Installation Material from Cellpack

The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 605577

The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 367858

The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 930477

Die Warmschrumpfschläuche vom Typ SR1F3 sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 3:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz.
Sales unit: 10 pieces
Lieske Part No.: 490906

The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 840910

The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 809728

The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 121592

The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 549466

The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 127745

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 637335

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 810303

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 371770

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 409661

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 332623

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 434590

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 632175

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 847662

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 702264

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 1316160

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 1316134

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 772815

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 703607

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 804756

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 709091

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 527578

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 305817

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 372143

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 804823

The heat shrink tubing type SB 2:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Lieske Part No.: 804785

The heat shrink tubing type SB 3:1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical areas of application are the protection of cables against chemical influences as well as good mechanical protection.
Lieske Part No.: 902535

The heat shrink tubing type SRFH3 is thick-walled, with thermoplastic adhesive with a shrink ratio of 3:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Sales unit: 10 pieces
Lieske Part No.: 729157

The heat shrink tubing type SRFH3 is thick-walled, with thermoplastic adhesive with a shrink ratio of 3:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Sales unit: 10 pieces
Lieske Part No.: 568653

The heat shrink tubing type SRFH3 is thick-walled, with thermoplastic adhesive with a shrink ratio of 3:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Sales unit: 5 pieces
Lieske Part No.: 780575

The heat shrink tubing type SRFH3 is thick-walled, with thermoplastic adhesive with a shrink ratio of 3:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Sales unit: 5 meters
Lieske Part No.: 180449

The heat shrink tubing type SR3 is thick-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Sales unit: 5 pieces
Lieske Part No.: 1013523

The heat shrink tubing type SR3 is thick-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Lieske Part No.: 256952

The SRAT type heat shrink tubing is thick-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include wire insulation tubing for terminations from 3.6 to 42 kV and protection against corrosion.
Sales unit: 30 meters
Lieske Part No.: 960711

The SRAT type heat shrink tubing is thick-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include wire insulation tubing for terminations from 3.6 to 42 kV and protection against corrosion.
Sales unit: 30 meters
Lieske Part No.: 1578852

The SRAT type heat shrink tubing is thick-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include wire insulation tubing for terminations from 3.6 to 42 kV and protection against corrosion.
Sales unit: 5 pieces
Lieske Part No.: 810389

The SRAT type heat shrink tubing is thick-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include wire insulation tubing for terminations from 3.6 to 42 kV and protection against corrosion.
Sales unit: 5 pieces
Lieske Part No.: 549257

The SRAT type heat shrink tubing is thick-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include wire insulation tubing for terminations from 3.6 to 42 kV and protection against corrosion.
Sales unit: 5 pieces
Lieske Part No.: 960682

The SRAT type heat shrink tubing is thick-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include wire insulation tubing for terminations from 3.6 to 42 kV and protection against corrosion.
Sales unit: 5 pieces
Lieske Part No.: 175981

The SRAT type heat shrink tubing is thick-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include wire insulation tubing for terminations from 3.6 to 42 kV and protection against corrosion.
Sales unit: 5 pieces
Lieske Part No.: 960662

Die Warmschrumpfschläuche vom Typ SRUM sind mittelwandig, mit thermoplastischem Kleber mit einer Schrumpfrate 4:1. Typische Anwendungsgebiete sind der Druck- und Feuchtigkeitsschutz von Kabeln sowie die Verwendung in Schrumpfmuffen und Schrumpfendverschlu¨ssen.
Sales unit: 150 meters
Lieske Part No.: 490877

The SRUM type heat shrink tubing is medium-walled, with thermoplastic adhesive with a shrink ratio of 4:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Sales unit: 100 meters
Lieske Part No.: 1316307

The SRUM type heat shrink tubing is medium-walled, with thermoplastic adhesive with a shrink ratio of 4:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Sales unit: 50 meters
Lieske Part No.: 734910

Universally usable for marking plastic cables in the connection area. Black shrink tubing with white print, 1 set = 1 piece each of L1, L2, L3, N.
Lieske Part No.: 926857

Universally usable for marking plastic cables in the connection area. Black shrink tubing with white print, 1 set = 1 piece each of L1, L2, L3, N.
Lieske Part No.: 913659

Universally usable for marking plastic cables in the connection area. Black shrink tubing with white print, 1 set = 1 piece each of L1, L2, L3, N.
Lieske Part No.: 492772

The heat shrink tubing type SRC1 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 235978