Products of BTR
Categories with products from BTR
- Electrics ➤ Cables ➤ Data lines ➤ Cat6 Patch Cable ( 93 )
- Electrics ➤ Industrial Material ➤ Automation ➤ Industrial bus systems ( 5 )
- Electrics ➤ Industrial Material ➤ Enclosures / Chassis ➤ Profile, hat, copper busbars ( 1 )
- Electrics ➤ Industrial Material ➤ Industrial Connectors ➤ Small connector ( 39 )
- Electrics ➤ Industrial Material ➤ Industrial relays and contactors ➤ Switching units / measuring, control relay ( 2 )
- Electrics ➤ Installation ➤ Home Automation ➤ POWER EIB ( 14 )
- Electronics ➤ Measurement ➤ Cable Testers ( 1 )
- Electronics ➤ Measurement ➤ Other Measuring Devices ( 1 )
- IT-Equipment ➤ Networks ➤ Fiber and Components ( 417 )
- IT-Equipment ➤ Networks ➤ Industrial Networking ➤ Media Converters ( 1 )
- IT-Equipment ➤ Networks ➤ Junction boxes ➤ Miscellaneous ( 41 )
- Technology ➤ Telecommunication ➤ Telephone Systems ➤ Analog ( 1 )
- Technology ➤ Tools ➤ Miscellaneous ( 1 )
![]() |
![]() Response-delayed two-wire time relay with a fixed delay time. Compact, waterproof, encapsulated modular design. Insensitive to vibrations, bounce and wear-free due to the absence of mechanical ... Lieske Part No.: 2095382 Mfg Part No: 110098520067 |
36,88 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
![]() |
![]() The industrial Ethernet switch EDS208 is an entry level switch that supports IEEE 802.3/802.3u/802.3x with 10/100M, full/half-duplex, MDI/MDIX auto-sensing. Switches of the EDS208 series can be easily ... Lieske Part No.: 829624 Mfg Part No: 110196 |
216,86 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
![]() |
![]() The USB Network Interface is a low-cost, high-performance LONWORKS interface for USB-enabled PCs and controllers. The U10 USB Network Interface connects directly to a TP/FT10 Free Topology Twisted ... Lieske Part No.: 829640 Mfg Part No: 110214 |
316,37 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
![]() |
![]() Undervoltage monitoring in three-phase networks (each phase against neutral conductor) with a fixed threshold value, fixed hysteresis and integrated test button. It was specially developed for ... Lieske Part No.: 2092651 Mfg Part No: 11027170 |
69,25 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
![]() |
![]() The time relay is used to extend pulses. If the control contact is closed for at least 5 ms, the relay is activated and de-activated after the set pulse time has elapsed. Further control pulses during ... Lieske Part No.: 2095054 Mfg Part No: 11027613 |
88,39 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
![]() |
![]() The monitoring relay for monitoring the correct phase sequence L1-L2-L3 (clockwise rotation) and monitoring the individual phase voltages for total failure. The phase voltages to be monitored are ... Lieske Part No.: 2091663 Mfg Part No: 110292032230 |
100,11 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
![]() |
![]() The HUB DC is used as a ballast for the operation of C|Logline LON, Modbus and BACnet I/O modules for the rectification and smoothing of 24 V AC (alternating voltage). It supplies a smoothed direct ... Lieske Part No.: 2096086 Mfg Part No: 110486 |
45,68 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
![]() |
![]() The potential isolator/signal converter is used to separate analog signals in the range of 0 to 10 V DC and 0 to 20 mA DC or to convert signals from 0 to 10 V DC to 0 to 20 mA DC or 0 to 20 mA DC to 0 ... Lieske Part No.: 2095053 Mfg Part No: 110502 |
96,53 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
![]() |
![]() Relay modules are used for potential separation between logic and load., Connection with screw terminals, 2-level relay socket, plug-in relay, with labeling field, socket, retaining bracket and LED ... Lieske Part No.: 2095072 Mfg Part No: 11050705 |
16,69 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
![]() |
![]() Relay module for large loads such as lamp loads, motors and drives for potential separation between logic and load. Connection with screw terminals, 2-level relay socket, plug-in relay, with label ... Lieske Part No.: 2091662 Mfg Part No: 11051105 |
21,27 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
![]() |
![]() The NG4-F power supply unit supplies a regulated direct voltage of 24 V DC / 16 W to supply devices in the I/O components product family. The secondary voltage can only be tapped on the right-hand ... Lieske Part No.: 2092809 Mfg Part No: 11056170 |
110,25 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
![]() |
![]() The threshold switch is used to switch units, pumps, fans, burners, etc. As soon as the input voltage reaches the switching threshold, the relay switches on. If the input voltage falls below the ... Lieske Part No.: 2092807 Mfg Part No: 11066670 |
62,32 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
![]() |
![]() The coupling module is designed for a two-stage motor control. Connection with spring-loaded terminals (push-in), relays mutually interlocked, manual control level Lieske Part No.: 2092808 Mfg Part No: 11066813272270 |
68,92 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
![]() |
![]() Clock generator with separately adjustable delay and pulse time. The time ranges can be programmed using the coding switch installed on the front. Connection with screw terminals, clocking, adjustable ... Lieske Part No.: 2095056 Mfg Part No: 11067441203030 |
72,34 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
![]() |
![]() Clock generator with separately adjustable delay and pulse time. The time ranges can be programmed using the coding switch installed on the front. Connection with screw terminals, clocking, adjustable ... Lieske Part No.: 2095055 Mfg Part No: 11067441203131 |
72,34 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
![]() |
![]() The label plate was specially designed for analogue value sensors with spring-loaded terminals. Particular emphasis was placed on an area for the equipment identification and an area for the plain ... Lieske Part No.: 2095100 Mfg Part No: 110727 |
0,46 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
![]() |
![]() The analog value transmitter is used for manual setting of the actuating variable, e.g. for mixing flaps, valve positions, temperature values, etc. The module can be controlled by two operating modes, ... Lieske Part No.: 2090274 Mfg Part No: 11073001 |
39,79 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
![]() |
![]() With the USB to RS485 converter, devices with a serial UART interface can be connected to USB quickly and easily. The transparent USB connector contains LEDs to display the Tx and Rx data traffic on ... Lieske Part No.: 2095429 Mfg Part No: 11080101 |
100,79 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
![]() |
![]() The MB-DIO2/1-IP 230 V module in an IP65 housing with 2 digital inputs and 1 relay output is designed for decentralized switching tasks. Suitable for e.g. incorporating light switches and window ... Lieske Part No.: 2128545 Mfg Part No: 1108110526IP |
223,52 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
![]() |
![]() The MB-DIO2/1-IP 24 V module in an IP65 housing with 2 digital inputs and 1 relay output is suitable for receiving decentralized signaling contacts and controlling decentralized switching tasks. Lieske Part No.: 2128548 Mfg Part No: 1108111326IP |
218,66 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
![]() |
![]() The MB-DIO4/2-IP 230 V module in an IP65 housing with 4 digital inputs and 2 relay outputs is designed for decentralized switching tasks. Suitable for e.g. incorporating light switches and window ... Lieske Part No.: 2128549 Mfg Part No: 1108120526IP |
292,13 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
![]() |
![]() The MB-DIO4/2-IP 24 V module in an IP65 housing with 4 digital inputs and 2 relay outputs is suitable for receiving decentralized signaling contacts and controlling decentralized switching tasks. Lieske Part No.: 2128550 Mfg Part No: 1108121326IP |
284,70 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
![]() |
![]() The Modbus module with 4 digital triac outputs was developed for decentralized switching tasks. It is suitable for switching electrical components such as relays, contactors, HVAC valves, etc. The ... Lieske Part No.: 2095300 Mfg Part No: 11083013 |
162,95 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
![]() |
![]() The Modbus module with 10 digital inputs was developed for decentralized switching tasks. It is suitable for recording potential-free switch states, e.g. electrical limit switches on ventilation flaps ... Lieske Part No.: 2092652 Mfg Part No: 110831131970 |
148,23 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|