with fine-stranded conductors according to IEC 228, as it supports an even crimp connection and minimizes the risk of breaks or poor contacts.

Cable lugs of this type are frequently used in industrial electrical installations, building technology, and distribution technology. The angle pipe cable lug design enables efficient mounting in switchgear, where cables must be introduced into the conduit plane at a right angle. Crimping is performed using a crimping tool, with the specified crimp lengths of 7 mm (for one crimp) and 5 mm (for two crimps) ensuring that the connection remains mechanically stable and electrically conductive. The annealing treatment to copper hardness F 20 ensures optimal formability during crimping without compromising the material's strength.

Technology explained clearly: Crimping is a process in which the cable lug is applied to the conductor using a special tool to create a secure, durable, and conductive connection. The crimp lengths of 7 mm and 5 mm refer to the length required during crimping to securely fix the conductor. The specification crimp 7 mm: 2,5 cm ( 1 inch ) means that a single crimp with a length of 7 mm is sufficient, while "crimp 5 mm: 2 means that two crimps, each 5 mm long, are required to achieve the same connection security. The choice depends on the crimping tool used and the specific requirements of the installation.

Compatibility and accessories: The cable lug is suitable for fine-stranded conductors according to IEC 228, making it usable for a wide range of cable types in electrical installations. It is not specifically designed for a particular brand or series of accessories, but can be universally used in systems with 6 mm bolts. Crimping must be performed according to the requirements of standards and manufacturer instructions to ensure a secure connection.

Mounting and installation: Mounting is done by crimping the cable lug onto the conductor, ensuring that the crimp lengths and number comply with the technical specifications. The 6 mm diameter bolt is inserted into the designated screw connection, with mechanical strength ensured by the crimping and material quality. Use in enclosures or distributors requires careful planning of cable routing to optimally utilize the angled design.

Operational advantages: The galvanic tinning and annealing treatment ensure high reliability of the connection, even during frequent mounting and dismounting operations. The angled design enables compact and orderly cabling, facilitating maintenance and inspection. The use of Cu-ETP ensures long service life and high electrical conductivity, which is crucial for the safety and efficiency of the installation.

The article is supplied in a packaging unit of 100 pieces. The weight per 100 pieces is approximately 1 kg. The specifications refer to the technical data provided by the manufacturer Cimco and are relevant for planning and executing electrical installations. Use must comply with applicable standards and regulations in electrical engineering.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/203881
qrcode für Cimco 183171 angle conduit cable lug 16 mm²