Chauvin Arnoux P01102157 Probe for remote control No. 4
|
65,66 EUR |
|||||||||||
|
( 78,14 EUR incl. VAT ) ≈ £54.76 | ≈ $73.34 plus delivery charges: 55,00 € |
|||||||||||
| On order · Delivery time approx. 20 workdaysinfo_outline | |||||||||||
| Datasheet: | file_download Download | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lieske Part No.: | 1927850 | ||||||||||
| Mfg Part No: | P01102157 | ||||||||||
| UPC/EAN: | 3663653001076 | ||||||||||
| Weight: | 0.123 kg | ||||||||||
|
Graduated prices net
|
|||||||||||
Further Measurement from Chauvin ArnouxFurther products in category Measurement
All products of Chauvin Arnoux
Product information for Chauvin Arnoux P01102157:
The remote probe No. 4 is an accessory for the installation testers C.A 6131 and C.A 6133 from Chauvin Arnoux. It enables wireless control of specific functions of the measuring device, enhancing safety and efficiency during testing of electrical installations. The probe allows remote operation of the TEST and MEM (only on C.A 6133) buttons, as well as the + (Ω/MΩ) connection. This enables the user to trigger the measurement with one hand while holding the test probe with the other, which is particularly advantageous during insulation and continuity tests.
Remote control functions
The probe controls the most important operating buttons of the installation tester remotely. The TEST button is activated via the probe to start a measurement. On devices of type C.A 6133, the MEM button is also remotely operable to store measurement results directly. The + (Ω/MΩ) connection can also be used via the probe, increasing flexibility in connection routing. These functions reduce the need to operate the main device directly and enable safe and efficient testing, especially in hard-to-reach areas.
Alarm function and user-friendliness
The probe works in conjunction with the integrated alarm function of the installation tester. During insulation and continuity tests, the measurement result is confirmed by an acoustic signal. This allows the tester to evaluate the measurement without directly reading the display, increasing work speed and focusing attention on the physical testing. The test probe is detachable, which simplifies maintenance and cleaning and supports adaptation to different operating conditions.
Compatibility and accessories
The probe is specifically designed for the installation testers C.A 6131 and C.A 6133. These devices are compliant with IEC 61557 for testing electrical installations and cover functions such as earth resistance measurement, loop impedance measurement, insulation testing, and FI/RCD testing. The probe is a supplementary tool that extends the functionality of these devices.
Application areas
The probe is primarily used in electrical installation, maintenance and testing services, as well as during commissioning of new installations. It supports the performance of safety tests, especially when testing residual current circuit breakers (RCDs) and checking continuity resistances. The combination of remote control and acoustic confirmation increases safety, as the tester does not need to remove hands from the test object to operate the device.
Scope of delivery
The scope of delivery includes the remote probe No. 4 and the operating instructions.
Compliance with standards
The installation testers C.A 6131 and C.A 6133, with which the probe is used, comply with standards IEC 61557-1, -2, -3, -4, -6, -7 and -10. Electrical safety is ensured in accordance with IEC 61010-1, IEC 61010-2-030, IEC 61010-2-034 and IEC 61326-1. The devices are approved for category 600 V CAT III and 300 V CAT II at the charging input.
Ergonomics and operation
The probe is ergonomically designed to enable comfortable handling. The detachable test probe and remote control functions reduce physical strain on the tester. Integration with existing installation testers allows seamless use without additional operating steps. The main device display features blue backlighting, improving readability in poor lighting conditions.
Operational advantages
The remote probe No. 4 increases efficiency when performing electrical tests. The ability to trigger the measurement with one hand while holding the test probe with the other reduces the risk of incorrect operation and enhances safety. The acoustic confirmation of the measurement allows for quick evaluation without directly reading the display, increasing work speed. Compatibility with installation testers C.A 6131 and C.A 6133, along with compliance with relevant standards, makes the probe a reliable tool for professional users in the field of electrical engineering.
Remote control functions
The probe controls the most important operating buttons of the installation tester remotely. The TEST button is activated via the probe to start a measurement. On devices of type C.A 6133, the MEM button is also remotely operable to store measurement results directly. The + (Ω/MΩ) connection can also be used via the probe, increasing flexibility in connection routing. These functions reduce the need to operate the main device directly and enable safe and efficient testing, especially in hard-to-reach areas.
Alarm function and user-friendliness
The probe works in conjunction with the integrated alarm function of the installation tester. During insulation and continuity tests, the measurement result is confirmed by an acoustic signal. This allows the tester to evaluate the measurement without directly reading the display, increasing work speed and focusing attention on the physical testing. The test probe is detachable, which simplifies maintenance and cleaning and supports adaptation to different operating conditions.
Compatibility and accessories
The probe is specifically designed for the installation testers C.A 6131 and C.A 6133. These devices are compliant with IEC 61557 for testing electrical installations and cover functions such as earth resistance measurement, loop impedance measurement, insulation testing, and FI/RCD testing. The probe is a supplementary tool that extends the functionality of these devices.
Application areas
The probe is primarily used in electrical installation, maintenance and testing services, as well as during commissioning of new installations. It supports the performance of safety tests, especially when testing residual current circuit breakers (RCDs) and checking continuity resistances. The combination of remote control and acoustic confirmation increases safety, as the tester does not need to remove hands from the test object to operate the device.
Scope of delivery
The scope of delivery includes the remote probe No. 4 and the operating instructions.
Compliance with standards
The installation testers C.A 6131 and C.A 6133, with which the probe is used, comply with standards IEC 61557-1, -2, -3, -4, -6, -7 and -10. Electrical safety is ensured in accordance with IEC 61010-1, IEC 61010-2-030, IEC 61010-2-034 and IEC 61326-1. The devices are approved for category 600 V CAT III and 300 V CAT II at the charging input.
Ergonomics and operation
The probe is ergonomically designed to enable comfortable handling. The detachable test probe and remote control functions reduce physical strain on the tester. Integration with existing installation testers allows seamless use without additional operating steps. The main device display features blue backlighting, improving readability in poor lighting conditions.
Operational advantages
The remote probe No. 4 increases efficiency when performing electrical tests. The ability to trigger the measurement with one hand while holding the test probe with the other reduces the risk of incorrect operation and enhances safety. The acoustic confirmation of the measurement allows for quick evaluation without directly reading the display, increasing work speed. Compatibility with installation testers C.A 6131 and C.A 6133, along with compliance with relevant standards, makes the probe a reliable tool for professional users in the field of electrical engineering.
| Eigenschaften | |
| Test voltage | 250 V / 500 V |
| Range | - |
| Measurement frequency | - |
| Frequency: range / resolution / accuracy | - |
| Communication | - |
| Software | - |
Questions & answers
What is the delivery time of Chauvin Arnoux P01102157 Probe for remote control No. 4?
The article Chauvin Arnoux P01102157 Probe for remote control No. 4 is currently not in stock but has been backordered.
According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Chauvin Arnoux P01102157 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Chauvin Arnoux P01102157 Probe for remote control No. 4 always at the best possible price. We can give you a discount of 2% on Chauvin Arnoux P01102157 Probe for remote control No. 4 if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 6 pieces of Chauvin Arnoux P01102157 Probe for remote control No. 4 we can offer you a price of 65,17 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.
Fitting accessory for Chauvin Arnoux P01102157 Probe for remote control No. 4
 |
Chauvin Arnoux P01102021 Accessory set for earthing measurement – 2 electrodes (50 m)
The accessory kit for grounding measurement from Chauvin Arnoux is a comprehensive measurement accessory, specifically designed for precise measurement of grounding resistance and specific earth ... Lieske Part No.: 218634 Mfg Part No: P01102021 |
293,02 EUR
 ≈ £244.38 | ≈ $327.30
On order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Chauvin Arnoux P01120421 Pliers MN73 CV 2-200/2
The MN73 current transformer from Chauvin Arnoux is a compact measuring device for precise detection of alternating currents in the range from very low to medium current strengths. The device is part ... Lieske Part No.: 328996 Mfg Part No: P01120421 |
383,18 EUR
≈ £319.57 | ≈ $428.01
On order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Chauvin Arnoux p01295457z Alligator clips CAT IV-1000 V 15 A red+black
Removable test probes from Chauvin Arnoux, specifically designed for use in low-voltage applications and residential environments. These test probes are designed for test leads with a 4 mm plug ... Lieske Part No.: 583891 Mfg Part No: p01295457z |
33,32 EUR
≈ £27.79 | ≈ $37.22
On order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Chauvin Arnoux p01295454z Test probes with 4 mm socket CAT IV and CAT III 1000 V PVC red and black
These insulated test probes from Chauvin Arnoux are designed for use in electrical installations complying with safety categories CAT III and CAT IV. They are specifically designed for measurements up ... Lieske Part No.: 586938 Mfg Part No: p01295454z |
14,16 EUR
≈ £11.81 | ≈ $15.82
On order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Chauvin Arnoux P01102084A Rod for continuity testing
This product from Chauvin Arnoux is a set of three extension pieces for continuity testing, with a total length of 90 cm, where each individual piece has a length of 30 cm. It is used to extend test ... Lieske Part No.: 854521 Mfg Part No: P01102084A |
93,10 EUR
≈ £77.65 | ≈ $103.99
On order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Chauvin Arnoux P01295451Z Test leads with 4 mm straight/angle plug, 1.5 m, 15 A, CAT IV, 1000 V, PVC, red + black
These measurement leads from the Premium series by Chauvin Arnoux are designed for use in electrical installations, particularly in environments with high safety requirements. They consist of ... Lieske Part No.: 866492 Mfg Part No: P01295451Z |
31,36 EUR
≈ £26.15 | ≈ $35.03
On order · Delivery time approx. 20 workdaysinfo_outline
|