Further information for Cimco 120168 One-Hand Ratchet Cable Cutter
General
Max. cable diameter
45 mm
Max. cutting capacity copper
300 mm²
Max. cutting capacity aluminium
400 mm²
Grip design
1-component
Total length
220 mm
Handle locking
Via rotary knob
Locking latch
lockable in open position
Replacement swivel gauge
Cimco 12 9168
Suitable for copper cable
Suitable for aluminium cable
Useful for stranded conductors
Suitable for fine strand conductors
Suitable for solid cores
Cutting jaws exchangeable
VD*-approved
The Cimco one-hand ratchet cable cutter type 120168 is a tool for cut-free separation of cables with a maximum outer diameter of 45 mm. It is specifically designed for use in electrical and installation trades, where precise and ergonomic cable cutting is required. The tool enables cutting of copper and aluminium cables, but is not suitable for steel wire, steel-reinforced cables, or hard-drawn Cu and Bz conductors. The cutting force is generated by a ratchet mechanism with needle-bearing eccentric gear ratio, which provides high efficiency despite a compact design. The ergonomically shaped handles with a narrow opening width allow for ergonomic operation with one hand, while the handles are sufficiently long to be supported by the second hand under high loads.
Applications
The cable cutter is intended for use in installations and repairs in the field of electrical engineering, particularly for laying or replacing power and low-voltage cables. It is suitable for solid and stranded conductors, but does not support fine-stranded conductors. The maximum cutting capacity is up to 45 mm outer diameter for copper cables, up to 300 mm² (600 mCM) for stranded conductors, and up to 3x70SM for sector conductors. For aluminium cables, the maximum cutting capacity is also 45 mm outer diameter, up to 400 mm² (800 MCM) for stranded conductors, and up to 4x70 SE for sector conductors.
Functions and equipment in detail
The cutting jaws are made of specially hardened material to ensure a clean cut. The movable blade is fully rotatable and can be unlocked in any position, allowing flexible adaptation to different cable diameters. The cutting jaws are easily replaceable; the Cimco replacement swivel blade with article number 12 9168 is available as a spare part. The handles can be locked in place using a rotating knob with red marking, stabilising the tool in the open position. A locking latch allows for easy opening of the cutting blades, which can be locked in the open position.
Technology explained simply
The ratchet mechanism with eccentric gear ratio ensures that the cutting force is built up continuously without the user having to constantly apply force. The needle bearing of the eccentric gear ratio reduces friction and wear, extending the tool’s service life. The narrow opening width of the handles reduces the required force and enables precise control. The tool weighs 980 g, ensuring good handling even during prolonged use.
Compatibility and accessories
The tool is compatible with the Cimco replacement swivel blade 12 9168, which serves as a replacement part for the cutting jaws. It is not intended for use with steel wire or steel-reinforced cables, as these materials exceed the cutting force or may cause premature wear.
Mounting and installation
The cable cutter requires no mounting or installation. It is picked up and operated directly. Operation is performed by actuating the handles, with the ratchet mechanism building up the cutting force. The locking of the handles via the rotating knob enables secure storage or intermediate positioning.
Advantages in operation
Using the Cimco one-hand ratchet cable cutter reduces physical strain on the user, as the cutting force is supported by the ratchet mechanism. The clean cutting action avoids crushing points and ensures proper cable processing. The replaceable cutting jaws extend the tool’s service life, as only the cutting jaws need to be replaced in case of wear. The compact design and low weight facilitate transport and handling, especially in mobile applications.