Online retailer for industrial customers, commercial customers and public institutions - no sales to private customers
Switch to german languageIndustry-Electronics in English
Cimco Logo

Cimco 120168 one-hand ratchet cable cutter

Your rating:
Average rating
product review for Cimco 120168 one-hand ratchet cable cutter
( 4.5 / 5 ) 36 ratings
Cimco 120168
This image may differ from the desired article.
Cimco 120168Cimco 120168
176,87 EUR 178,08 EUR
( 210,48 EUR incl. VAT )
≈ £148.04  |  ≈ $194.38
plus delivery charges: 55,00 €
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
In Stock: >10 pieces
1x Cimco 120168 one-hand ratchet cable cutter
Datasheet:file_download Download
Lieske Part No.:176167
Mfg Part No: 120168
UPC/EAN: 4021103201688
Weight:1 kg
Type:120168
Graduated prices net
From piecesPrice per pieces
5175,54 EUR
10174,22 EUR
15172,89 EUR
20171,56 EUR

Product information for Cimco 120168:

The Cimco one-hand ratchet cable cutter type 120168 is a tool for cut-free separation of cables with a maximum outer diameter of 45 mm. It is specifically designed for use in electrical and installation trades, where precise and ergonomic cable cutting is required. The tool enables cutting of copper and aluminium cables, but is not suitable for steel wire, steel-reinforced cables, or hard-drawn Cu and Bz conductors. The cutting force is generated by a ratchet mechanism with needle-bearing eccentric gear ratio, which provides high efficiency despite a compact design. The ergonomically shaped handles with a narrow opening width allow for ergonomic operation with one hand, while the handles are sufficiently long to be supported by the second hand under high loads.

Applications

The cable cutter is intended for use in installations and repairs in the field of electrical engineering, particularly for laying or replacing power and low-voltage cables. It is suitable for solid and stranded conductors, but does not support fine-stranded conductors. The maximum cutting capacity is up to 45 mm outer diameter for copper cables, up to 300 mm² (600 mCM) for stranded conductors, and up to 3x70SM for sector conductors. For aluminium cables, the maximum cutting capacity is also 45 mm outer diameter, up to 400 mm² (800 MCM) for stranded conductors, and up to 4x70 SE for sector conductors.

Functions and equipment in detail

The cutting jaws are made of specially hardened material to ensure a clean cut. The movable blade is fully rotatable and can be unlocked in any position, allowing flexible adaptation to different cable diameters. The cutting jaws are easily replaceable; the Cimco replacement swivel blade with article number 12 9168 is available as a spare part. The handles can be locked in place using a rotating knob with red marking, stabilising the tool in the open position. A locking latch allows for easy opening of the cutting blades, which can be locked in the open position.

Technology explained simply

The ratchet mechanism with eccentric gear ratio ensures that the cutting force is built up continuously without the user having to constantly apply force. The needle bearing of the eccentric gear ratio reduces friction and wear, extending the tool’s service life. The narrow opening width of the handles reduces the required force and enables precise control. The tool weighs 980 g, ensuring good handling even during prolonged use.

Compatibility and accessories

The tool is compatible with the Cimco replacement swivel blade 12 9168, which serves as a replacement part for the cutting jaws. It is not intended for use with steel wire or steel-reinforced cables, as these materials exceed the cutting force or may cause premature wear.

Mounting and installation

The cable cutter requires no mounting or installation. It is picked up and operated directly. Operation is performed by actuating the handles, with the ratchet mechanism building up the cutting force. The locking of the handles via the rotating knob enables secure storage or intermediate positioning.

Advantages in operation

Using the Cimco one-hand ratchet cable cutter reduces physical strain on the user, as the cutting force is supported by the ratchet mechanism. The clean cutting action avoids crushing points and ensures proper cable processing. The replaceable cutting jaws extend the tool’s service life, as only the cutting jaws need to be replaced in case of wear. The compact design and low weight facilitate transport and handling, especially in mobile applications.

General
Max. cable diameter45 mm
Max. cutting capacity copper300 mm²
Max. cutting capacity aluminium400 mm²
Grip design1-component
Total length220 mm
Handle lockingVia rotary knob
Locking latchlockable in open position
Replacement swivel gaugeCimco 12 9168
Suitable for copper cableYes
Suitable for aluminium cableYes
Useful for stranded conductorsYes
Suitable for fine strand conductorsNo
Suitable for solid coresYes
Cutting jaws exchangeableYes
VD*-approvedYes


Product data sheet
Datasheet for Cimco 120168, EAN: 4021103201688

Questions & answers

What is the delivery time of Cimco 120168 one-hand ratchet cable cutter?

The article Cimco 120168 one-hand ratchet cable cutter is currently in stock

According to our experience the article is ready for dispatch within 3 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Cimco 120168 to our sales team for an exact delivery time.

How can I buy the item at a lower price?

We offer you Cimco 120168 one-hand ratchet cable cutter always at the best possible price. We can give you a discount of 2% on Cimco 120168 one-hand ratchet cable cutter if you choose payment in advance on ordering.

In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 5 pieces of Cimco 120168 one-hand ratchet cable cutter we can offer you a price of 175,54 EUR per piece. The more you buy, the cheaper the article will be.

We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

 


Searching
Search is performed.
Please be patient ...
Fehlende Felder
Close
Product in the shopcart

The following item has been put into your shopping cart by our system:

1x Cimco 120168 One-Hand Ratchet Cable Cutter
Cimco 120168 one-hand ratchet cable cutter
176,87 EUR
Sum of all articles in cart
plus VAT
You can continue shopping and open your cart at any time from the top menu bar or now directly by clicking the button.
Enquiry: Cimco 120168 One-Hand Ratchet Cable Cutter
Company name
Name
Homepage
Street
ZIP-Code City
Country
Telephone
Desired quantity
Comment
7 + 1 =
Data protection notice: The data entered here will only be electronically stored and processed for the purpose of responding to your inquiry in accordance with Art. 6 GDPR para. 1b. The basis for this is our privacy policy.
Name and email address are the only mandatory fields.

We use cookies. Some are required to run the shop (e.g. shopping cart and login), others help us improve it (Google Analytics). Statistics cookies are only used with your consent. See our privacy policy for details.