Chauvin Arnoux P01120409 Clamp MN60 CV for oscilloscopes
|
312,62 EUR |
|||||||||||
|
( 372,02 EUR incl. VAT ) ≈ £260.41 | ≈ $342.94 plus delivery charges: 55,00 € |
|||||||||||
| On order · Delivery time approx. 20 workdaysinfo_outline | |||||||||||
| Datasheet: | file_download Download | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lieske Part No.: | 777669 | ||||||||||
| Mfg Part No: | P01120409 | ||||||||||
| UPC/EAN: | 3760171412909 | ||||||||||
| Weight: | 0.5 kg | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for Chauvin Arnoux P01120409:
Applications
The MN60 is suitable for precise measurement of alternating currents in various technical applications, particularly in electrical engineering, for maintenance and servicing of machines and systems, as well as for analysing power consumption. The clamp is frequently used in industrial electrical engineering, for testing motors, transformers, and electrical circuits. The insulation of the current transformer protects the user and the measuring device from dangerous voltages, enabling safe measurement even in high-voltage environments.
Functions and Equipment in Detail
The clamp features two measurement ranges defined by the output/input ratio of 100 mV / A AC and 10 mV / A AC. This allows flexible adaptation to different measurement tasks, with the higher range suitable for smaller currents and the lower range for larger currents. The output signal is an alternating voltage transmitted to the measuring device via a coaxial cable with an insulated BNC connector. This construction ensures reliable and interference-free signal transmission, especially at high frequencies.
Technology Explained Simply
The current transformer operates on the principle of inductive current measurement: when a current-carrying conductor is passed through the clamp, the current generates a magnetic field that induces a voltage in the clamp. This induced voltage is proportional to the current in the conductor and is transmitted to the measuring device via the coaxial cable. The insulation of the transformer protects the measuring device and the user from dangerous voltages, as there is no galvanic connection between the object under test and the measuring device. The bandwidth of up to 10 kHz allows representation of rapid current changes, which is important for analysing transient events or diagnosing switching operations.
Compatibility and Accessories
The MN60 is primarily designed for use with oscilloscopes, but can also be operated with multimeters or power analysers. Connection is made via the insulated BNC connector, which is attached to the inputs of the mentioned devices. The clamp is not suitable for direct current measurements, as it only detects alternating currents. Compatibility with other measuring devices depends on their input characteristics, particularly the required impedance and maximum input voltage.
Installation and Mounting
Installation is carried out by simply clamping the conductor to be measured with the clamp. The clamp opening is designed for cables up to 20 mm in diameter, allowing even larger conductors to be measured. The clamp is not screwed or mounted, but positioned directly on the conductor. Measurement is performed without interrupting the circuit, enabling quick and safe testing. The insulation of the transformer ensures that no electrical connections exist between the object under test and the measuring device.
Advantages in Operation
The MN60 offers high measurement accuracy combined with safety due to galvanic isolation. The compact design and ergonomic shape facilitate handling, especially in tight or hard-to-reach areas. The use of two measurement ranges allows flexible adaptation to different current levels, making the clamp suitable for a wide range of applications. The bandwidth of 10 kHz enables capture of rapid current changes, which is beneficial for diagnosing electrical systems. The clamp is approved for use in installations up to CAT III 600 V or CAT IV 300 V, ensuring broad applicability in industrial and commercial environments.
| General | |
| Maximum AC measurement range | 240 A |
| Peak current measurement | 600 A |
| Bandwidth | 10 kHz |
| Output signal | Alternating voltage |
| Output/input ratio | 100 mV / A AC, 10 mV / A AC |
| Output | coaxial cable with insulated BNC connector |
| Insertion diameter | 20 mm |
| Application category | CAT III 600 V, CAT IV 300 V |
Questions & answers
What is the delivery time of Chauvin Arnoux P01120409 Clamp MN60 CV for oscilloscopes?
The article Chauvin Arnoux P01120409 Clamp MN60 CV for oscilloscopes is currently not in stock but has been backordered.
According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Chauvin Arnoux P01120409 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Chauvin Arnoux P01120409 Clamp MN60 CV for oscilloscopes always at the best possible price. We can give you a discount of 2% on Chauvin Arnoux P01120409 Clamp MN60 CV for oscilloscopes if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 4 pieces of Chauvin Arnoux P01120409 Clamp MN60 CV for oscilloscopes we can offer you a price of 310,28 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

