Installation Material from Cellpack

For repairing sheath damage to all plastic and rubber insulated cables and wires.
Lieske Part No.: 699125

For repairing sheath damage to all plastic and rubber insulated cables and wires.
Lieske Part No.: 914070

For repairing sheath damage to all plastic and rubber insulated cables and wires.
Lieske Part No.: 891051

For repairing sheath damage to all plastic and rubber insulated cables and wires.
Lieske Part No.: 508250

For repairing sheath damage to all plastic and rubber insulated cables and wires.
Lieske Part No.: 152716

For repairing sheath damage to all plastic and rubber insulated cables and wires.
Lieske Part No.: 298709

The heat shrink tubing type SR2 is medium-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Sales unit: 30 meters
Lieske Part No.: 806247

The heat shrink tubing type SR2 is medium-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Sales unit: 30 meters
Lieske Part No.: 1315398

The heat shrink tubing type SR2 is medium-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Sales unit: 30 meters
Lieske Part No.: 860855

The heat shrink tubing type SR2 is medium-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Sales unit: 30 meters
Lieske Part No.: 1578751

The heat shrink tubing type SR2 is medium-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Sales unit: 30 meters
Lieske Part No.: 575086

The heat shrink tubing type SR2 is medium-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Sales unit: 5 pieces
Lieske Part No.: 310049

The heat shrink tubing type SR2 is medium-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Sales unit: 5 pieces
Lieske Part No.: 718672

The heat shrink tubing type SRH2 is medium-walled, with thermoplastic adhesive with a shrink ratio of 3:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Sales unit: 5 pieces
Lieske Part No.: 514984

The heat shrink tubing type SRH2 is medium-walled, with thermoplastic adhesive with a shrink ratio of 3:1. Typical areas of application are pressure and moisture protection of cables as well as use in shrink sleeves and shrink end closures.
Sales unit: 5 pieces
Lieske Part No.: 562933

Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz.
Sales unit: 100 meters
Lieske Part No.: 490879

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 50 meters
Lieske Part No.: 1316304

Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz.
Sales unit: 50 meters
Lieske Part No.: 490882

Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz.
Sales unit: 50 meters
Lieske Part No.: 490881

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 50 meters
Lieske Part No.: 962944

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 50 meters
Lieske Part No.: 962854

Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz.
Sales unit: 50 meters
Lieske Part No.: 490888

Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz.
Sales unit: 50 meters
Lieske Part No.: 490887

Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz.
Sales unit: 50 meters
Lieske Part No.: 490892

Die Warmschrumpfschläuche vom Typ SR1F sind dünnwandig, ohne thermoplastischem Kleber mit einer Schrumpfrate 2:1. Typische Anwendungsgebiete sind der Schutz von Kabel gegen chemische Einflüsse sowie ein guter mechanische Schutz.
Sales unit: 25 meters
Lieske Part No.: 490848

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 300 meters
Lieske Part No.: 962348

The heat shrink tubing type SR1F is thin-walled, without thermoplastic adhesive and has a shrink ratio of 2:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 300 meters
Lieske Part No.: 960988

The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 150 meters
Lieske Part No.: 976778

The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 50 meters
Lieske Part No.: 971605

The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 50 meters
Lieske Part No.: 971640

The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 498438

The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 100282

The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 551327

The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 163988

The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 439043

The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 534678

The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 1315401

The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 636734

The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 meters
Lieske Part No.: 602504

The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 meters
Lieske Part No.: 130332

The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 900169

The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 254141

The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 650935

The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 811736

The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 518345

The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 432900

The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 1316301

The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 373697

The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 900286

The heat shrink tubing type SR1F3 is thin-walled, without thermoplastic adhesive and has a shrink ratio of 3:1. Typical applications include protecting cables against chemical influences and providing good mechanical protection.
Sales unit: 10 pieces
Lieske Part No.: 1315403